CLONING MODES AND SETTINGS
4.Exit the General Preferences screen by touching the Back icon. This will take you back to the previous Settings screen.
Database
This setting is covered in Chapter 6: The
Database/Barcode Option.
Password
This setting is used to set a password that restricts access to the Omniclone Xi™ unit. If a password is set, then every time that the unit is rebooted a password prompt will come up. As long as the user enters the correct password the unit will boot to the Main Splash Screen.
Setting a Password Step-by-Step
1.From anywhere in the menu system, press the Set button to enter the Settings menu.
2.Touch the “General Preferences” icon located in the lower left hand corner of the screen.
3.Touch the Password icon. If a password is not already set then an alphanumeric keypad will come up.
4.Enter a password that is nine characters or less. Do not use spaces or unusual characters.
5.Touch the OK key when done, the unit will reboot itself to the Password Entry Prompt.
6.Type in the password to access the Main Splash Screen.
Removing a Password
A password can only be removed by reloading the software on the Omniclone Xi™ unit. Please refer to Chapter 10: Software Loading Instructions for more details.
26 | Logicube Omniclone Xi ™ User’s Manual |