Logicube Omniclone Xi user manual Frequently Asked Questions and Answers

Page 59

FREQUENTLY ASKED QUESTIONS AND ANSWERS

Q: Can the Logicube Omniclone Xi™ clone partitions created with file systems such as UNIX, LINUX and HPFS?

A: Yes, but results are guaranteed only if they are cloned between identical Master and Target drives. However, partitions of some versions of UNIX will self-repair upon the first boot.

Q: Can the Logicube Omniclone Xi™ defragment a partition?

A: Yes. Refer to Chapter 4: Cloning Modes and Settings for information on using Selective Partitions to defragment a FAT partition while cloning.

Q: Can the Logicube Omniclone Xi™ clone between dissimilar drives?

A: Yes. For Master drives that contain FAT16, FAT32 and NTFS partitions, the Logicube Omniclone Xi™ will take care of all the necessary adjustments to ensure that a Target drive of any size will be valid and bootable. Many combinations of Master and Target drives sizes up to 300 GB were tested and found to be valid.

Unknown partition types, however, are cloned in mirror mode and typically require very similar if not identical Master and Target drives to guarantee a successful clone.

Q: Can I clone to/from drives larger than 8.5 Gigabytes?

A: Yes. The Omniclone Xi™ was designed to support drives larger than 137 GB in capacity. However, note that some PC's cannot "see" drives larger than 8.5 GB due to BIOS limitations.

Q: Can I clone from a larger drive to a smaller drive?

A: Yes, as long as the data content of each Master partition is able to fit into the scaled down size of the corresponding Target partition. Otherwise, an error message will be displayed indicating that the Solitaire Turbo™ is unable to fit the data onto the Target drive.

The error "Cannot fit data to Target" can also be caused by a badly fragmented Master drive. In such cases, defragmenting the Master will generally resolve the issue.

Note that an NTFS partition can only be scaled down by approximately 55% due to the master file table (MFT) that resides in the center of the partition.

Q: Can I clone to/from laptop drives?

A: Yes. Logicube sells 2.5" drive adapters, and can provide adapters to many of the special drive connections on the market. Please call for availability.

Logicube Omniclone Xi ™ User’s Manual

53

Image 59
Contents Phone 818 700 Fax 818 700 Version Date 2/20/06 Logicube, Inc Chatsworth, CALogicube Disclaimer Limitation of Liability and Warranty InformationWarranty Table of Contents Omnidiagnostics Loading Software Through the Parallel Port Logicube Omniclone Xi Software UpdatePage Introduction Introduction to the Logicube OmnicloneIntroduction FeaturesSystem description Using this guideIntroduction Logicube Omniclone Introduction Getting Started Fast Start Applying power to the Logicube OmnicloneConnecting Parallel IDE, EIDE, Udma Drives Connecting other types of drives Connecting Serial ATA Sata DrivesCalibrating the Touch Screen Power and Reset buttonsUser interface Touch ScreenButtons Indicator LightsButtons and Interface Installing and Removing the Light BarAbout Screen Cloning Modes and SettingsTime/Date Settings Main Menu ScreenDrives CloningClever Clone Step-by-Step Clever Clone ModeSelective Partitions Mode Optional Selective Partitions Step-by-Step CleverCopy Mirror Clone Step-by-Step Mirror Clone ModeMaster Manager Step-by-Step Master Manager Mode OptionalDell Optiplex Computers and Master Manager Verify Optional Preference SettingsVerify Settings Speed CHS Translation Modes GeometryIntroduction On Error OptionalGeneral Preferences Set Option On Error Step-by-StepLast Drive Step-by-Step Set Option Step-by-StepLast Drive Database Database/Barcode Option PasswordSetting a Password Step-by-Step Removing a PasswordScan Target Mode OmniDiagnosticsOmniDiagnostics Features Repair Target Mode Scan Target Mode Step-by-StepWipeClean Target Mode Repair Target Mode Step-by-StepWipeclean Target Step-by-Step WipeClean SettingsOmnidiagnostics Compact Flash CF Files System ContentsDatabase/Barcode Option Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Barcode Scanner SettingsDATABASE/BARCODE Option Minimum requirements Using the USB PortRemoving USB devices How to use under Windows for Master Drive ManagementUsing the USB Port Compact Flash CF Card Connecting Through the Software Setup Menu Connecting the CF Drive to Windows via USBCompact Flash CF Card Drive Cables User Replaceable HardwareDrive Stations Removal and Installation of a Drive StationProper Handling of Drive Cables Removal and Installation of the Power Supply Power SupplySoftware Loading Instructions Logicube Omniclone Xi Software Updating ProceduresLoading Software Using the Compact Flash Host PC preparation Software Loading InstructionsLogicube Omniclone Xi Software Update FAQ’s Frequently Asked Questions and AnswersFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cluster ReferenceGlossary Cloning, Hard DriveDefragment ReferenceMaster Drive, Logicube Omniclone Geometry, Hard DriveLarge Partition Master/Single Drive, IDEParallel Port Slave Drive, IDE RAM DiskSector Wiping, Data Target Drive, Logicube OmnicloneTranslation Mode, CHS Fdisk IndexIndex Reference Index