Logicube Omniclone Xi user manual Creating a New Config List, Step-by-Step

Page 43

THE DATABASE/BARCODE OPTION

NOTE: Any standard printer can be used as long as it is able to print from plain ASCII codes.

Manage Database – This allows the user to delete one or more Config Lists from the Config.txt file.

Create Config – This setting allows the user to create a new Config List. Once the list is finished, it is saved to the Config.txt file.

Creating a New Config List, Step-by-Step

1.From the Main Screen, press the Set button to go to the Settings Menu, then touch the General Preferences icon, followed by the Database icon. Once in the Database Menu, touch the Create Config. icon.

2.Touch the checkbox next to each line of data you want to add to the Config List. When the line is selected, a checkmark will appear.

3.When the “Scan1”, “Scan2” or “Scan3” lines are chosen, an alphanumeric keypad will come up on the touch screen. Enter a label for the Scan line and touch OK when finished. This label is later used in the Scan prompt that appears at the end of the cloning session.

NOTE: Pressing the ALT button on the alphanumeric keypad will bring up lower-case letters. Pressing ALT again will bring up numbers as well as special characters ($, %, &, etc.). Pressing ALT again goes back to capital letters.

4.Once the desired lines have been chosen, touch OK to go to another alphanumeric keypad. Enter a title for the Config List.

NOTE: Config List names as well as Scan Line labels can be 18 characters or less (including spaces).

5.Once a name has been entered, touch OK to go back to the Database Settings screen.

NOTE: Config Lists can also be created or modified with a Text Editor in a PC (i.e. Notepad.exe for Windows). Make sure that the correct formatting is followed if this method is used.

Logicube Omniclone Xi ™ User’s Manual

37

Image 43
Contents Phone 818 700 Fax 818 700 Version Date 2/20/06 Logicube, Inc Chatsworth, CAWarranty Limitation of Liability and Warranty InformationLogicube Disclaimer Table of Contents Omnidiagnostics Loading Software Through the Parallel Port Logicube Omniclone Xi Software UpdatePage Introduction Introduction to the Logicube OmnicloneIntroduction FeaturesSystem description Using this guideIntroduction Logicube Omniclone Introduction Connecting Parallel IDE, EIDE, Udma Drives Applying power to the Logicube OmnicloneGetting Started Fast Start Connecting other types of drives Connecting Serial ATA Sata DrivesCalibrating the Touch Screen Power and Reset buttonsUser interface Touch ScreenButtons Indicator LightsButtons and Interface Installing and Removing the Light BarAbout Screen Cloning Modes and SettingsTime/Date Settings Main Menu ScreenDrives CloningSelective Partitions Mode Optional Clever Clone ModeClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Step-by-Step Mirror Clone ModeMaster Manager Step-by-Step Master Manager Mode OptionalDell Optiplex Computers and Master Manager Verify Settings Optional Preference SettingsVerify Speed CHS Translation Modes GeometryGeneral Preferences On Error OptionalIntroduction Set Option On Error Step-by-StepLast Drive Set Option Step-by-StepLast Drive Step-by-Step Database Database/Barcode Option PasswordSetting a Password Step-by-Step Removing a PasswordOmniDiagnostics Features OmniDiagnosticsScan Target Mode Repair Target Mode Scan Target Mode Step-by-StepWipeClean Target Mode Repair Target Mode Step-by-StepWipeclean Target Step-by-Step WipeClean SettingsOmnidiagnostics Database/Barcode Option System ContentsCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Barcode Scanner SettingsDATABASE/BARCODE Option Minimum requirements Using the USB PortRemoving USB devices How to use under Windows for Master Drive ManagementUsing the USB Port Compact Flash CF Card Connecting Through the Software Setup Menu Connecting the CF Drive to Windows via USBCompact Flash CF Card Drive Cables User Replaceable HardwareProper Handling of Drive Cables Removal and Installation of a Drive StationDrive Stations Removal and Installation of the Power Supply Power SupplyLoading Software Using the Compact Flash Logicube Omniclone Xi Software Updating ProceduresSoftware Loading Instructions Host PC preparation Software Loading InstructionsLogicube Omniclone Xi Software Update FAQ’s Frequently Asked Questions and AnswersFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cluster ReferenceGlossary Cloning, Hard DriveDefragment ReferenceLarge Geometry, Hard DriveMaster Drive, Logicube Omniclone Parallel Port Master/Single Drive, IDEPartition Sector RAM DiskSlave Drive, IDE Translation Mode, CHS Target Drive, Logicube OmnicloneWiping, Data Fdisk IndexIndex Reference Index