Logicube Omniclone Xi user manual Geometry, Hard Drive, Large, Master Drive, Logicube Omniclone

Page 66

REFERENCE

65,536 clusters while FAT32 allows for enough clusters to support up to two terabytes of data.

Geometry, Hard Drive

Hard drive geometry is the set of physical characteristics that belongs to a particular drive, specifically:

The number of platters and cylinders

The number of tracks per cylinder

The number of sectors per track, and

The size of each sector (in bytes)

IDE (Integrated Drive Electronics)

An electronic interface used for transferring data between a computer and the computer's hard drive. Most new computers use an advanced version of IDE called Enhanced Integrated Drive Electronics (EIDE).

Large

Also called Extended CHS (ECHS) in some BIOS versions, Large is a BIOS translation mode that extends the 504 MB drive size barrier of the standard CHS mode to 4.2 GB.

LBA (Logical Block Addressing)

A translation mode that converts the cylinder, head, and sector specifications of a hard drive into logical addresses that can be processed by the BIOS. LBA supports drives up to 32 GB or larger depending upon the limitations of the BIOS. To use, it must be supported by both the BIOS and the drive.

Master Drive, Logicube Omniclone Xi™

The hard drive from which the Logicube Omniclone Xi™ is copying data to the Target drive. The Master drive is commonly the one placed inside the Logicube Omniclone Xi™.

Not to be confused with IDE Master/Single Drive.

60

Logicube Omniclone Xi ™ User’s Manual

Image 66
Contents Logicube, Inc Chatsworth, CA Phone 818 700 Fax 818 700 Version Date 2/20/06Limitation of Liability and Warranty Information WarrantyLogicube Disclaimer Table of Contents Omnidiagnostics Logicube Omniclone Xi Software Update Loading Software Through the Parallel PortPage Introduction to the Logicube Omniclone IntroductionFeatures IntroductionUsing this guide System descriptionIntroduction Logicube Omniclone Introduction Applying power to the Logicube Omniclone Connecting Parallel IDE, EIDE, Udma DrivesGetting Started Fast Start Connecting Serial ATA Sata Drives Connecting other types of drivesTouch Screen Power and Reset buttonsUser interface Calibrating the Touch ScreenIndicator Lights ButtonsInstalling and Removing the Light Bar Buttons and InterfaceMain Menu Screen Cloning Modes and SettingsTime/Date Settings About ScreenCloning DrivesClever Clone Mode Selective Partitions Mode OptionalClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Mode Mirror Clone Step-by-StepMaster Manager Mode Optional Master Manager Step-by-StepDell Optiplex Computers and Master Manager Optional Preference Settings Verify SettingsVerify Speed Geometry CHS Translation ModesOn Error Optional General PreferencesIntroduction On Error Step-by-Step Set OptionSet Option Step-by-Step Last DriveLast Drive Step-by-Step Removing a Password Database/Barcode Option PasswordSetting a Password Step-by-Step DatabaseOmniDiagnostics OmniDiagnostics FeaturesScan Target Mode Scan Target Mode Step-by-Step Repair Target ModeRepair Target Mode Step-by-Step WipeClean Target ModeWipeClean Settings Wipeclean Target Step-by-StepOmnidiagnostics System Contents Database/Barcode OptionCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Settings Barcode ScannerDATABASE/BARCODE Option Using the USB Port Minimum requirementsHow to use under Windows for Master Drive Management Removing USB devicesUsing the USB Port Compact Flash CF Card Connecting the CF Drive to Windows via USB Connecting Through the Software Setup MenuCompact Flash CF Card User Replaceable Hardware Drive CablesRemoval and Installation of a Drive Station Proper Handling of Drive CablesDrive Stations Power Supply Removal and Installation of the Power SupplyLogicube Omniclone Xi Software Updating Procedures Loading Software Using the Compact FlashSoftware Loading Instructions Software Loading Instructions Host PC preparationLogicube Omniclone Xi Software Update Frequently Asked Questions and Answers FAQ’sFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cloning, Hard Drive ReferenceGlossary ClusterReference DefragmentGeometry, Hard Drive LargeMaster Drive, Logicube Omniclone Master/Single Drive, IDE Parallel PortPartition RAM Disk SectorSlave Drive, IDE Target Drive, Logicube Omniclone Translation Mode, CHSWiping, Data Index FdiskIndex Reference Index