Logicube Omniclone Xi user manual Scan Target Mode Step-by-Step, Repair Target Mode

Page 34

OMNIDIAGNOSTICS™

∙Fast (Default) – This is the fastest.

∙Thorough – This is the most thorough.

The Thorough operation writes patterns to some sectors, which can cause data corruption. Use this setting only when data loss is not an issue.

Scan Target Mode Step-by-Step

1.From anywhere in the menu system, press the Set button to enter the Settings menu.

2.Press the Cloning Mode icon that appears in the upper left-hand corner. A list of the available cloning modes appears.

3.Press the “Scan” icon, the Scan Target™ settings screen will appear.

4.Adjust the “SPEED” setting as needed.

5.You may now double-click the “Start/Stop” button to start cloning. You will be warned that continuing will modify your Destination drive. If you are ready to do this, choose “Yes” to continue.

6.When finished, the Logicube Omniclone Xi™ will notify you and display a list of the scanned drives along with bad or weak sectors found on each drive.

7.After reviewing the summary, touch the Back icon to return to the main menu.

Repair Target Mode

Repair Target mode scans Target drives using a Logicube exclusive algorithm in an attempt to repair all weak and bad sectors encountered. Please note that this process can take a long time.

The Repair Target operation directly manipulates the contents of the Target drive with no effort being made to retain the original data. It does not prompt the user when a bad sector is reallocated so any data on a repaired sector is lost.

28	Logicube Omniclone Xi ™ User’s Manual

Image 34

Contents Logicube, Inc Chatsworth, CA Phone 818 700 Fax 818 700 Version Date 2/20/06Warranty Limitation of Liability and Warranty InformationLogicube Disclaimer Table of Contents Omnidiagnostics Logicube Omniclone Xi Software Update Loading Software Through the Parallel PortPage Introduction to the Logicube Omniclone IntroductionFeatures IntroductionUsing this guide System descriptionIntroduction Logicube Omniclone Introduction Connecting Parallel IDE, EIDE, Udma Drives Applying power to the Logicube OmnicloneGetting Started Fast Start Connecting Serial ATA Sata Drives Connecting other types of drivesTouch Screen Power and Reset buttonsUser interface Calibrating the Touch ScreenIndicator Lights ButtonsInstalling and Removing the Light Bar Buttons and InterfaceMain Menu Screen Cloning Modes and SettingsTime/Date Settings About ScreenCloning DrivesSelective Partitions Mode Optional Clever Clone ModeClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Mode Mirror Clone Step-by-StepMaster Manager Mode Optional Master Manager Step-by-StepDell Optiplex Computers and Master Manager Verify Settings Optional Preference SettingsVerify Speed Geometry CHS Translation ModesGeneral Preferences On Error OptionalIntroduction On Error Step-by-Step Set OptionLast Drive Set Option Step-by-StepLast Drive Step-by-Step Removing a Password Database/Barcode Option PasswordSetting a Password Step-by-Step DatabaseOmniDiagnostics Features OmniDiagnosticsScan Target Mode Scan Target Mode Step-by-Step Repair Target ModeRepair Target Mode Step-by-Step WipeClean Target ModeWipeClean Settings Wipeclean Target Step-by-StepOmnidiagnostics Database/Barcode Option System ContentsCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Settings Barcode ScannerDATABASE/BARCODE Option Using the USB Port Minimum requirementsHow to use under Windows for Master Drive Management Removing USB devicesUsing the USB Port Compact Flash CF Card Connecting the CF Drive to Windows via USB Connecting Through the Software Setup MenuCompact Flash CF Card User Replaceable Hardware Drive CablesProper Handling of Drive Cables Removal and Installation of a Drive StationDrive Stations Power Supply Removal and Installation of the Power SupplyLoading Software Using the Compact Flash Logicube Omniclone Xi Software Updating ProceduresSoftware Loading Instructions Software Loading Instructions Host PC preparationLogicube Omniclone Xi Software Update Frequently Asked Questions and Answers FAQ’sFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cloning, Hard Drive ReferenceGlossary ClusterReference DefragmentLarge Geometry, Hard DriveMaster Drive, Logicube Omniclone Parallel Port Master/Single Drive, IDEPartition Sector RAM DiskSlave Drive, IDE Translation Mode, CHS Target Drive, Logicube OmnicloneWiping, Data Index FdiskIndex Reference Index