Logicube Omniclone Xi user manual Mirror Clone Mode, Mirror Clone Step-by-Step

Page 23

CLONING MODES AND SETTINGS

Mirror

Simple partition mirror (no adjustments)

None

Do not copy this partition

Mirror Clone™ Mode

This mode simply makes a bit-by-bit mirror copy of the Master drive. It does not adjust any values. This mode is only recommended when all else fails and even then only between similar geometry drives. It is also recommended for non-Windows partitions like UNIX, LINUX and other such systems.

NOTE: Drives in a RAID array have dynamic or striped partitions and also need to be Mirror Cloned. When cloning a multiple drive RAID array, each drive in the array needs to be Mirror cloned to an identical Target drive.

You can dial the percentage of Master disk you wish to mirror. For example, setting to 50% will mirror the first 50% of the Master drive’s size.

Mirror Clone™ Step-by-Step

1.From anywhere in the menu system click the “Set” button to enter the Settings menu.

2.Press the Cloning Mode icon that appears in the upper left-hand corner. A list of the available cloning modes appears.

3.Press the “Mirror” icon.

4.A screen appears asking you what percentage of the Master drive to clone. Touch the numeric keypad to adjust this value from 0 – 100%. If a value of 99% or less is chosen for the FRONT of the drive, the unit will also ask for a percentage from the REAR of the drive. This value can be set to the total size of the remaining space.

For example, if you were to enter 20 for the front and 30 for the back, Mirror Clone would copy the first 20% of the Master drive, skip over the next 50% and clone the remaining 30%.

5.You may now double-click the “Start/Stop” button to start cloning.

Logicube Omniclone Xi ™ User’s Manual

17

Image 23
Contents Phone 818 700 Fax 818 700 Version Date 2/20/06 Logicube, Inc Chatsworth, CALogicube Disclaimer Limitation of Liability and Warranty InformationWarranty Table of Contents Omnidiagnostics Loading Software Through the Parallel Port Logicube Omniclone Xi Software UpdatePage Introduction Introduction to the Logicube OmnicloneIntroduction FeaturesSystem description Using this guideIntroduction Logicube Omniclone Introduction Getting Started Fast Start Applying power to the Logicube OmnicloneConnecting Parallel IDE, EIDE, Udma Drives Connecting other types of drives Connecting Serial ATA Sata DrivesCalibrating the Touch Screen Power and Reset buttonsUser interface Touch ScreenButtons Indicator LightsButtons and Interface Installing and Removing the Light BarAbout Screen Cloning Modes and SettingsTime/Date Settings Main Menu ScreenDrives CloningClever Clone Step-by-Step Clever Clone ModeSelective Partitions Mode Optional Selective Partitions Step-by-Step CleverCopy Mirror Clone Step-by-Step Mirror Clone ModeMaster Manager Step-by-Step Master Manager Mode OptionalDell Optiplex Computers and Master Manager Verify Optional Preference SettingsVerify Settings Speed CHS Translation Modes GeometryIntroduction On Error OptionalGeneral Preferences Set Option On Error Step-by-StepLast Drive Step-by-Step Set Option Step-by-StepLast Drive Database Database/Barcode Option PasswordSetting a Password Step-by-Step Removing a PasswordScan Target Mode OmniDiagnosticsOmniDiagnostics Features Repair Target Mode Scan Target Mode Step-by-StepWipeClean Target Mode Repair Target Mode Step-by-StepWipeclean Target Step-by-Step WipeClean SettingsOmnidiagnostics Compact Flash CF Files System ContentsDatabase/Barcode Option Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Barcode Scanner SettingsDATABASE/BARCODE Option Minimum requirements Using the USB PortRemoving USB devices How to use under Windows for Master Drive ManagementUsing the USB Port Compact Flash CF Card Connecting Through the Software Setup Menu Connecting the CF Drive to Windows via USBCompact Flash CF Card Drive Cables User Replaceable HardwareDrive Stations Removal and Installation of a Drive StationProper Handling of Drive Cables Removal and Installation of the Power Supply Power SupplySoftware Loading Instructions Logicube Omniclone Xi Software Updating ProceduresLoading Software Using the Compact Flash Host PC preparation Software Loading InstructionsLogicube Omniclone Xi Software Update FAQ’s Frequently Asked Questions and AnswersFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cluster ReferenceGlossary Cloning, Hard DriveDefragment ReferenceMaster Drive, Logicube Omniclone Geometry, Hard DriveLarge Partition Master/Single Drive, IDEParallel Port Slave Drive, IDE RAM DiskSector Wiping, Data Target Drive, Logicube OmnicloneTranslation Mode, CHS Fdisk IndexIndex Reference Index