CLONING MODES AND SETTINGS
the license key, follow this procedure to enter it into your Logicube Omniclone Xi ™.
Set Option Step-by-Step
1.From anywhere in the menu system, press the Set button to enter the Settings menu.
2.Touch the “General Preferences” icon located in the lower left hand corner of the screen.
3.Touch the Set Option icon, a numeric keypad will come up. Type in the
4.If the code is typed in correctly, a message reading “Option Enabled” will appear. The unit will then reboot itself.
5.If the code is entered incorrectly, the display will go back to the General Preferences screen.
6.If you cannot enter the code, exit the General Preferences screen by touching the Back icon. This will take you back to the previous Settings screen.
Last Drive
This setting allows the user to determine the maximum number of Target drives that can be cloned on the Omniclone Xi™ unit at one time. For example, an OCXi that normally clones 10 Target drives can be set to clone 5 drives. The first 5 Target positions would be active while the remaining Target positions would be turned off. This reduces the cloning time slightly because the unit knows not to access drive positions that are not used.
Last Drive Step-by-Step
1.From anywhere in the menu system, press the Set button to enter the Settings menu.
2.Touch the “General Preferences” icon located in the lower left hand corner of the screen.
3.Touch the Last Drives icon, a numeric keypad will come up. Type in the maximum number of drives that you wish to clone. The number can range from 1 to 10. Press OK when finished.
Logicube Omniclone Xi ™ User’s Manual | 25 |