Logicube user manual Logicube Omniclone Xi Software Update

Page 57

SOFTWARE LOADING INSTRUCTIONS

Note: Windows 2000 and NT that have NTFS file systems cannot be used since NTFS is not accessible through DOS. The file systems that are compatible include FAT16 and FAT32. One possible workaround for this is to configure the boot diskette to create a RAMDRIVE and then copy and run the update files from that drive.

Logicube Omniclone Xi™ Software Update

Note: Make sure the update is running on the PC and the Logicube Omniclone Xi™ is connected to the host PC via the supplied parallel cable.

1.Remove the Master Drive from the unit if it is connected.

2.Boot The Logicube Omniclone Xi™ while holding down the Start/Stop button. The unit will boot to the Software Setup Menu.

3.Use the Select button to Scroll down to “Load SW to P.Port”. Press the Start/Stop button.

4.Follow any LCD on-screen prompts. The PC should indicate that the software update is loading. The update will run for one to three minutes after which the Logicube Omniclone Xi™ will restart.

5.Check the version and date of this software by pressing the “About” icon at the main menu screen.

Logicube Omniclone Xi ™ User’s Manual

51

Image 57

Contents Phone 818 700 Fax 818 700 Version Date 2/20/06 Logicube, Inc Chatsworth, CALimitation of Liability and Warranty Information WarrantyLogicube Disclaimer Table of Contents Omnidiagnostics Loading Software Through the Parallel Port Logicube Omniclone Xi Software UpdatePage Introduction Introduction to the Logicube OmnicloneIntroduction FeaturesSystem description Using this guideIntroduction Logicube Omniclone Introduction Applying power to the Logicube Omniclone Connecting Parallel IDE, EIDE, Udma DrivesGetting Started Fast Start Connecting other types of drives Connecting Serial ATA Sata DrivesUser interface Power and Reset buttonsTouch Screen Calibrating the Touch ScreenButtons Indicator LightsButtons and Interface Installing and Removing the Light BarTime/Date Settings Cloning Modes and SettingsMain Menu Screen About ScreenDrives CloningClever Clone Mode Selective Partitions Mode OptionalClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Step-by-Step Mirror Clone ModeMaster Manager Step-by-Step Master Manager Mode OptionalDell Optiplex Computers and Master Manager Optional Preference Settings Verify SettingsVerify Speed CHS Translation Modes GeometryOn Error Optional General PreferencesIntroduction Set Option On Error Step-by-StepSet Option Step-by-Step Last DriveLast Drive Step-by-Step Setting a Password Step-by-Step Database/Barcode Option PasswordRemoving a Password DatabaseOmniDiagnostics OmniDiagnostics FeaturesScan Target Mode Repair Target Mode Scan Target Mode Step-by-StepWipeClean Target Mode Repair Target Mode Step-by-StepWipeclean Target Step-by-Step WipeClean SettingsOmnidiagnostics System Contents Database/Barcode OptionCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Barcode Scanner SettingsDATABASE/BARCODE Option Minimum requirements Using the USB PortRemoving USB devices How to use under Windows for Master Drive ManagementUsing the USB Port Compact Flash CF Card Connecting Through the Software Setup Menu Connecting the CF Drive to Windows via USBCompact Flash CF Card Drive Cables User Replaceable HardwareRemoval and Installation of a Drive Station Proper Handling of Drive CablesDrive Stations Removal and Installation of the Power Supply Power SupplyLogicube Omniclone Xi Software Updating Procedures Loading Software Using the Compact FlashSoftware Loading Instructions Host PC preparation Software Loading InstructionsLogicube Omniclone Xi Software Update FAQ’s Frequently Asked Questions and AnswersFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Glossary ReferenceCloning, Hard Drive ClusterDefragment ReferenceGeometry, Hard Drive LargeMaster Drive, Logicube Omniclone Master/Single Drive, IDE Parallel PortPartition RAM Disk SectorSlave Drive, IDE Target Drive, Logicube Omniclone Translation Mode, CHSWiping, Data Fdisk IndexIndex Reference Index