Logicube Omniclone Xi user manual Introduction

Page 10

INTRODUCTION

For the OCXi™ and OCX5i™: An AC power cord.

For the OCX2i™: An external 12VDC – 5.5A power supply.

A light bar that mounts on the back of the unit.

NOTE: The OCX2i™ does not come with a light bar, though one can be purchased separately.

A bootable CD-ROM containing:

A.A backup copy of the software that is already pre-installed on the Logicube Omniclone Xi™.

B.Software update utilities necessary to load the software on the unit.

C.Windows 98/ME drivers for connecting through the USB port.

D.An electronic copy of this manual.

A 64MB Compact Flash (CF) Memory Card. This Card is inserted into the slot in the back of the unit.

NOTE: It is highly recommended that the CF Card be left inside the Omniclone-Xi for optimal performance.

This manual.

NOTE: Please contact Logicube Technical Support at (818) 700-8488 X3 if any of the above pieces are missing.

4

Logicube Omniclone Xi ™ User’s Manual

Image 10
Contents Logicube, Inc Chatsworth, CA Phone 818 700 Fax 818 700 Version Date 2/20/06Warranty Limitation of Liability and Warranty InformationLogicube Disclaimer Table of Contents Omnidiagnostics Logicube Omniclone Xi Software Update Loading Software Through the Parallel PortPage Introduction to the Logicube Omniclone IntroductionFeatures IntroductionUsing this guide System descriptionIntroduction Logicube Omniclone Introduction Connecting Parallel IDE, EIDE, Udma Drives Applying power to the Logicube OmnicloneGetting Started Fast Start Connecting Serial ATA Sata Drives Connecting other types of drivesTouch Screen Power and Reset buttonsUser interface Calibrating the Touch ScreenIndicator Lights ButtonsInstalling and Removing the Light Bar Buttons and InterfaceMain Menu Screen Cloning Modes and SettingsTime/Date Settings About ScreenCloning DrivesSelective Partitions Mode Optional Clever Clone ModeClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Mode Mirror Clone Step-by-StepMaster Manager Mode Optional Master Manager Step-by-StepDell Optiplex Computers and Master Manager Verify Settings Optional Preference SettingsVerify Speed Geometry CHS Translation ModesGeneral Preferences On Error OptionalIntroduction On Error Step-by-Step Set OptionLast Drive Set Option Step-by-StepLast Drive Step-by-Step Removing a Password Database/Barcode Option PasswordSetting a Password Step-by-Step DatabaseOmniDiagnostics Features OmniDiagnosticsScan Target Mode Scan Target Mode Step-by-Step Repair Target ModeRepair Target Mode Step-by-Step WipeClean Target ModeWipeClean Settings Wipeclean Target Step-by-StepOmnidiagnostics Database/Barcode Option System ContentsCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Settings Barcode ScannerDATABASE/BARCODE Option Using the USB Port Minimum requirementsHow to use under Windows for Master Drive Management Removing USB devicesUsing the USB Port Compact Flash CF Card Connecting the CF Drive to Windows via USB Connecting Through the Software Setup MenuCompact Flash CF Card User Replaceable Hardware Drive CablesProper Handling of Drive Cables Removal and Installation of a Drive StationDrive Stations Power Supply Removal and Installation of the Power SupplyLoading Software Using the Compact Flash Logicube Omniclone Xi Software Updating ProceduresSoftware Loading Instructions Software Loading Instructions Host PC preparationLogicube Omniclone Xi Software Update Frequently Asked Questions and Answers FAQ’sFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cloning, Hard Drive ReferenceGlossary ClusterReference DefragmentLarge Geometry, Hard DriveMaster Drive, Logicube Omniclone Parallel Port Master/Single Drive, IDEPartition Sector RAM DiskSlave Drive, IDE Translation Mode, CHS Target Drive, Logicube OmnicloneWiping, Data Index FdiskIndex Reference Index