Logicube Omniclone Xi user manual Using the USB Port, Minimum requirements

Page 46

7. Using the USB Port

Introduction

The integral USB port on your Logicube Omniclone Xi™ provides connectivity of your CF drive or Master hard drive (the unit’s Master drive) to any USB-enabled PC. Both USB 1.1 and USB 2.0 are supported.

USB connectivity is available for the Master drive only. It allows the drive to connect to Windows as an external USB drive. If the Master partition is readable by Windows it will receive a drive letter and then can be accessed through Windows like any other drive.

Minimum requirements

∙A Logicube Omniclone Xi™ unit with integral USB port.

∙A 586 or better PC compatible computer with a floppy or CD-ROM drive.

∙An available USB port on the PC. USB 1.1 and USB 2.0 are automatically supported.

∙Microsoft Windows 98/98SE/ME/2000/XP operating system (for drive access under Windows).

∙A floppy disk or CD-ROM with Windows 98/98SE USB drivers installed. No drivers need be installed for ME/2000/XP.

Logicube Omniclone Xi ™ User’s Manual

40

Image 46

Contents Logicube, Inc Chatsworth, CA Phone 818 700 Fax 818 700 Version Date 2/20/06Warranty Limitation of Liability and Warranty InformationLogicube Disclaimer Table of Contents Omnidiagnostics Logicube Omniclone Xi Software Update Loading Software Through the Parallel PortPage Introduction to the Logicube Omniclone IntroductionFeatures IntroductionUsing this guide System descriptionIntroduction Logicube Omniclone Introduction Connecting Parallel IDE, EIDE, Udma Drives Applying power to the Logicube OmnicloneGetting Started Fast Start Connecting Serial ATA Sata Drives Connecting other types of drivesTouch Screen Power and Reset buttonsUser interface Calibrating the Touch ScreenIndicator Lights ButtonsInstalling and Removing the Light Bar Buttons and InterfaceMain Menu Screen Cloning Modes and SettingsTime/Date Settings About ScreenCloning DrivesSelective Partitions Mode Optional Clever Clone ModeClever Clone Step-by-Step Selective Partitions Step-by-Step CleverCopy Mirror Clone Mode Mirror Clone Step-by-StepMaster Manager Mode Optional Master Manager Step-by-StepDell Optiplex Computers and Master Manager Verify Settings Optional Preference SettingsVerify Speed Geometry CHS Translation ModesGeneral Preferences On Error OptionalIntroduction On Error Step-by-Step Set OptionLast Drive Set Option Step-by-StepLast Drive Step-by-Step Removing a Password Database/Barcode Option PasswordSetting a Password Step-by-Step DatabaseOmniDiagnostics Features OmniDiagnosticsScan Target Mode Scan Target Mode Step-by-Step Repair Target ModeRepair Target Mode Step-by-Step WipeClean Target ModeWipeClean Settings Wipeclean Target Step-by-StepOmnidiagnostics Database/Barcode Option System ContentsCompact Flash CF Files Breakdown of Config.txt Database.csv Database Step-by-Step Database Settings Menu Creating a New Config List, Step-by-Step Barcode Scanner Settings Barcode ScannerDATABASE/BARCODE Option Using the USB Port Minimum requirementsHow to use under Windows for Master Drive Management Removing USB devicesUsing the USB Port Compact Flash CF Card Connecting the CF Drive to Windows via USB Connecting Through the Software Setup MenuCompact Flash CF Card User Replaceable Hardware Drive CablesProper Handling of Drive Cables Removal and Installation of a Drive StationDrive Stations Power Supply Removal and Installation of the Power SupplyLoading Software Using the Compact Flash Logicube Omniclone Xi Software Updating ProceduresSoftware Loading Instructions Software Loading Instructions Host PC preparationLogicube Omniclone Xi Software Update Frequently Asked Questions and Answers FAQ’sFrequently Asked Questions and Answers Frequently Asked Questions and Answers Troubleshooting Guide Frequently Asked Questions and Answers Frequently Asked Questions and Answers Cloning, Hard Drive ReferenceGlossary ClusterReference DefragmentLarge Geometry, Hard DriveMaster Drive, Logicube Omniclone Parallel Port Master/Single Drive, IDEPartition Sector RAM DiskSlave Drive, IDE Translation Mode, CHS Target Drive, Logicube OmnicloneWiping, Data Index FdiskIndex Reference Index