Proxim CPN 63708 manual Mounting the MP.11, Desktop Mounting, Wall Mounting

Page 14

Tsunami MP.11 Installation and Management

MOUNTING THE MP.11

The following are the mounting options for the MP.11:

▪

▪

▪

Desktop Mount

Wall Mount

Ceiling Mount

Desktop Mounting

This procedure consists of attaching the metal base to the MP.11 unit. See “Installing the MP.11” on page 9.

Wall Mounting

Follow these steps to mount the MP.11 on a wall.

1.Identify the location where you intend to mount the unit.

Note: For best results, mount the unit vertically (the antenna can be pointing up or down but not sideways; see the following illustration). The illustration on the left shows the unit installed upside down with the antenna pointing down; the illustration on the right shows the unit installed right side up with the antenna pointing up.

2.Unplug the MP.11’s power supply, if necessary.

3.Use a Phillips screwdriver to remove the metal base from the underside of the MP.11, if necessary.

4.Press down on the cable cover lock to release the cable cover (see “Installing the MP.11” on page 9 for illustrations).

5.Remove the cable cover from the unit (see “Installing the MP.11” on page 9 for illustrations).

6.Remove the front cover from the unit (see “Installing the MP.11” on page 9 for illustrations).

7.Remove the back cover from the unit (see “Installing the MP.11” on page 9 for illustrations).

Chapter 2. Installation	14
CPN 63708	Issue Date: 02/05/2003

Image 14

Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Finding a Suitable Location InstallationIdentifying Network Topology and Equipment Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when data sent Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green whenDocumentation ScanTool Installing Documentation and SoftwareOnline help Tftp serverWall Mounting Mounting the MP.11Desktop Mounting Tsunami MP.11 Installation and Management Ceiling Mounting ScanTool Management OverviewMP.11 IP Address Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Resetting Hardware Rebooting and ResettingRebooting Click Commands Î RebootClick Commands Î Reset General SettingsSoft Reset to Factory Default System StatusSystem Configuration Up Time IP ConfigurationDescriptor IP Address Assignment TypeDefault TTL Wireless SlotDefault Router IP Address InterfacesNetwork Name Interface TypeBase Station System Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionUsing the Web Interface to Change Passwords PasswordsUsing Telnet to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Status tab shows the System Status and the System Traps Web InterfaceStatus System StatusSystem ConfigureClick Configure Î System Systems TrapsDhcp Relay Agent IP ConfigurationNetwork IP Routing Wireless Slot a EthernetSnmp Trap Groups IP Access TableTelnet Trap Host TableSerial Time outSecurity MAC AuthenticationRadius Authentication Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWireless MAC Address Wired MAC AddressWired Mask Static MAC Pair FilteringComment Wireless MaskSpanning Tree Per Address Threshold Wireless ThresholdStorm Threshold Ethernet ThresholdGeneral MonitorBroadcast Protocol Filtering Worp Icmp RadiusLink Test FeaturesPer Station IP ARP Table Learn Table IP RoutesServer IP address CommandsDownload File NameReboot UploadReset HelpBoot Loader Command Line Interface Command Line InterfaceUsing Command Help IntroductionViewing and Changing Parameters Show CommandSet Command Entering StringsCreating a Table Row Viewing Table ContentsWorking with Tables Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowProcedure Description ProceduresTftp Server Setup CLI Image File Download Click Commands Æ DownloadImage File Download Click Commands Æ Upload Configuration BackupCLI Configuration File Upload File Type Config File Operation UploadFile Type Config File Operation Download Configuration RestoreCLI Configuration File Download CLI Soft Reset to Factory Defaults Soft Reset to Factory DefaultHard Reset to Factory Default Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz Radio SpecificationsChannel Frequencies Troubleshooting LED IndicatorsSerial Link Does Not Work MP.11 Connectivity IssuesMP.11 Does Not Boot HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workMP.11 Responds Slowly Setup and ConfigurationLost the MP.11 Password Web Interface Does Not WorkOnline Help Is Not Available Command Line Interface Does Not WorkTftp Server Does Not Work Changes Do Not Take Effect Glossary ARPHttp Icmp WEP