Proxim CPN 63708 manual Static or Dynamic IP Address, Static IP Address

Page 18

Tsunami MP.11 Installation and Management

Static or Dynamic IP Address

The MP.11 can use either a static or dynamic IP address.

Static IP address: The MP.11 uses the IP address you have set manually.

Dynamic IP address: The MP.11 receives its IP address from a DHCP server when it is switched on or rebooted.

Static IP Address

The MP.11 is shipped with the static IP address 10.0.0.1 configured.

If you want to set the IP address manually:

1.Run ScanTool on a computer connected to the same LAN subnet as the MP.11, or directly connected to the MP.11 with a cross-over Ethernet cable.

ScanTool scans the subnet for MP.11 units and displays the found units in the main window. The following figure shows an example of the main window. If necessary, click Rescan to re-scan the subnet and update the display.

2.Select the MP.11 for which you want to set the IP address and click Change. The Change dialog window is displayed, as shown in the following window.

Chapter 3. Management Overview

18

CPN 63708

Issue Date: 02/05/2003

Image 18
Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Installation Identifying Network Topology and EquipmentFinding a Suitable Location Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when data sent Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green whenDocumentation ScanTool Installing Documentation and SoftwareOnline help Tftp serverMounting the MP.11 Desktop MountingWall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting Management Overview MP.11 IP AddressScanTool Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Resetting Hardware Rebooting and ResettingRebooting Click Commands Î RebootClick Commands Î Reset General SettingsSoft Reset to Factory Default System StatusSystem Configuration Up Time IP ConfigurationDescriptor IP Address Assignment TypeDefault TTL Wireless SlotDefault Router IP Address InterfacesNetwork Name Interface TypeBase Station System Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionUsing the Web Interface to Change Passwords PasswordsUsing Telnet to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Status tab shows the System Status and the System Traps Web InterfaceStatus System StatusSystem ConfigureClick Configure Î System Systems TrapsIP Configuration NetworkDhcp Relay Agent IP Routing Wireless Slot a EthernetSnmp Trap Groups IP Access TableTelnet Trap Host TableSerial Time outMAC Authentication Radius AuthenticationSecurity Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWireless MAC Address Wired MAC AddressWired Mask Static MAC Pair FilteringWireless Mask Spanning TreeComment Per Address Threshold Wireless ThresholdStorm Threshold Ethernet ThresholdMonitor Broadcast Protocol FilteringGeneral Worp Icmp RadiusFeatures Per StationLink Test IP ARP Table Learn Table IP RoutesServer IP address CommandsDownload File NameReboot UploadReset HelpBoot Loader Command Line Interface Command Line InterfaceUsing Command Help IntroductionViewing and Changing Parameters Show CommandSet Command Entering StringsCreating a Table Row Viewing Table ContentsWorking with Tables Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowProcedures Tftp Server SetupProcedure Description Click Commands Æ Download Image File DownloadCLI Image File Download Click Commands Æ Upload Configuration BackupCLI Configuration File Upload File Type Config File Operation UploadConfiguration Restore CLI Configuration File DownloadFile Type Config File Operation Download Soft Reset to Factory Default Hard Reset to Factory DefaultCLI Soft Reset to Factory Defaults Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsRadio Specifications Channel FrequenciesChannel ID FCC/World Etsi GHz France Japan GHz Troubleshooting LED IndicatorsMP.11 Connectivity Issues MP.11 Does Not BootSerial Link Does Not Work HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workMP.11 Responds Slowly Setup and ConfigurationLost the MP.11 Password Web Interface Does Not WorkCommand Line Interface Does Not Work Tftp Server Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect Glossary ARPHttp Icmp WEP