Proxim CPN 63708 manual Command Line Interface Overview, Ethernet Port

Page 21

Tsunami MP.11 Installation and Management

COMMAND LINE INTERFACE OVERVIEW

The Command Line Interface (CLI) is a text-based interface with which you can configure and manage the MP.11 by entering commands. This section describes only how to access the CLI; the interface itself is described in “Chapter 6. Command Line Interface” on page 60.

The CLI can be used as an alternative to the Web Interface. You can, for example, quickly change the settings of the MP.11 by running commands in a batch.

The CLI is accessible through the:

▪Ethernet port connected through the network or with a cross-over Ethernet cable between the computer and the MP.11

▪Serial port of the MP.11

Ethernet Port

To use the CLI through the Ethernet port, you must have a telnet program and the IP address of the MP.11. On most computers, the telnet program is called telnet. See “MP.11 IP Address” on page 17 for details.

To access the MP.11 through Ethernet:

1.From the Windows Start menu, select Run; enter telnet followed by the IP address, as shown in the following sample Run command window.

2.Click OK to start the telnet program.

3.You are prompted for your password:

Please enter password:

4.Enter the password (the default password is public). You can now use the CLI.

Chapter 3. Management Overview	21
CPN 63708	Issue Date: 02/05/2003

Image 21

Contents Tsunami MP.11 Trademarks CopyrightContents Overview Point-to-Point Link Wireless Network TopologiesPoint-to-Multipoint Network Installation Identifying Network Topology and EquipmentFinding a Suitable Location Product Package InstallationInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Power Ethernet Link Wireless Link Switching on the MP.11Blinking Green when data sent Blinking Green whenOnline help Installing Documentation and SoftwareDocumentation ScanTool Tftp serverMounting the MP.11 Desktop MountingWall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting Management Overview MP.11 IP AddressScanTool Static IP Address Static or Dynamic IP AddressDynamic IP Address with Dhcp WEB Interface Overview Ethernet Port Command Line Interface OverviewSerial Port HyperTerminal Connection Properties Basic Management Rebooting Rebooting and ResettingResetting Hardware Click Commands Î RebootSoft Reset to Factory Default General SettingsClick Commands Î Reset System StatusSystem Configuration Descriptor IP ConfigurationUp Time IP Address Assignment TypeDefault Router IP Address Wireless SlotDefault TTL InterfacesBase Station System Name Interface TypeNetwork Name Frequency ChannelEthernet Port Wireless Monitoring SettingsShow wif show worp show worpcfg Encryption Security SettingsUsing Telnet to Change Passwords PasswordsUsing the Web Interface to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Status Web InterfaceStatus tab shows the System Status and the System Traps System StatusClick Configure Î System ConfigureSystem Systems TrapsIP Configuration NetworkDhcp Relay Agent IP Routing Ethernet Wireless Slot aSnmp Telnet IP Access TableTrap Groups Trap Host TableTime out SerialMAC Authentication Radius AuthenticationSecurity Encryption FilteringEthernet Protocol Filtering Ethernet Protocol FilterWired Mask Wired MAC AddressWireless MAC Address Static MAC Pair FilteringWireless Mask Spanning TreeComment Storm Threshold Wireless ThresholdPer Address Threshold Ethernet ThresholdMonitor Broadcast Protocol FilteringGeneral Worp Radius IcmpFeatures Per StationLink Test IP ARP Table IP Routes Learn TableDownload CommandsServer IP address File NameUpload RebootHelp ResetUsing Command Help Command Line InterfaceBoot Loader Command Line Interface IntroductionSet Command Show CommandViewing and Changing Parameters Entering StringsWorking with Tables Viewing Table ContentsCreating a Table Row Modifying a Table EntryEnabling, Disabling, or Deleting a Table Row Modifying Several Table EntriesProcedures Tftp Server SetupProcedure Description Click Commands Æ Download Image File DownloadCLI Image File Download CLI Configuration File Upload Configuration BackupClick Commands Æ Upload File Type Config File Operation UploadConfiguration Restore CLI Configuration File DownloadFile Type Config File Operation Download Soft Reset to Factory Default Hard Reset to Factory DefaultCLI Soft Reset to Factory Defaults Forced Reload Image File Download with the BootloaderCommand prompt is displayed enter the following commands Command Line InterfaceFor example Hardware Specifications SpecificationsRadio Specifications Channel FrequenciesChannel ID FCC/World Etsi GHz France Japan GHz LED Indicators TroubleshootingMP.11 Connectivity Issues MP.11 Does Not BootSerial Link Does Not Work HyperTerminal Connection Properties Ethernet Link does not work Setup and ConfigurationLost the MP.11 Password Setup and ConfigurationMP.11 Responds Slowly Web Interface Does Not WorkCommand Line Interface Does Not Work Tftp Server Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect ARP GlossaryHttp Icmp WEP