Proxim CPN 63708 manual Ceiling Mounting

Page 16

Tsunami MP.11 Installation and Management

Ceiling Mounting

Follow these steps to mount the MP.11 to a ceiling.

1.Unplug the MP.11’s power supply, if necessary.

2.Use a Phillips screwdriver to attach the metal base to the underside of the MP.11, if necessary. See “Installing the MP.11” on page 9 for an illustration.

3.Feed a mounting screw through each of the four rubber feet. The MP.11 comes with four 3.5 mm x 40 mm pan-head screws.

4.Remove the screws from the rubber feet.

5.Turn the MP.11 upside down and position the base against the ceiling where you want to mount the unit.

6.Mark the center of the four mounting holes in the rubber feet.

7.Set the MP.11 aside and drill a hole at each of the locations you marked above. Each hole should be wide enough to hold a mounting plug (6 mm x 35 mm).

8.Insert a plug into each hole. The MP.11 comes with four 6 mm x 35 mm plugs.

9.Insert the screws into the holes you made previously in the rubber feet.

10.Insert the screws into the wall plugs. Use a screwdriver to tighten the screws and attach the MP.11’s metal base in the ceiling

Chapter 2. Installation	16
CPN 63708	Issue Date: 02/05/2003

Image 16

Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Identifying Network Topology and Equipment InstallationFinding a Suitable Location Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Switching on the MP.11 Power Ethernet Link Wireless LinkBlinking Green when data sent Blinking Green whenInstalling Documentation and Software Online helpDocumentation ScanTool Tftp serverDesktop Mounting Mounting the MP.11Wall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting MP.11 IP Address Management OverviewScanTool Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Rebooting and Resetting RebootingResetting Hardware Click Commands Î RebootGeneral Settings Soft Reset to Factory DefaultClick Commands Î Reset System StatusSystem Configuration IP Configuration DescriptorUp Time IP Address Assignment TypeWireless Slot Default Router IP AddressDefault TTL InterfacesInterface Type Base Station System NameNetwork Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionPasswords Using Telnet to Change PasswordsUsing the Web Interface to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Web Interface StatusStatus tab shows the System Status and the System Traps System StatusConfigure Click Configure Î SystemSystem Systems TrapsNetwork IP ConfigurationDhcp Relay Agent IP Routing Wireless Slot a EthernetSnmp IP Access Table TelnetTrap Groups Trap Host TableSerial Time outRadius Authentication MAC AuthenticationSecurity Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWired MAC Address Wired MaskWireless MAC Address Static MAC Pair FilteringSpanning Tree Wireless MaskComment Wireless Threshold Storm ThresholdPer Address Threshold Ethernet ThresholdBroadcast Protocol Filtering MonitorGeneral Worp Icmp RadiusPer Station FeaturesLink Test IP ARP Table Learn Table IP RoutesCommands DownloadServer IP address File NameReboot UploadReset HelpCommand Line Interface Using Command HelpBoot Loader Command Line Interface IntroductionShow Command Set CommandViewing and Changing Parameters Entering StringsViewing Table Contents Working with TablesCreating a Table Row Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowTftp Server Setup ProceduresProcedure Description Image File Download Click Commands Æ DownloadCLI Image File Download Configuration Backup CLI Configuration File UploadClick Commands Æ Upload File Type Config File Operation UploadCLI Configuration File Download Configuration RestoreFile Type Config File Operation Download Hard Reset to Factory Default Soft Reset to Factory DefaultCLI Soft Reset to Factory Defaults Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsChannel Frequencies Radio SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz Troubleshooting LED IndicatorsMP.11 Does Not Boot MP.11 Connectivity IssuesSerial Link Does Not Work HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workSetup and Configuration Lost the MP.11 PasswordMP.11 Responds Slowly Web Interface Does Not WorkTftp Server Does Not Work Command Line Interface Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect Glossary ARPHttp Icmp WEP