Proxim CPN 63708 manual Command Line Interface Does Not Work, Tftp Server Does Not Work

Page 79

Tsunami MP.11 Installation and Management

Command Line Interface Does Not Work

If you cannot connect to the MP.11 through the network:

1.Connect a computer to the serial port of the MP.11 and check the SNMP table. The SNMP table can restrict telnet or HTTP access. For more information, see “Serial Port” on page 22.

2.Open a command prompt window and enter: ping <ip address MP.11> (for example ping 10.0.0.1).

ºIf the MP.11 does not respond, ensure that you have the correct IP address.

ºIf the MP.11 responds, the Ethernet connection is working properly, continue with this procedure.

3.Ensure that you have not exceeded the maximum number of CLI sessions.

TFTP Server Does Not Work

With TFTP, you can transfer files to and from the MP.11. Also see “TFTP Server Setup” on page 64. If a TFTP server is not properly configured and running, you cannot upload and download files. The TFTP server:

▪

▪

▪

▪

Can be situated either local or remote. Must have a valid IP address.

Must be set for send and receive without time-out. Only must be running during file upload and download.

If TFTP server does not upload or download files, it could mean:

▪

▪

▪

▪

The TFTP server is not running.

The IP address of the TFTP server is invalid.

The upload or download directory is not correctly set. The file name is not correct.

Online Help Is Not Available

Online help does not appear when the ‘Question mark’ button is clicked in the Web Interface:

1.Make sure that the Help files are installed on your computer or server. Also see “Installing Documentation and Software”.

2.Verify if the path of the help files in the Web Interface refers to the correct directory. See “Help” on page 59.

Chapter 9. Troubleshooting	79
CPN 63708	Issue Date: 02/05/2003

Image 79

Contents Tsunami MP.11 Trademarks CopyrightContents Overview Point-to-Point Link Wireless Network TopologiesPoint-to-Multipoint Network Identifying Network Topology and Equipment InstallationFinding a Suitable Location Product Package InstallationInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green when data sentTftp server Installing Documentation and SoftwareOnline help Documentation ScanToolDesktop Mounting Mounting the MP.11Wall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting MP.11 IP Address Management OverviewScanTool Static IP Address Static or Dynamic IP AddressDynamic IP Address with Dhcp WEB Interface Overview Ethernet Port Command Line Interface OverviewSerial Port HyperTerminal Connection Properties Basic Management Click Commands Î Reboot Rebooting and ResettingRebooting Resetting HardwareSystem Status General SettingsSoft Reset to Factory Default Click Commands Î ResetSystem Configuration IP Address Assignment Type IP ConfigurationDescriptor Up TimeInterfaces Wireless SlotDefault Router IP Address Default TTLFrequency Channel Interface TypeBase Station System Name Network NameEthernet Port Wireless Monitoring SettingsShow wif show worp show worpcfg Encryption Security SettingsUsing Snmp to Change Passwords PasswordsUsing Telnet to Change Passwords Using the Web Interface to Change PasswordsUpgrading the MP.11 System Status Web InterfaceStatus Status tab shows the System Status and the System TrapsSystems Traps ConfigureClick Configure Î System SystemNetwork IP ConfigurationDhcp Relay Agent IP Routing Ethernet Wireless Slot aSnmp Trap Host Table IP Access TableTelnet Trap GroupsTime out SerialRadius Authentication MAC AuthenticationSecurity Encryption FilteringEthernet Protocol Filtering Ethernet Protocol FilterStatic MAC Pair Filtering Wired MAC AddressWired Mask Wireless MAC AddressSpanning Tree Wireless MaskComment Ethernet Threshold Wireless ThresholdStorm Threshold Per Address ThresholdBroadcast Protocol Filtering MonitorGeneral Worp Radius IcmpPer Station FeaturesLink Test IP ARP Table IP Routes Learn TableFile Name CommandsDownload Server IP addressUpload RebootHelp ResetIntroduction Command Line InterfaceUsing Command Help Boot Loader Command Line InterfaceEntering Strings Show CommandSet Command Viewing and Changing ParametersModifying a Table Entry Viewing Table ContentsWorking with Tables Creating a Table RowEnabling, Disabling, or Deleting a Table Row Modifying Several Table EntriesTftp Server Setup ProceduresProcedure Description Image File Download Click Commands Æ DownloadCLI Image File Download File Type Config File Operation Upload Configuration BackupCLI Configuration File Upload Click Commands Æ UploadCLI Configuration File Download Configuration RestoreFile Type Config File Operation Download Hard Reset to Factory Default Soft Reset to Factory DefaultCLI Soft Reset to Factory Defaults Forced Reload Image File Download with the BootloaderCommand prompt is displayed enter the following commands Command Line InterfaceFor example Hardware Specifications SpecificationsChannel Frequencies Radio SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz LED Indicators TroubleshootingMP.11 Does Not Boot MP.11 Connectivity IssuesSerial Link Does Not Work HyperTerminal Connection Properties Ethernet Link does not work Setup and ConfigurationWeb Interface Does Not Work Setup and ConfigurationLost the MP.11 Password MP.11 Responds SlowlyTftp Server Does Not Work Command Line Interface Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect ARP GlossaryHttp Icmp WEP