Proxim CPN 63708 manual Command Line Interface, Introduction, Using Command Help

Page 60

Tsunami MP.11 Installation and Management

Chapter 6. Command Line Interface

INTRODUCTION

The Command Line Interface (CLI) provides a text-based interface with which you can configure and manage the MP.11 using commands. You can enter these commands or submit them in the form of a script to allow batch processing. Accessing the CLI was previously discussed in “Command Line Interface Overview” on page 21.

This chapter provides details about:

▪

▪

Using Command Help below

Viewing and Changing Parameters on page 61

Boot Loader Command Line Interface

The Boot Loader is started when the MP.11 is switched on or reset, and is responsible for starting the embedded software. The Boot Loader CLI (which has only a limited set of commands) is available when the MP.11 embedded software is not running.

USING COMMAND HELP

You can show CLI help by entering help at the command prompt. The CLI also provides context- specific help. To provide help in a specific situation, enter ?. You can get help as follows:

?Lists all available commands.

s?Lists all commands beginning with an s.

setShows the definition and a syntax example of the set command.

set ? Shows the parameter name of the set command that must be entered at the position of the question mark. In this case you must enter a space before the ?. For example:

download ?

<TFTP IP Address>

download 10.0.0.2 ? <File Name>

download 10.0.0.2 image.bin ?

<file_type (config/image/Boot Loader/license)> download 10.0.0.2 image.bin image

set ip? Lists all parameters of the set command beginning with ip.

Note that the Boot Loader CLI does not have command help.

Chapter 6. Command Line Interface	60
CPN 63708	Issue Date: 02/05/2003

Image 60

Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Installation Identifying Network Topology and EquipmentFinding a Suitable Location Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Switching on the MP.11 Power Ethernet Link Wireless LinkBlinking Green when data sent Blinking Green whenInstalling Documentation and Software Online helpDocumentation ScanTool Tftp serverMounting the MP.11 Desktop MountingWall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting Management Overview MP.11 IP AddressScanTool Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Rebooting and Resetting RebootingResetting Hardware Click Commands Î RebootGeneral Settings Soft Reset to Factory DefaultClick Commands Î Reset System StatusSystem Configuration IP Configuration DescriptorUp Time IP Address Assignment TypeWireless Slot Default Router IP AddressDefault TTL InterfacesInterface Type Base Station System NameNetwork Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionPasswords Using Telnet to Change PasswordsUsing the Web Interface to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Web Interface StatusStatus tab shows the System Status and the System Traps System StatusConfigure Click Configure Î SystemSystem Systems TrapsIP Configuration NetworkDhcp Relay Agent IP Routing Wireless Slot a EthernetSnmp IP Access Table TelnetTrap Groups Trap Host TableSerial Time outMAC Authentication Radius AuthenticationSecurity Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWired MAC Address Wired MaskWireless MAC Address Static MAC Pair FilteringWireless Mask Spanning TreeComment Wireless Threshold Storm ThresholdPer Address Threshold Ethernet ThresholdMonitor Broadcast Protocol FilteringGeneral Worp Icmp RadiusFeatures Per StationLink Test IP ARP Table Learn Table IP RoutesCommands DownloadServer IP address File NameReboot UploadReset HelpCommand Line Interface Using Command HelpBoot Loader Command Line Interface IntroductionShow Command Set CommandViewing and Changing Parameters Entering StringsViewing Table Contents Working with TablesCreating a Table Row Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowProcedures Tftp Server SetupProcedure Description Click Commands Æ Download Image File DownloadCLI Image File Download Configuration Backup CLI Configuration File UploadClick Commands Æ Upload File Type Config File Operation UploadConfiguration Restore CLI Configuration File DownloadFile Type Config File Operation Download Soft Reset to Factory Default Hard Reset to Factory DefaultCLI Soft Reset to Factory Defaults Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsRadio Specifications Channel FrequenciesChannel ID FCC/World Etsi GHz France Japan GHz Troubleshooting LED IndicatorsMP.11 Connectivity Issues MP.11 Does Not BootSerial Link Does Not Work HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workSetup and Configuration Lost the MP.11 PasswordMP.11 Responds Slowly Web Interface Does Not WorkCommand Line Interface Does Not Work Tftp Server Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect Glossary ARPHttp Icmp WEP