Proxim CPN 63708 manual Telnet, Trap Groups, IP Access Table, Trap Host Table

Page 43

Tsunami MP.11 Installation and Management

Trap Groups

The user can enable or disable different types of traps in the system. By default, all traps are enabled.

IP Access Table

Entries in this table show which wireless stations are allowed to use SNMP, HTTP, and telnet management interfaces.

To add an entry, click Add; then specify the IP address and mask of the wireless stations to which you want to grant access. For example, 172.17.23.0/255.255.255.0 allows access from all wireless stations with an IP address in the 172.17.23.xxx range. Ensure that the wireless station you use is the first entry in the table.

Trap Host Table

This table shows the SNMP management stations to which the MP.11 sends system traps.

5) Telnet

Click Configure Î Telnet to manage telnet parameters, including password and time out.

Note: To use HyperTerminal for CLI access, make sure to check “Send line ends with line feeds” in the ASCII Setup window.

Chapter 5. Web Interface	43
CPN 63708	Issue Date: 02/05/2003

Image 43

Contents Tsunami MP.11 Trademarks CopyrightContents Overview Point-to-Point Link Wireless Network TopologiesPoint-to-Multipoint Network Identifying Network Topology and Equipment InstallationFinding a Suitable Location Product Package InstallationInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green when data sentTftp server Installing Documentation and SoftwareOnline help Documentation ScanToolDesktop Mounting Mounting the MP.11Wall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting MP.11 IP Address Management OverviewScanTool Static IP Address Static or Dynamic IP AddressDynamic IP Address with Dhcp WEB Interface Overview Ethernet Port Command Line Interface OverviewSerial Port HyperTerminal Connection Properties Basic Management Click Commands Î Reboot Rebooting and ResettingRebooting Resetting HardwareSystem Status General SettingsSoft Reset to Factory Default Click Commands Î ResetSystem Configuration IP Address Assignment Type IP ConfigurationDescriptor Up TimeInterfaces Wireless SlotDefault Router IP Address Default TTLFrequency Channel Interface TypeBase Station System Name Network NameEthernet Port Wireless Monitoring SettingsShow wif show worp show worpcfg Encryption Security SettingsUsing Snmp to Change Passwords PasswordsUsing Telnet to Change Passwords Using the Web Interface to Change PasswordsUpgrading the MP.11 System Status Web InterfaceStatus Status tab shows the System Status and the System TrapsSystems Traps ConfigureClick Configure Î System SystemNetwork IP ConfigurationDhcp Relay Agent IP Routing Ethernet Wireless Slot aSnmp Trap Host Table IP Access TableTelnet Trap GroupsTime out SerialRadius Authentication MAC AuthenticationSecurity Encryption FilteringEthernet Protocol Filtering Ethernet Protocol FilterStatic MAC Pair Filtering Wired MAC AddressWired Mask Wireless MAC AddressSpanning Tree Wireless MaskComment Ethernet Threshold Wireless ThresholdStorm Threshold Per Address ThresholdBroadcast Protocol Filtering MonitorGeneral Worp Radius IcmpPer Station FeaturesLink Test IP ARP Table IP Routes Learn TableFile Name CommandsDownload Server IP addressUpload RebootHelp ResetIntroduction Command Line InterfaceUsing Command Help Boot Loader Command Line InterfaceEntering Strings Show CommandSet Command Viewing and Changing ParametersModifying a Table Entry Viewing Table ContentsWorking with Tables Creating a Table RowEnabling, Disabling, or Deleting a Table Row Modifying Several Table EntriesTftp Server Setup ProceduresProcedure Description Image File Download Click Commands Æ DownloadCLI Image File Download File Type Config File Operation Upload Configuration BackupCLI Configuration File Upload Click Commands Æ UploadCLI Configuration File Download Configuration RestoreFile Type Config File Operation Download Hard Reset to Factory Default Soft Reset to Factory DefaultCLI Soft Reset to Factory Defaults Forced Reload Image File Download with the BootloaderCommand prompt is displayed enter the following commands Command Line InterfaceFor example Hardware Specifications SpecificationsChannel Frequencies Radio SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz LED Indicators TroubleshootingMP.11 Does Not Boot MP.11 Connectivity IssuesSerial Link Does Not Work HyperTerminal Connection Properties Ethernet Link does not work Setup and ConfigurationWeb Interface Does Not Work Setup and ConfigurationLost the MP.11 Password MP.11 Responds SlowlyTftp Server Does Not Work Command Line Interface Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect ARP GlossaryHttp Icmp WEP