Proxim CPN 63708 Configuration Backup, CLI Configuration File Upload, Click Commands Æ Upload

Page 66

Tsunami MP.11 Installation and Management

CONFIGURATION BACKUP

You can back up the MP.11 configuration by uploading the configuration file. You can use this file to restore the configuration or to configure another MP.11 (see “Configuration Restore” on page 67).

To upload a configuration file through the Web Interface:

1.Set up the TFTP server as described in “TFTP Server Setup” on page 64.

2.Access the MP.11 as described in “Web Interface Overview” on page 20.

3.Click Commands Æ Upload.

4.Fill in the following details:

Server IP Address <IP address TFTP server> File Name <configuration file name>

File Type Config

File Operation Upload

5.Click OK to start the file transfer.

The MP.11 uploads the configuration file. The TFTP server program should show upload activity after a few seconds. When the upload is complete, the configuration is backed up.

CLI Configuration File Upload

To upload a configuration file:

1.Set up the TFTP server as described in “TFTP Server Setup” on page 64.

2.Access the MP.11 as described in “Command Line Interface Overview” on page 20.

3.Enter the following command:

upload <IP address TFTP server> <configuration file name> config

The MP.11 uploads the configuration file. The TFTP server program should show upload activity after a few seconds. When the upload is complete and the system rebooted, the configuration is backed up.

Chapter 7. Procedures	66
CPN 63708	Issue Date: 02/05/2003

Image 66

Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Installation Identifying Network Topology and EquipmentFinding a Suitable Location Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when data sent Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green whenDocumentation ScanTool Installing Documentation and SoftwareOnline help Tftp serverMounting the MP.11 Desktop MountingWall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting Management Overview MP.11 IP AddressScanTool Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Resetting Hardware Rebooting and ResettingRebooting Click Commands Î RebootClick Commands Î Reset General SettingsSoft Reset to Factory Default System StatusSystem Configuration Up Time IP ConfigurationDescriptor IP Address Assignment TypeDefault TTL Wireless SlotDefault Router IP Address InterfacesNetwork Name Interface TypeBase Station System Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionUsing the Web Interface to Change Passwords PasswordsUsing Telnet to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Status tab shows the System Status and the System Traps Web InterfaceStatus System StatusSystem ConfigureClick Configure Î System Systems TrapsIP Configuration NetworkDhcp Relay Agent IP Routing Wireless Slot a EthernetSnmp Trap Groups IP Access TableTelnet Trap Host TableSerial Time outMAC Authentication Radius AuthenticationSecurity Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWireless MAC Address Wired MAC AddressWired Mask Static MAC Pair FilteringWireless Mask Spanning TreeComment Per Address Threshold Wireless ThresholdStorm Threshold Ethernet ThresholdMonitor Broadcast Protocol FilteringGeneral Worp Icmp RadiusFeatures Per StationLink Test IP ARP Table Learn Table IP RoutesServer IP address CommandsDownload File NameReboot UploadReset HelpBoot Loader Command Line Interface Command Line InterfaceUsing Command Help IntroductionViewing and Changing Parameters Show CommandSet Command Entering StringsCreating a Table Row Viewing Table ContentsWorking with Tables Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowProcedures Tftp Server SetupProcedure Description Click Commands Æ Download Image File DownloadCLI Image File Download Click Commands Æ Upload Configuration BackupCLI Configuration File Upload File Type Config File Operation UploadConfiguration Restore CLI Configuration File DownloadFile Type Config File Operation Download Soft Reset to Factory Default Hard Reset to Factory DefaultCLI Soft Reset to Factory Defaults Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsRadio Specifications Channel FrequenciesChannel ID FCC/World Etsi GHz France Japan GHz Troubleshooting LED IndicatorsMP.11 Connectivity Issues MP.11 Does Not BootSerial Link Does Not Work HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workMP.11 Responds Slowly Setup and ConfigurationLost the MP.11 Password Web Interface Does Not WorkCommand Line Interface Does Not Work Tftp Server Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect Glossary ARPHttp Icmp WEP