Tsunami MP.11 Installation and Management
Chapter 1. Overview
The Tsunami MP.11 is a flexible wireless Outdoor Router that lets you design solutions for
The MP.11 is a product family, comprising several products (such as the mp.11 2411 Base Station and the MP.11 2411 Residential Subscriber unit). For simplification, all products that are part of the MP.11 Product Family are referred to as MP.11.
Some of the key features of the MP.11 are:
▪
▪
▪
▪
The use of a highly optimized protocol for outdoor situations
Routing and bridging capability
Asymmetric bandwidth management
Management through a Web Interface, a Command Line Interface (CLI), or Simple Network Management Protocol (SNMP)
Before installing and using the MP.11, Proxim recommends you review the following chapters of this manual first:
Chapter 1 “Overview” (this chapter)
This chapter gives an overview of the content of this manual as well as wireless network topologies and combinations that can be built with the MP.11.
Chapter 2 “Installation” on page 7
This chapter gives detailed installation instructions for the MP.11.
Chapter 3 “Management Overview” on page 17
This chapter explains how to access the MP.11 to manage it for configuration or maintenance.
Chapter 4 “Basic Management” on page 24
This chapter explains the most common settings used to manage the MP.11.
Chapter 5 “Web Interface” on page 37
This chapter depicts the Web Interface in a hierarchical manner, so you can easily find details about each item.
Chapter 6 “Command Line Interface” on page 60
The Command Line Interface (CLI) is an alternative to the Web Interface. This chapter tells you how to obtain help about commands and how to handle strings, tables, and so on.
The remaining chapters contain supplementary information you may not need immediately.
If you are already familiar with this type of product, you can use the “Quick Install Guide” to install the MP.11.
Chapter 1. Overview | 4 |
CPN 63708 | Issue Date: 02/05/2003 |