Proxim CPN 63708 manual Troubleshooting, LED Indicators

Page 74

Tsunami MP.11 Installation and Management

Chapter 9. Troubleshooting

This chapter helps you to isolate and solve= problems with your MP.11. In the event this chapter does not provide a solution or the solution does not solve your problem, please check our website:

http://www.proxim.com

Before you start troubleshooting, it is important that you have checked the details in the user’s guides and manuals. For details about RADIUS, TFTP, terminal and telnet programs, and Web browsers, please refer to their appropriate documentation.

The following sections can help to solve your problem:

▪LED Indicators below

▪MP.11 Connectivity Issues on page 75

▪Setup and Configuration on page 78

In some cases, rebooting the MP.11 clears the problem. If nothing else helps, consider a “Soft Reset to Factory Defaults” (on page 26) or a “Forced Reload” (on page 69). The Forced Reload option requires you to download a new image file to the MP.11.

LED INDICATORS

The MP.11 has three active LED indicators; the fourth LED is not used at this time. The LEDs are shown in the following figure and described in the table.

Chapter 9. Troubleshooting	74
CPN 63708	Issue Date: 02/05/2003

Image 74

Contents Tsunami MP.11 Copyright TrademarksContents Overview Wireless Network Topologies Point-to-Point LinkPoint-to-Multipoint Network Finding a Suitable Location InstallationIdentifying Network Topology and Equipment Installation Product PackageInstalling the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when data sent Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green whenDocumentation ScanTool Installing Documentation and SoftwareOnline help Tftp serverWall Mounting Mounting the MP.11Desktop Mounting Tsunami MP.11 Installation and Management Ceiling Mounting ScanTool Management OverviewMP.11 IP Address Static or Dynamic IP Address Static IP AddressDynamic IP Address with Dhcp WEB Interface Overview Command Line Interface Overview Ethernet PortSerial Port HyperTerminal Connection Properties Basic Management Resetting Hardware Rebooting and ResettingRebooting Click Commands Î RebootClick Commands Î Reset General SettingsSoft Reset to Factory Default System StatusSystem Configuration Up Time IP ConfigurationDescriptor IP Address Assignment TypeDefault TTL Wireless SlotDefault Router IP Address InterfacesNetwork Name Interface TypeBase Station System Name Frequency ChannelEthernet Port Monitoring Settings WirelessShow wif show worp show worpcfg Security Settings EncryptionUsing the Web Interface to Change Passwords PasswordsUsing Telnet to Change Passwords Using Snmp to Change PasswordsUpgrading the MP.11 Status tab shows the System Status and the System Traps Web InterfaceStatus System StatusSystem ConfigureClick Configure Î System Systems TrapsDhcp Relay Agent IP ConfigurationNetwork IP Routing Wireless Slot a EthernetSnmp Trap Groups IP Access TableTelnet Trap Host TableSerial Time outSecurity MAC AuthenticationRadius Authentication Filtering EncryptionEthernet Protocol Filter Ethernet Protocol FilteringWireless MAC Address Wired MAC AddressWired Mask Static MAC Pair FilteringComment Wireless MaskSpanning Tree Per Address Threshold Wireless ThresholdStorm Threshold Ethernet ThresholdGeneral MonitorBroadcast Protocol Filtering Worp Icmp RadiusLink Test FeaturesPer Station IP ARP Table Learn Table IP RoutesServer IP address CommandsDownload File NameReboot UploadReset HelpBoot Loader Command Line Interface Command Line InterfaceUsing Command Help IntroductionViewing and Changing Parameters Show CommandSet Command Entering StringsCreating a Table Row Viewing Table ContentsWorking with Tables Modifying a Table EntryModifying Several Table Entries Enabling, Disabling, or Deleting a Table RowProcedure Description ProceduresTftp Server Setup CLI Image File Download Click Commands Æ DownloadImage File Download Click Commands Æ Upload Configuration BackupCLI Configuration File Upload File Type Config File Operation UploadFile Type Config File Operation Download Configuration RestoreCLI Configuration File Download CLI Soft Reset to Factory Defaults Soft Reset to Factory DefaultHard Reset to Factory Default Image File Download with the Bootloader Forced ReloadCommand Line Interface Command prompt is displayed enter the following commandsFor example Specifications Hardware SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz Radio SpecificationsChannel Frequencies Troubleshooting LED IndicatorsSerial Link Does Not Work MP.11 Connectivity IssuesMP.11 Does Not Boot HyperTerminal Connection Properties Setup and Configuration Ethernet Link does not workMP.11 Responds Slowly Setup and ConfigurationLost the MP.11 Password Web Interface Does Not WorkOnline Help Is Not Available Command Line Interface Does Not WorkTftp Server Does Not Work Changes Do Not Take Effect Glossary ARPHttp Icmp WEP