Tsunami MP.11 Installation and Management
SYSTEM CONFIGURATION
The system configuration page lets you change the MP.11’s system name, location name, and so on (see the following System Configuration window). These details help you to distinguish this MP.11 from other routers, and lets you know whom to contact in case of problems. To go to this page, click the Configure button and the System tab.
You can enter the following details:
Name
This is the system name for easy identification of the MP.11.
Location
This field can be used to describe the location of the MP.11, for example “Main Lobby.”
Contact Name, Contact Email, and Contact Phone
In these fields, you can enter the details of the person to contact.
Mode of Operation
Lets you choose one of two operating modes for your device: Bridge mode or Routing mode.
The following fields are described as follows:
ObjectID
This field shows the OID of the product name in the MIB.
Ethernet MAC Address
The MAC address of the Ethernet interface of the device.
Chapter 4. Basic Management | 27 |
CPN 63708 | Issue Date: 02/05/2003 |