
Installing the Bezel
1.Snap the two tabs on the lower inside edge of the bezel into the corresponding clips on the system front panel, and pivot the bezel upward to its closed position.
2.Using the system key, lock the bezel.
System Cover
To upgrade or troubleshoot the system, remove the cover to gain access to internal components.
Removing the Cover
CAUTION: Before you perform this procedure, see "Safety
1.Remove the bezel (see "Removing the Bezel").
2.Loosen the three thumbscrews on the
3.Grasp the cover at both ends and slide it toward the front of the system.
4.Lift the cover away from the system.
Figure 5-3. Removing the Cover
NOTICE: Figure
Installing the Cover
1.Ensure that no tools or loose parts are left inside the system.
2.Fit the cover on the side of the system, and slide the cover backward.
3.Tighten the three cover thumbscrews (see Figure
4.Replace the bezel.