Canon FAX-TT250 manual Guidelines for entering numbers, letters, and symbols, Correcting mistakes

Guidelines for entering numbers, letters, and symbols

After 60 seconds of no operation panel input, the fax returns to standby mode and any unregistered changes are lost.

■Entering letters and numbers

1	Press	to switch mode.
		_	:A

2 Press the numeric button that contains the letter you want.

Press repeatedly until the letter you want appears.	C	:A
3 Continue entering other letters using the numeric buttons.

•If the next letter you want to enter is under the same numeric button you pressed in step 2, press [ ] to move the cursor to the right. Then press that same numeric button repeatedly until the letter you want appears.

•To enter a space, press [Space].

■Entering symbols

1

2

Press [#] repeatedly until the symbol you want appears.

#:1

If you want to enter another symbol, press [ ] to move the cursor to the right, then press [#] repeatedly until the symbol you want appears.

Correcting mistakes

You can clear an entire entry by pressing [Clear]. Alternatively, follow the procedure below to correct individual letters:

1Use [ ] or [ ] to move the cursor under the incorrect letter.

2Use the numeric buttons to enter the correct letter over the incorrect letter.

CANEN:A

CANON:A

3 When you have finished making corrections, press [Start/Copy] to register your new entry.

18