Canon FAX-TT250 manual Documents and Paper, Preparing documents, Types of documents you can scan

Page 24

3 DOCUMENTS AND PAPER

Preparing documents

Types of documents you can scan

Size

You can load documents larger than 148 mm wide and 148 mm long.

The maximum size of document that can be loaded is 216 mm wide by approximately 900 mm long.

Scanned area

The actual area scanned by the fax is shown below.

Min. 148 mm

Min.

148 mm

Max.

Approx. 900 mm

A4

Approx. 2 mm

Approx. 5 mm

Max. 216 mm

Approx. 1.0mm 208 mm

Approx. 1.0 mm

 

Thickness

Thickness of documents which can be set to document feeder are as follows:

Quantity of documents

Thickness of documents

1

0.07 ~ 0.23 mm

 

 

more than 2

0.07 ~ 0.13 mm

 

 

Problem documents

• To prevent document jams in the document feeder, do not attempt to load the following types of document into the

fax:

 

 

Wrinkled or creased paper

Curled or rolled paper

Torn paper

Carbon paper or carbon-backed paper

Coated paper or glossy paper

Onion skin or thin paper

Thick paper

Envelopes

Remove all staples, paper clips, etc. before loading the document into the document feeder.

Make sure any glue, ink or correction fluid on the paper is completely dry before loading the document into the document feeder.

Make a photocopy of any document that will not feed into the fax so that you can then load the copy into the document feeder.

24

Image 24
Contents FAX-TT250 Table of Contents Specifications Receiving DocumentsCopyright Using this guide Customer supportSetting UP UnpackingRemoving the shipping materials Connecting the telephone line, handset, and external device Be sure to select the correct receive mode see ChapterMaking connections CradleConnecting the AC power cord Setting the language and countrySetting the date and time Press Start/Copy after the display shows Display LanguageInstalling the ink film Close the operation panel gently until it clicks into place Loading paper Assembling the multi-purpose trayLoading paper Open the multi-purpose tray b by pulling it forwardTesting the machine Open the cover where the document entersAdjust the document guides Loading documentsSetting the TEL Line Type Dialling through a switchboard PBXUse or to select PBX, then press Start/Copy Preparing to USE Your FAX Main components of your faxPreparing to USE Your FAX Guidelines for entering numbers, letters, and symbols Entering symbolsCorrecting mistakes Entering letters and numbersRegistering sender information Personalising your faxIdentifying your documents Press Function, then press Start/Copy three timesSetting the summer time Registering your fax/telephone number and nameTIME, then press Start/Copy twice Use Use To select WEEK, then press Start/CopyUse or to select TIME, then press Start/Copy Registering one-touch speed dialling numbers and names Press Function UseRegistering coded speed dialling numbers and names Use or to select Coded Speed DIAL, then press Start/CopyProblem documents Documents and PaperPreparing documents Types of documents you can scanPaper requirements Printable areaPaper guidelines Making Copies Copying documentsPress Start/Copy Adjusting the quality of your documents Setting the scanning resolutionSetting the scanning contrast Sending DocumentsSending documents Direct sendingMemory sending Manual sendingCancelling sending Automatic diallingSpecial dialling Long-distance diallingRedialling when the line is busy Manual rediallingAutomatic redialling Delayed sending Cancelling delayed sending Press to delete the documentSequential broadcasting Sending a document to more than one locationDocuments stored in memory Deleting a document from memoryReceiving Documents Different ways to receive a documentDetails Setting the receive mode It receives a call, then press Start/Copy twiceSomeone to pick up the handset, then press Start/Copy twice Receiving documents manually Manual Mode Check that Manual is displayed on the LCD see pIf you hear a slow beep tone Other features Cancelling receivingChanging calling volume Polling to receive documentsSettings and Activity Reports Selecting a menuSettings and Activity Reports RX Settings System Settings How to print a report Activity reportsUser’s data list Activity reportSolutions to Common Problems Clearing jamsRemoving a jammed document from the machine Removing jammed printing paper from the machine Periodic cleaning Cleaning the exterior of the faxCleaning the interior of the fax Replacing the ink film Remove the used ink film cartridge and holdersFollow steps 2 to 6 on the Installing the ink film on p Detach the holders from the used ink filmTroubleshooting Cannot send using Error Correction Mode ECM Errors occur frequently while sendingReceiving problems Cannot receive a document automatically Cannot receive using Error Correction Mode ECM Errors occur frequently while receivingPrint quality is poor Fax does not printMemory Full appears on the LCD when making multiple copies Fax does not make a copyYou cannot dial There is interference on the lineFax has no power Printout contains blurred or smudged inkFax will not print reports Nothing appears on the LCDLCD messages Message Cause ActionClear Paper JAM Case of a power failure During a power failureSpecifications Canon INC