Samsung SCX-6545N System Requirements, Configuring network protocol via the machine, Windows

Page 27

If you are in a non-static IP address environment and need to set up a DHCP network protocol, go to http://developer.apple.com/networking/ bonjour/download/, select the Bonjour program that is appropriate for your computer operating system and install the program. This program will allow you to set network parameters automatically. Follow the instructions in the installation window. This program does not support Linux.

Configuring network protocol via the machine

You can set up TCP/IP network parameters, follow the steps listed below.

1.Make sure your machine is connected to the network with an RJ-45 Ethernet cable.

2.Make sure you have turned on the machine.

3.Press Machine Setup on the control panel.

4.Press Admin Setting.

5.When the login message appears, enter password. Touch the password input area, then the question marks appears. Use the number keypad on the control panel to enter the password. Once the password is entered, press OK. (Factory setting:1111)

6.Press the Setup tab > Network Setup.

7.Select TCP/IP Protocol.

Apple Talk Protocol: This protocol is widely used in Macintosh network environments.

Ethernet Speed: You can select the communication speed for Ethernet connections.

8.Press IP Setting.

9.Select Static and then enter IP Address, Subnet Mask and Gateway address fields. Touch the input area then, enter addresses by number keypad on the control panel.

Contact the network administrator if you are not sure how to configure.

10.Press OK.

You can also set up the network settings through the network administration programs.

SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from http:// solution.samsungprinter.com.

SyncThru™ Web Service: Web server embedded on your network print server, which allows you to:

-Configure the network parameters necessary for the machine to connect to various network environments.

-Customize machine settings.

-Customize email settings and set up address book for scanning to email.

-Customize server settings and set up address book for scanning to the FTP or SMB servers.

-Customize printer, copy, and fax settings

SetIP: Utility program allowing you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. See "IP setting using SetIP Program (Windows)" on page 30, "IP setting using SetIP Program (Macintosh)" on page 31, or"IP setting using SetIP Program (Linux)" on page 31.

AnyWeb Print: This tool helps you to screen-capture, preview, scrap and print the screen of Windows Internet Explorer more easily, than when you use the ordinary program. Click Start > All Programs > you machine name > AnyWeb Print to link the website where the tool is available for the download. This tool is available only for Windows operating systems.

SYSTEM REQUIREMENTS

Before you begin, ensure that your system meets the following requirements:

Windows

 

REQUIREMENT (RECOMMENDED)

OS

 

 

 

CPU

RAM

FREE HDD

 

 

SPACE

 

 

 

 

 

 

 

Windows 2000

Pentium II 400 MHz

64 MB

600 MB

 

(Pentium III 933 MHz)

(128 MB)

 

Windows XP

Pentium III 933 MHz

128 MB

1.5 GB

 

(Pentium IV 1 GHz)

(256 MB)

 

Windows

Pentium III 933 MHz

128 MB

1.25 GB to

Server 2003

(Pentium IV 1 GHz)

(512 MB)

2 GB

Windows

Pentium IV 1 GHz

512 MB

10 GB

Server 2008

(Pentium IV 2 GHz)

(2048 MB)

 

Windows

Pentium IV 3 GHz

512 MB

15 GB

Vista

 

(1024 MB)

 

 

 

 

 

Getting Started_ 26

Image 27
Contents Multi Functional Printer Special Features Features of your new laser MFPConvention Description Example Features by ModelsFeatures About this USER’S GuideFinding More Information Important Safety Symbols and Precautions Safety informationLaser Safety Statement Perchlorate Warning Ozone SafetyMercury Safety Power SaverFCC Information to the User Correct Disposal of Batteries in this ProductRadio Frequency Emissions FAX BrandingYou must earth this machine Ringer Equivalence NumberReplacing the Fitted Plug for UK only You should also know thatEC Certification Declaration of Conformity European CountriesOpenssl License Approvals and CertificationsOriginal Ssleay License Contents 41 41 Advanced tab Copying originals Changing the settings for each copyUsing special copy features Changing the scan feature settings DuplexReceiving a fax Color Mode Setting up a fax phonebookUsing the polling option Using MailboxSetting up the end Fax tone Sending a fax from a Computer About Document Box Understanding the Document box screenStoring documents to Document box Machine Setup Delayed start featureNotification feature Approval feature123 Precautions to take when installing accessories Understanding display messages Solving other problemsSamsung Scan Manager Problem 121 Accessories 122 How to purchase128 Rear view IntroductionPrinter Overview Front viewControl Panel Overview Touch screen Machine Setup buttonPower Saver button Introducing the Touch Screen and Useful ButtonsGreen Blinking Understanding the Status LEDInterrupt button OffAdd Delete Edit Detail Search Enter System Box tab Menu OverviewMain screen Machine StatusAdmin Setting Usage Page ReportDetail Delete Delete All Supplied Software Printer Driver FeaturesContents Feature PCL PostscriptSupported operating systems Setting UP the HardwareSetting UP the Network Getting startedRequirement Recommended Configuring network protocol via the machineSystem Requirements WindowsInstalling the Software MacintoshLinux Getting Started Machines Basic Settings Installing the program Setting the default tray and paperChanging the default settings IP setting using SetIP Program WindowsPrinting out the machine’s MAC address IP setting using SetIP Program MacintoshIP setting using SetIP Program Linux Understanding the KeyboardSaves and closes input result Cancel Cancels and closes input resultDadf Loading originals and print mediaLoading Originals On the scanner glassSelecting Print Media Type Size Dimensions Weighta Capacityb Specification on print mediaMedia Type Guidelines Media sizes supported in each modeMode Size Source Guidelines for special print mediaChanging the Size of the Paper in the Paper Tray Full Empty Loading PaperMulti-purpose tray Tips on using the multi-purpose traySetting the Paper Size and Type Advanced tab CopyingUnderstanding the Copy Screen Basic tabChanging the size of originals Changing the Settings for Each CopyCopying Originals Image tabCopying on both sides of originals Duplex Reducing or enlarging copiesChanging the darkness Using Special Copy FeaturesDeciding the form of copy output Collated / Staple Selecting the type of originalsPress Add Segment Press the Setup tab Copy Setup Manual ID Copy SetupID card copying Copying ID with the manual ID copy optionPress the Advanced tab ID Copy Manual ID Copy Up or 4-up copying N-upPoster copying Clone copyingTransparency copying Book copyingBooklet copying Cover copyingWatermark copying Erasing edgesErasing background images Shifting marginsOverlay copying Auto crop copyingPress the Advanced tab Auto Crop Scanning ScanningScanning Basics Understanding the Scan ScreenScan to Email Scan to PCScan to Server Scanning Originals and Sending Through Email Scan to Email Output tabPress Scan to Email Scanning and sending multiple documents in a single email Setting up an email accountClick Go to access the SyncThru Web Service Click Settings Network Settings Outgoing Mail ServerSMTPGroup Storing email addressesEntering email addresses by the address book IndividualScan Destination Using Samsung Scan ManagerEntering email addresses by the keyboard Set Scan Button tabScanning and sending to SMB/FTP server Scanning Originals and Sending VIA SMB/ FTP Scan to ServerChange Port tab Preparation for scanning to SMB/FTPDuplex Changing the Scan Feature SettingsResolution Feature Resolution DPI File FormatErase Background Color ModeOriginal Type DarknessFile Format Scan PresetBasic printing Canceling a Print JOBBasic printing Printing a DocumentFaxing Optional Faxing optionalPreparing to FAX Understanding the FAX ScreenSending a fax Setting the fax headerPress the Setup tab Fax Setup Machine ID & Fax No Sending a FAXRedialing the last number Delaying a fax transmissionSending a fax manually On Hook Dial Automatic resendingReceiving a FAX Receiving faxes in memory Adjusting the Document SettingsReceiving faxes manually using an extension telephone Receiving in secure receiving modeSetting UP a FAX Phonebook Storing individual fax numbers Speed Dial NoStoring Group fax numbers Group No Printing Deleting the polling document Using the Polling OptionSetting up a fax phonebook using SyncThru Web Service Storing the originals for pollingStoring originals in Mailbox Using MailboxPolling from a remote Mailbox Creating MailboxPrinting a Report After Sending a FAX Sending a FAX in Toll Save TimeFaxing to a remote Mailbox Forwarding a Received FAX to Other Destination Adding Documents to a Reserved Delay FAX JOBSending a FAX from a Computer Setting UP the END FAX ToneUnderstanding the USB Screen Using USB memory deviceUsing USB memory device About USB MemoryPress Scan to USB Scanning to AN USB Memory DeviceScan to USB ScanningMachine senses and determines the size of the original Press USB Scan to USB the Output tab File Format Press USB Scan to USB the Output tab Scan PresetFile Policy Press USB Scan to USB the Output tab QualityPrinting from a USB Memory Device To print a document from a USB memory devicePress USB Print Understanding the Document BOX Screen Using document boxUsing document box About Document BOXStoring Documents to Document BOX Using document box Workflow Screen Using standard workflowAbout Standard Workflow Understanding the Standard Workflow ScreenTransmit Tab Various Operations with WorkformWorkform Creating Screen Input TabScan to multi-destination Delayed start featureNotification feature Approval featureBrowsing the MACHINE’S Status Machine status and advanced setupMachine Setup Admin Setting screenOption Description General SettingsSetting the Setup tab Optional Service AdjustmentWithin Job Offsetting to On, the output paper is ContentionFAX Setup Copy SetupNetwork Setup Security Access ControlAuthentication mode, the users Authentication NetworkMethod Authentication Authentication system can beSelect the IP Address or Host Name User Authentication MethodExternal Authentication Server from Security Network Select Security External Authentication Server SMB ServerInformation Hiding Optional ServiceChange Admin. Password LogStandard Workflow Management Document BOX ManagementPrinting a Report Maintenance Maintaining the Toner Cartridge Replacing the toner cartridge Handling instructionsUse of non-Samsung and refilled toner cartridge Estimated cartridge lifeMaintaining the Imaging Unit Expected cartridge lifeReplacing the imaging unit Maintenance Items Yield Average Maintenance PartsTo access SyncThru Web Service Managing Your Machine from the WebsiteClearing Document Jams TroubleshootingTroubleshooting Tips for Avoiding Paper JamsRoller misfeed Misfeed of exiting paperClearing Paper Jams TrayMessage Location of JAM GO to Optional tray Optional high capacity feeder Troubleshooting Paper exit area Fuser area or around the toner cartridgeDuplex unit area Stacker finisherPaper jam in front of finisher Message Meaning Suggested Solutions Understanding Display MessagesPaper jam at exit of finisher Install it Imaging unit is Finisher error zzzFuser error zzz Installed correctlyAdmin Setting to Switch is locked orAnother problem Not installed. InstallCondition Suggested Solutions Solving Other ProblemsTouch screen problem Paper feeding problemsCondition Possible Cause Suggested Solutions Printing problemsSource Selects printMaterials from Wrong paperPrinting quality problems Curl or wave MisformedCharacters SkewScanning problems Copying problemsSamsung Scan Manager Problem Fax problemsCommon PostScript problems Problem Possible Solution Cause Common Windows problemsCommon Linux problems Not scan Common Macintosh problemsSupplies Ordering supplies and accessoriesAccessories Ordering supplies and accessoriesKit HOW to PurchaseFDI Foreign Device InterfaceInstalling a memory module Installing accessoriesPrecautions to Take When Installing Accessories Installing a Memory DimmSelect the Samsung SCX-6545 Series PS printer Select Device SettingsReplacing the Stapler Activating the added memory in the PS printer propertiesEnabling FAX Feature After Installing the FAX Option KIT Specifications SpecificationsGeneral Specifications Printer SpecificationsCopier Specifications Scanner SpecificationsFacsimile Specifications Optional Glossary Fuser Unit ITU-T No chartEthernet EtherTalkNetWare ResolutionMAC address ModemWatermark Subnet MaskToner Cartridge UNC PathIndex Power Save Power Saver Linux problems 119 loading originalsMachine Info Machine Setup Optional service 91, 92 optional tray 18, 121 original sizeScanner lid 18 Scanner lock switch Scanning ProblemsReplacing stapler 124 Report 93 Resolution Scan preset 59 Scan to EmailContact samsung worldwide Contact Samsung worldwideCOUNTRY/REG Customer Care WEB Site ION Center Russia Page REV Software section Contents Using Windows PostScript Driver Using Smart Panel Page Installing Software for Local Printing Installing Printer Software\Setup.exe Custom InstallationBrowse Select Custom installation. Click NextTypical Installation Installing Software for Network PrintingCustom Installation Browse Select Repair and click Next Reinstalling Printer SoftwareRemoving Printer Software Printing a Document Basic PrintingPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Paper Tab Basic TabAdvanced Graphics TabScaling Options Font/TextUsing a Favorite Setting Advanced TabSamsung Tab Using Help Printing Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperChange percentage of your document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayPrinting Preferences Layout tabPrint on Both Sides Select Printers and FaxesPaper/Quality tab Pages Per SheetYou can select Paper Size, Graphic, and Document Options Printing Using the shortcut iconUsing the right-click menu Overview Direct Printing UtilityDouble-clickPrinters and Faxes Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxQuick Start Guide Scanning Using SmarThru OfficeUsing SmarThru Office Starting SmarThru OfficeUninstalling SmarThru Office Scan ToFax Windows Vista Scanning Process with TWAIN- enabled SoftwareToner Level Troubleshooting GuideDriver Setting Only for Windows Understanding Smart PanelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Tab Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Printers ConfigurationSharing Ports Between Printers and Scanners Scanners ConfigurationPorts Configuration Classes TabPrinting from Applications Configuring Printer Properties Printing a DocumentScanning a Document Printing FilesClick Properties Adding Job Type Settings Using the Image ManagerTools Function Select Uninstall and click Uninstall Installing SoftwareInstalling the printer software Uninstalling the printer softwareSelect Socket/HP Jet Direct in Printer Type Setting Up the PrinterFor a Network-connected Click Add on the Printer ListSelect your printer name For a USB-connectedChanging Printer Settings Printing a DocumentLayout Paper Job SettingGraphics Job AccountingOptional Finisher Printer FeaturesPrinter Settings Advanced OptionsPrinting on both sides of paper Printing Multiple Pages on One Sheet of PaperScanning with network Setting scan information in Scan ManagerScanning Scanning with USBIndex System requirements Macintosh
Related manuals
Manual 8 pages 17.3 Kb