Scanning
You can scan documents using Image Capture program. Macintosh OS offers Image Capture program.
Scanning with USB
1Make sure that the machine is connected to your computer and powered on.
2Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3Start Applications and click Image Capture.
NOTE: If No Image Capture device connected message appears, disconnect the USB cable and reconnect it. If the problem persists, please refer to the Image Capture’s help.
4Set the scan options on this program.
5Scan and save your scanned image.
NOTES:
•For more information about using Image Capture, refer to the Image Capture’s help.
•Use
•You can also scan using
•If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Capture operates properly in Mac OS X 10.3.9 or higher and Mac OS X 10.4.7 or higher.
Scanning with network
1Make sure that the machine is connected to your computer and powered on.
2Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3Start Applications and click Image Capture.
4Click Devices and click Browse Devices.
5For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use TWAIN software checkbox is checked, and click Connect.
•If a warning message appears, click Change Port.. to select port.
•If TWAIN UI appears, from the Preference tab, click Change Port.. to select port.
NOTE: Refer to Scan Manager for Change Port.. use. (See "Setting scan information in Scan Manager" on page 48.)
For Mac OS X 10.5~10.6:
Make sure that Connected checkbox is checked beside your machine in Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps above.
6Set the scan options on this program.
7Scan and save your scanned image.
NOTES:
•For more information about using Image Capture, refer to the Image Capture’s help.
•Use
•You can also scan using
•If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Capture operates properly in Mac OS X 10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan Manager
To find out about Scan Manager program information, to check the installed scan driver's condition, to change scan settings. and to add or delete the folders where scanned documents to computer are saved in Scan Manager program, follow these instructions:
1From the Smart Panel menu on Status bar, click Scan Manager.
2Select the appropriate machine from the Scan Manager .
3Press Properties.
4Use Set Scan Button to change the file destination or scan settings, to add or delete application programs, and to format files. You can change the scanning machine by using Change port. (Local or Network)
5When done, press OK.
48