Setting up a fax phonebook using SyncThru™ Web Service
You can store fax numbers conveniently from the networked computer using SyncThru™ Web Service.
Individual
1.Open the web browser in your computer.
2.Enter IP address of your machine, then SyncThru™ Web Service shows.
(Example. http://123.123.123.123)
3.Press Address Book > Individual.
4.Press Add.
5.Enter Name, Speed No., and Fax Number.
6.Press Apply.
Speed Dial numbers can be imported from an *.csv file.
Group
1.Open the web browser in your computer.
2.Enter IP address of your machine, then SyncThru™ Web Service shows.
(Example. http://123.123.123.123)
3.Press Address Book > Group.
4.Press Add Group.
5.Enter Group Name and Speed No..
6.Add individual ddresses to the fax group.
7.Press Apply.
USING THE POLLING OPTION
Polling is used when one fax machine requests another to send a document. This is useful when the person with the original document is not in the office. The person who wants to receive the document, calls the machine holding where the original is stored and requests that the document be sent. In other words, it "polls" the machine holding that has the original.
To use this feature, both the sender and receiver must have the polling feature.
The polling process is as follows:
1.Sender stores the originals in the machine. (See "Storing the originals for polling" on page 67.)
2.Sender gives the Passcode to the receiver.
3.Receiver dials the fax number and enters the Passcode when requested. (See "Polling a remote fax" on page 67.)
4.Receiver presses Start to receive the stored fax.
Storing the originals for polling
1.Press Fax from the Main screen.
2.Place the originals face up in the DADF. Or you can use the scanner glass with a single original document, face down.
3.Adjust the document settings in the Image tab and the Basic tab.
4.Press the Advanced tab > Polling > Store.
5.Press the input area then the pop up keyboard, enter Passcode (The
If you want to use the Mailbox, refer to Storing the originals in the Mailbox. (See "Storing originals in Mailbox" on page 68.)
6.Select the Delete On Poll option. If you select Off, the sent fax data will be remained in the machine’s memory even after it’s printing. If you select On, the fax data will be deleted at the printing point.
7.Press OK to start to store the originals into memory for polling.
8.Give the Passcode to the receiver.
Printing (Deleting) the polling document
1.Press Fax from the Main screen.
2.Press the Advanced tab > Polling > Print (or Delete).
3.Enter Passcode
4.Press OK.
Polling a remote fax
This option allows you to retrieve (poll) a fax which is stored in the remote machine.
1.Press Fax from the Main screen.
2.Press the Advanced tab > Polling > Poll from Remote.
Your can use Delay Poll From Remote to poll the fax at a specific time within 24 hours.
3.Enter Passcode and Destination Fax No using the number keypad on the control panel. You have to be informed Passcode from sender with the remote fax machine.
4.Press OK.