Samsung SCX-6545N manual General Settings, Option Description

Page 85

OPTION

DESCRIPTION

 

 

Machine Details

This option shows the customer support

 

information on the email address and the phone

 

number you stored from Admin Setting. Also, you

 

can check the machine's serial number, or the

 

hardware and software information specification.

 

 

Print/Report

You can print various helpful and informative

 

reports such as System Report, Fax Report and

 

Scan Report. (See "Printing a machine report" on

 

page 94.)

 

 

Tray Status

The screen shows the trays installed on your

 

machine, and their current configurations. Select

 

the tray and Edit to change the settings for paper

 

type and size.

 

 

Usage Counters

You can view the amount of each category that

 

your machine has printed so far. To print this

 

report, see "Printing a report" on page 93.

 

 

GENERAL SETTINGS

Before you get ready to using the machine, it is recommended to set up the machine parameters.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, then enter password and press OK. (Factory setting is 1111.)

3.Press the General tab.

OPTION

DESCRIPTION

 

 

Device Info

The sub-options available are Service Center

 

Registration and Contact Info. You may enter

 

information on service center and purchasing

 

point.

 

 

Date & Time

You can set the date and time. (See "Setting the

 

date and time" on page 29.)

 

 

Default Settings

• Default Window: Set the first window that will

 

appear on the display screen after turning on

 

the machine or waking up from the Power

 

Save. For example, if you select Fax as a

 

default window, the first window will be the

 

Basic tab of the Fax feature. In case you want

 

to show ID Copy as a default window, you need

 

to enable this feature in Default Option

 

previously.

 

• Default Option: Changes all the default values

 

for copying, faxing, emailing, scanning and

 

paper at once. (See "Changing the default

 

settings" on page 30.)

 

• Home: Changes the order of windows that will

 

appears on the display screen.

 

Depending on the optional kit you installed

 

or the category you selected, the selectable

 

options on the display screen may differ.

 

 

Measurements

This option lets you change the measurement unit

 

to use (mm or inch), and set the numeric

 

separation (comma or period).

 

 

Timers

The machine cancels a printing job if data does

 

not be received in specific time.

•System Timeout: The machine returns to the default value after certain time the machine waits. You can set a time for maximum 10 minutes.

•Held Job Timeout: The machine holds a job for a specific time period. You can set a time period for at least an hour.

Language

It allows you to change the language that appears

 

on the touch screen.

 

 

Power Saver

You can reduce energy consumption by setting

 

these features. Power Saver has three options,

 

first Scan Power Save turns off the scanner lamp

 

under the glass. And Power Save turns off all the

 

fans within the machine after a certain time. Low

 

Power Save turns off the fans within the machine

 

except a core fan for the fuser unit. (See "Using

 

energy saving feature" on page 29.)

Machine status and advanced setup_ 84

Page 84 Page 86
Image 85
Page 84 Page 86
Contents Multi Functional Printer Special Features Features of your new laser MFPFeatures Features by ModelsAbout this USER’S Guide Convention Description ExampleFinding More Information Important Safety Symbols and Precautions Safety informationLaser Safety Statement Mercury Safety Ozone SafetyPower Saver Perchlorate WarningRadio Frequency Emissions Correct Disposal of Batteries in this ProductFAX Branding FCC Information to the UserReplacing the Fitted Plug for UK only Ringer Equivalence NumberYou should also know that You must earth this machineOpenssl License Declaration of Conformity European CountriesApprovals and Certifications EC CertificationOriginal Ssleay License Contents Using special copy features Copying originals Changing the settings for each copyChanging the scan feature settings Duplex 41 41 Advanced tabUsing the polling option Color Mode Setting up a fax phonebookUsing Mailbox Receiving a faxAbout Document Box Understanding the Document box screen Setting up the end Fax tone Sending a fax from a ComputerStoring documents to Document box Notification feature Delayed start featureApproval feature Machine SetupSamsung Scan Manager Problem Understanding display messages Solving other problems121 Accessories 122 How to purchase 123 Precautions to take when installing accessories128 Printer Overview IntroductionFront view Rear viewControl Panel Overview Power Saver button Machine Setup buttonIntroducing the Touch Screen and Useful Buttons Touch screenInterrupt button Understanding the Status LEDOff Green BlinkingMain screen Menu OverviewMachine Status Add Delete Edit Detail Search Enter System Box tabUsage Page Report Admin SettingDetail Delete Delete All Contents Printer Driver FeaturesFeature PCL Postscript Supplied SoftwareSetting UP the Network Setting UP the HardwareGetting started Supported operating systemsSystem Requirements Configuring network protocol via the machineWindows Requirement RecommendedMacintosh Installing the SoftwareLinux Getting Started Machines Basic Settings Changing the default settings Setting the default tray and paperIP setting using SetIP Program Windows Installing the programIP setting using SetIP Program Linux IP setting using SetIP Program MacintoshUnderstanding the Keyboard Printing out the machine’s MAC addressSaves and closes input result Cancel Cancels and closes input resultLoading Originals Loading originals and print mediaOn the scanner glass DadfSelecting Print Media Type Size Dimensions Weighta Capacityb Specification on print mediaMode Size Source Media sizes supported in each modeGuidelines for special print media Media Type GuidelinesChanging the Size of the Paper in the Paper Tray Full Empty Loading PaperMulti-purpose tray Tips on using the multi-purpose traySetting the Paper Size and Type Understanding the Copy Screen CopyingBasic tab Advanced tabCopying Originals Changing the Settings for Each CopyImage tab Changing the size of originalsCopying on both sides of originals Duplex Reducing or enlarging copiesDeciding the form of copy output Collated / Staple Using Special Copy FeaturesSelecting the type of originals Changing the darknessID card copying Press the Setup tab Copy Setup Manual ID Copy SetupCopying ID with the manual ID copy option Press Add SegmentPoster copying Up or 4-up copying N-upClone copying Press the Advanced tab ID Copy Manual ID CopyBooklet copying Book copyingCover copying Transparency copyingErasing background images Erasing edgesShifting margins Watermark copyingAuto crop copying Overlay copyingPress the Advanced tab Auto Crop Scanning Basics ScanningUnderstanding the Scan Screen ScanningScan to PC Scan to EmailScan to Server Output tab Scanning Originals and Sending Through Email Scan to EmailPress Scan to Email Click Go to access the SyncThru Web Service Setting up an email accountClick Settings Network Settings Outgoing Mail ServerSMTP Scanning and sending multiple documents in a single emailEntering email addresses by the address book Storing email addressesIndividual GroupEntering email addresses by the keyboard Using Samsung Scan ManagerSet Scan Button tab Scan DestinationChange Port tab Scanning Originals and Sending VIA SMB/ FTP Scan to ServerPreparation for scanning to SMB/FTP Scanning and sending to SMB/FTP serverResolution Changing the Scan Feature SettingsFeature Resolution DPI File Format DuplexOriginal Type Color ModeDarkness Erase BackgroundFile Format Scan PresetBasic printing Canceling a Print JOBPrinting a Document Basic printingPreparing to FAX Faxing optionalUnderstanding the FAX Screen Faxing OptionalPress the Setup tab Fax Setup Machine ID & Fax No Setting the fax headerSending a FAX Sending a faxSending a fax manually On Hook Dial Delaying a fax transmissionAutomatic resending Redialing the last numberReceiving a FAX Receiving faxes manually using an extension telephone Adjusting the Document SettingsReceiving in secure receiving mode Receiving faxes in memoryStoring individual fax numbers Speed Dial No Setting UP a FAX PhonebookStoring Group fax numbers Group No Setting up a fax phonebook using SyncThru Web Service Using the Polling OptionStoring the originals for polling Printing Deleting the polling documentPolling from a remote Mailbox Using MailboxCreating Mailbox Storing originals in MailboxSending a FAX in Toll Save Time Printing a Report After Sending a FAXFaxing to a remote Mailbox Forwarding a Received FAX to Other Destination Adding Documents to a Reserved Delay FAX JOBSending a FAX from a Computer Setting UP the END FAX ToneUsing USB memory device Using USB memory deviceAbout USB Memory Understanding the USB ScreenScan to USB Scanning to AN USB Memory DeviceScanning Press Scan to USBMachine senses and determines the size of the original File Policy Press USB Scan to USB the Output tab Scan PresetPress USB Scan to USB the Output tab Quality Press USB Scan to USB the Output tab File FormatTo print a document from a USB memory device Printing from a USB Memory DevicePress USB Print Using document box Using document boxAbout Document BOX Understanding the Document BOX ScreenStoring Documents to Document BOX Using document box About Standard Workflow Using standard workflowUnderstanding the Standard Workflow Screen Workflow ScreenWorkform Creating Screen Various Operations with WorkformInput Tab Transmit TabNotification feature Delayed start featureApproval feature Scan to multi-destinationMachine Setup Machine status and advanced setupAdmin Setting screen Browsing the MACHINE’S StatusOption Description General SettingsWithin Job Offsetting to On, the output paper is AdjustmentContention Setting the Setup tab Optional ServiceFAX Setup Copy SetupNetwork Setup Security Access ControlMethod Authentication Authentication NetworkAuthentication system can be Authentication mode, the usersExternal Authentication Server from Security Network User Authentication MethodSelect Security External Authentication Server SMB Server Select the IP Address or Host NameChange Admin. Password Optional ServiceLog Information HidingStandard Workflow Management Document BOX ManagementPrinting a Report Maintenance Maintaining the Toner Cartridge Use of non-Samsung and refilled toner cartridge Handling instructionsEstimated cartridge life Replacing the toner cartridgeExpected cartridge life Maintaining the Imaging UnitReplacing the imaging unit Maintenance To access SyncThru Web Service Maintenance PartsManaging Your Machine from the Website Items Yield AverageTroubleshooting TroubleshootingTips for Avoiding Paper Jams Clearing Document JamsRoller misfeed Misfeed of exiting paperTray Clearing Paper JamsMessage Location of JAM GO to Optional tray Optional high capacity feeder Troubleshooting Paper exit area Fuser area or around the toner cartridgeStacker finisher Duplex unit areaPaper jam in front of finisher Understanding Display Messages Message Meaning Suggested SolutionsPaper jam at exit of finisher Fuser error zzz Finisher error zzzInstalled correctly Install it Imaging unit isAnother problem Switch is locked orNot installed. Install Admin Setting toTouch screen problem Solving Other ProblemsPaper feeding problems Condition Suggested SolutionsCondition Possible Cause Suggested Solutions Printing problemsMaterials from Selects printWrong paper SourcePrinting quality problems Characters MisformedSkew Curl or waveScanning problems Copying problemsFax problems Samsung Scan Manager ProblemCommon PostScript problems Problem Possible Solution Cause Common Windows problemsCommon Linux problems Not scan Common Macintosh problemsAccessories Ordering supplies and accessoriesOrdering supplies and accessories SuppliesFDI Foreign HOW to PurchaseDevice Interface KitPrecautions to Take When Installing Accessories Installing accessoriesInstalling a Memory Dimm Installing a memory moduleReplacing the Stapler Select Device SettingsActivating the added memory in the PS printer properties Select the Samsung SCX-6545 Series PS printerEnabling FAX Feature After Installing the FAX Option KIT General Specifications SpecificationsPrinter Specifications SpecificationsScanner Specifications Copier SpecificationsFacsimile Specifications Optional Glossary Ethernet ITU-T No chartEtherTalk Fuser UnitMAC address ResolutionModem NetWareToner Cartridge Subnet MaskUNC Path WatermarkIndex Machine Info Machine Setup Linux problems 119 loading originalsOptional service 91, 92 optional tray 18, 121 original size Power Save Power SaverReplacing stapler 124 Report 93 Resolution ProblemsScan preset 59 Scan to Email Scanner lid 18 Scanner lock switch ScanningContact Samsung worldwide Contact samsung worldwideCOUNTRY/REG Customer Care WEB Site ION Center Russia Page REV Software section Contents Using Windows PostScript Driver Using Smart Panel Page Installing Software for Local Printing Installing Printer Software\Setup.exe Custom InstallationBrowse Select Custom installation. Click NextTypical Installation Installing Software for Network PrintingCustom Installation Browse Select Repair and click Next Reinstalling Printer SoftwareRemoving Printer Software Printing a Document Basic PrintingPrinting to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Paper Tab Basic TabScaling Options Graphics TabFont/Text AdvancedAdvanced Tab Using a Favorite SettingSamsung Tab Using Help Printing Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersChange percentage of your document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayPrint on Both Sides Layout tabSelect Printers and Faxes Printing PreferencesPages Per Sheet Paper/Quality tabYou can select Paper Size, Graphic, and Document Options Using the right-click menu Using the shortcut iconOverview Direct Printing Utility PrintingSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Double-clickPrinters and FaxesUsing SmarThru Office Scanning Using SmarThru OfficeStarting SmarThru Office Quick Start GuideScan To Uninstalling SmarThru OfficeFax Windows Vista Scanning Process with TWAIN- enabled SoftwareDriver Setting Only for Windows Troubleshooting GuideUnderstanding Smart Panel Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Printers TabPorts Configuration Scanners ConfigurationClasses Tab Sharing Ports Between Printers and ScannersPrinting from Applications Configuring Printer Properties Printing a DocumentPrinting Files Scanning a DocumentClick Properties Adding Job Type Settings Using the Image ManagerTools Function Installing the printer software Installing SoftwareUninstalling the printer software Select Uninstall and click UninstallFor a Network-connected Setting Up the PrinterClick Add on the Printer List Select Socket/HP Jet Direct in Printer TypeSelect your printer name For a USB-connectedPrinting a Document Changing Printer SettingsLayout Graphics Job SettingJob Accounting PaperPrinter Settings Printer FeaturesAdvanced Options Optional FinisherPrinting on both sides of paper Printing Multiple Pages on One Sheet of PaperScanning Setting scan information in Scan ManagerScanning with USB Scanning with networkIndex System requirements Macintosh
Related manuals
Manual 8 pages 17.3 Kb
Top Page Image Contents