Connection and Setup
TV and Video Recorder Connection
Connect the satellite receiver (TV Scart socket) and the TV set by a Scart cable (see “Connection example”).
If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.
Connect the satellite receiver (VCR/AUX Scart socket) and the video recorder likewise by a Scart cable.
For system reasons, the same video signals are to be found on the Scart outputs and on the video cinch output.
If you are recording using an external video recorder, remember not to operate the receiver during recording, otherwise all the
Audio Connection
If you want to play the sound on your
SPDIF Connections (Electrical/Optical)
The electrical SPDIF cinch output and the optical output are for connection to a Dolby digital system (see “Connection example”).
Inserting Batteries in the Remote Control
Remove the cover on the rear of the remote control.
Insert the two supplied batteries into the remote control. Ensure correct polarity of the batteries; the + and – markings are indicated inside the battery compartment.
Slide the cover back into the housing until it locks in place.
Used batteries are special waste.
Do not throw used batteries into your household waste; take them to a collection point for old batteries.
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated public collection point.
15