Preface
Dear customer,
This Operating Manual is intended to help you make the fullest use of the extensive range of functions offered by your new satellite receiver.
We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible. To help you understand particular specialist terms that cannot be translated, we have added a short glossary at the end of the manual.
The power switch is an environmentally friendly feature. If you will not be using your receiver for a longer period, you should therefore use the power switch to disconnect it from the power supply to save energy. For shorter breaks, you can switch the receiver to standby on the remote control, which uses only a minimal amount of energy.
We wish you good reception and much pleasure using your new
Your
KATHREIN Team
Important Information
If you should experience any unexpected problems with your receiver, please contact your specialist dealer or our hotline:
Tel.: +49 8031
Fax: +49 8031
The programmes available on the satellites and transponders are subject to continual change. In such cases, it is necessary to reset the channels as the factory preset programming corresponds to the situation on the date of manufacture. The information for this reset can be found on the SAT 1 Videotext/Teletext service, on the Internet or in TV and radio magazines.
Your receiver is factory fitted with the latest software version. We are, however, constantly working on adapting the software to the wishes of our customers and to developments in technology. The “Software and Channel List Update” section contains additional information.
Please keep the original packaging in case you need to return the product at any time.
The hard disks are fragile due to their construction and are only adequately protected in the receiver by the original packaging.
If receiver is not shipped correctly the warranty on the hard disk will be voided.
UFO®micro and UFO®mini are registered trademarks of
DiSEqC™ is a trademark of Eutelsat.