Kathrein UFD 580S manual Accessing the Tvtv EPG, Current View

Page 30

TVTV EPG and Timer

Accessing the TVTV EPG

The

EPG is accessed by pressing the button, and

automatically displays the “Current” (Now showing) view (see

“Current” menu item), regardless of which EPG view you had been in beforehand.

“Current” View

The EPG automatically displays the “Current” (Now showing) view when first accessed, highlighting the current selected channel and the current programme.

In the main window you see the channel number at the left, the channel name and current programme in the centre, and a progress bar at the right.

In the top right-hand corner of the picture you see the current day, date and time. The box at the right indicates the day, date and duration of the programme, the programme category (in the example: "Series“), the programme's country of origin and the year it was made.

The bottom section of the display contains the EPG options selectable from any EPG view. Press

(red) to view the recording schedule (“Timer list”),

(green) to view the “Current” (Now showing) display,

(yellow) to view the “Programme list” (of the selected channel),

(blue) to view the daily highlight tips (one tip per day, a week ahead),

to view details of the selected programme, and

(red) to access the Record menu (the timer).

30

Image 30
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Preface Important InformationContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Receiver-Features Remote control RCRemote Control Menu Functions    Controls, Displays und Connections View of front panel flap folded down View of rear panelYou must run through steps 4-6 for each satellite received Operating Instructions Menu ConceptAlphanumeric Inputs Alphanumeric Assignment of Remote Control Number Buttons Language Selection OSDButton Reception System Presets Connection and SetupConnecting the Unit Sat if ConnectionOperation on one Antenna Connection ReceptionAudio Connection Inserting Batteries in the Remote ControlTV and Video Recorder Connection Spdif Connections Electrical/OpticalError Signalling Initial SetupPower Failure Safety Getting StartedReceiver Presetting On Screen Display OSD Important On-Screen DisplaysHelp Function Error Signalling TV Channel IdentifierRadio Channel Identifier TV/Radio Channel List Videotext Teletext Channel List Selecting a TV ProgrammeReception Status Selecting a TV Programme by Number Switching to a Radio Programme Common Interface Follow the instructions given by your Pay TV providerYou alone are responsible for use of the cards Common Interface Twin Functions Picture-in-Picture PIPTime-Shift One-Touch RecordingTvtv EPG and Timer Accessing the Tvtv EPG for the First TimeAccessing the Tvtv EPG Current ViewProgramme List Highlights Programmes Sorted by CategorySearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation Channel List SF2Recording and Watching TV LNB Configuration OverviewHard Disk Recorder Tuner inputRecording Hard Disk CapacityTime-Shift Recording One-Touch Recording OTR Timer Recording Stopping a RecordingSpecial Functions Split Take Playback and RecordingFast Forward/Fast Rewind no picture Playback = Setting Index Marks Skip Points Index marks at the end of a recordingSearch Audio ModeDelete Time-Shifted PlaybackStereo and Two-Channel Sound Playback Audio SettingsSetting the Volume MutingProgramme List FavouritesGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Deleting Programmes Manually Adding ProgrammesProgramme List Selecting the Last Programmes Received Password Factory Default Entering the PasswordPassword Parental Control Password Using the Front Panel Backup OperationSetting System Parameters Local Time/Timer System ParametersSystem Information Screen TV TypeAspect Ratio ModeSatellite Setup Adding/Removing SatellitesEntering a Satellite Name Removing SatellitesInstallation Menu LNB ConfigurationOscillator Frequency L.O Changing the Oscillator Frequency OperationReceiving Two Satellites DiSEqC Setting Tuner SelectAntenna Setup Antenna Rotor/Positioner DiSEqC1.2Satellite Scan TP Edit/Scan Transponder Selection ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontal Important Note on Deleting TranspondersAll new programmes are added to the existing programme list DiSEqC UFO Setup KHz SignalTone Burst and DiSEqC Signal DiSEqC Repeat Tone BurstDiSEqC UFO miniReset does not delete the pre-programming Procedure seeFactory Set Logging on to UFOmicro Video Recorder Connection PlaybackSoftware and Programme List Update Software and Programme List Update Programme List Download Receiver to Receiver Data TransferPreparations Operating System Software DownloadTechnical Features Technical AppendixTechnical Data Temperature range ConnectionsGeneral Accessories VHS/S-VHS SwitchingScart Socket Assignment Connection Example Troubleshooting Problem Cause RemedyShort Technical Guide DiSEqC componentsEB/NO ratio Transponder Symbol rateProgramme package Video bit rateGlossary Service SatelliteService Service Service 936.2576/B/0605/ZWT Technical data subject to change