Kathrein UFD 580S manual TV/Radio Channel List

Page 20

On Screen Display (OSD)

TV/Radio Channel List

Press the button to access the channel list.

At the top left is a + for the complete list. Information about the channel, the programme provider, and whether the programme is currently encrypted, is shown in the column underneath. In the upper right-hand column are details of the satellites received, the transponder and its frequency, and the polarisation. The desired programme can be chosen using the bar cursor or by entering the

relevant number and is then confirmed by pressing .

In the bottom right-hand corner you will find the “Programme/Channel Settings” menu. The factory settings for programmes and channels can be changed here.

Press the

button (red) to save the channel shown as a favourite channel

button (green) to lock the displayed channel

button (yellow) to move the channel to another position

button (blue) to delete the displayed channel from a position Press to add a new channel

Press to select the programme mode of the programme list.

Always follow further instructions or press to quit.

For more information refer to the “Programme Selection” section.

20

Image 20
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Preface Important InformationContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Receiver-Features Remote control RCRemote Control Menu Functions    Controls, Displays und Connections View of front panel flap folded down View of rear panelYou must run through steps 4-6 for each satellite received Alphanumeric Inputs Operating InstructionsMenu Concept Button Alphanumeric Assignment of Remote Control Number ButtonsLanguage Selection OSD Connection and Setup Connecting the UnitReception System Presets Sat if ConnectionOperation on one Antenna Connection ReceptionInserting Batteries in the Remote Control TV and Video Recorder ConnectionAudio Connection Spdif Connections Electrical/OpticalInitial Setup Power Failure SafetyError Signalling Getting StartedReceiver Presetting Help Function On Screen Display OSDImportant On-Screen Displays Radio Channel Identifier Error SignallingTV Channel Identifier TV/Radio Channel List Videotext Teletext Reception Status Channel ListSelecting a TV Programme Selecting a TV Programme by Number Switching to a Radio Programme You alone are responsible for use of the cards Common InterfaceFollow the instructions given by your Pay TV provider Common Interface Twin Functions Picture-in-Picture PIPTime-Shift One-Touch RecordingTvtv EPG and Timer Accessing the Tvtv EPG for the First TimeAccessing the Tvtv EPG Current ViewProgramme List Highlights Programmes Sorted by CategorySearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation Channel List SF2LNB Configuration Overview Hard Disk RecorderRecording and Watching TV Tuner inputRecording Hard Disk CapacityTime-Shift Recording One-Touch Recording OTR Timer Recording Stopping a RecordingSpecial Functions Split Take Playback and RecordingFast Forward/Fast Rewind no picture Playback = Setting Index Marks Skip Points Index marks at the end of a recordingAudio Mode DeleteSearch Time-Shifted PlaybackAudio Settings Setting the VolumeStereo and Two-Channel Sound Playback MutingProgramme List FavouritesGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Deleting Programmes Manually Adding ProgrammesProgramme List Selecting the Last Programmes Received Password Factory Default Entering the PasswordPassword Parental Control Password Using the Front Panel Backup OperationSetting System Parameters System Information Local Time/TimerSystem Parameters TV Type Aspect RatioScreen ModeSatellite Setup Adding/Removing SatellitesEntering a Satellite Name Removing SatellitesOscillator Frequency L.O Installation MenuLNB Configuration Receiving Two Satellites Changing the Oscillator FrequencyOperation DiSEqC Setting Tuner SelectAntenna Setup Antenna Rotor/Positioner DiSEqC1.2Satellite Scan TP Edit/Scan Transponder Selection All new programmes are added to the existing programme list ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalImportant Note on Deleting Transponders Tone Burst and DiSEqC Signal DiSEqC UFO SetupKHz Signal Tone Burst DiSEqCDiSEqC Repeat UFO miniFactory Set Logging on to UFOmicro Reset does not delete the pre-programmingProcedure see Video Recorder Connection PlaybackSoftware and Programme List Update Software and Programme List Update Receiver to Receiver Data Transfer PreparationsProgramme List Download Operating System Software DownloadTechnical Features Technical AppendixTechnical Data General Temperature rangeConnections Scart Socket Assignment AccessoriesVHS/S-VHS Switching Connection Example Troubleshooting Problem Cause RemedyEB/NO ratio Short Technical GuideDiSEqC components Symbol rate Programme packageTransponder Video bit rateGlossary Service SatelliteService Service Service 936.2576/B/0605/ZWT Technical data subject to change