Kathrein UFD 580 manual Audio Settings, Setting the Volume, Stereo and Two-Channel Sound Playback

Page 53

Audio Settings

Setting the Volume

Set the required volume level by pressing the button on the remote control of the receiver. A bar indicator is displayed on the screen to show the set volume.

Muting

Press to mute the sound. A red bar indicator appears.

Press the button again to restore the sound.

Stereo and Two-Channel Sound Playback

Use the yellow button to open the Audio menu for sound and language selection, where you can make the desired settings, e.g. subtitles, language selection (soundtrack), audio mode, digital output (MPEG stereo, AC 3), as long as they are included in the reception signal:

Select the menu options using the  buttons and make the

desired setting using the  buttons. Press the yellow button again to exit the menu.

Possible audio settings include:

AC 3

Be sure to follow the instructions in the manual for your Dolby Digital system.

Soundtrack

1 of 2

2 of 2

Audio mode

Stereo

Mono left or right

Digital Output

MPEG stereo

Dolby Digital/AC 3

The receiver has an electrical/optical audio output for AC3 format (Dolby Digital). This gives you the opportunity to bring cinema quality sound into your living room. The AC 3 sound is recorded and can be selected during playback. Connect the corresponding digital audio output to a Dolby Digital system.

If no AC3 signal is received, you can only make the normal stereo or mono settings, and choose the broadcast languages.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Important Information PrefaceContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Remote control RC Receiver-Features    Remote Control Menu FunctionsView of front panel flap folded down View of rear panel Controls, Displays und ConnectionsYou must run through steps 4-6 for each satellite received Alphanumeric Inputs Operating InstructionsMenu Concept Button Alphanumeric Assignment of Remote Control Number ButtonsLanguage Selection OSD Connecting the Unit Connection and SetupReception System Presets Sat if ConnectionReception Operation on one Antenna ConnectionTV and Video Recorder Connection Inserting Batteries in the Remote ControlAudio Connection Spdif Connections Electrical/OpticalPower Failure Safety Initial SetupError Signalling Getting StartedReceiver Presetting Help Function On Screen Display OSDImportant On-Screen Displays Radio Channel Identifier Error SignallingTV Channel Identifier TV/Radio Channel List Videotext Teletext Reception Status Channel ListSelecting a TV Programme Selecting a TV Programme by Number Switching to a Radio Programme You alone are responsible for use of the cards Common InterfaceFollow the instructions given by your Pay TV provider Common Interface Picture-in-Picture PIP Twin FunctionsOne-Touch Recording Time-ShiftAccessing the Tvtv EPG for the First Time Tvtv EPG and TimerCurrent View Accessing the Tvtv EPGProgramme List Programmes Sorted by Category HighlightsSearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation SF2 Channel ListHard Disk Recorder LNB Configuration OverviewRecording and Watching TV Tuner inputHard Disk Capacity RecordingTime-Shift Recording One-Touch Recording OTR Stopping a Recording Timer RecordingSpecial Functions Playback and Recording Split TakePlayback Fast Forward/Fast Rewind no picture = Index marks at the end of a recording Setting Index Marks Skip PointsDelete Audio ModeSearch Time-Shifted PlaybackSetting the Volume Audio SettingsStereo and Two-Channel Sound Playback MutingFavourites Programme ListGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Manually Adding Programmes Deleting ProgrammesProgramme List Selecting the Last Programmes Received Factory Default Entering the Password PasswordPassword Parental Control Password Backup Operation Using the Front PanelSetting System Parameters System Information Local Time/TimerSystem Parameters Aspect Ratio TV TypeScreen ModeAdding/Removing Satellites Satellite SetupRemoving Satellites Entering a Satellite NameOscillator Frequency L.O Installation MenuLNB Configuration Receiving Two Satellites Changing the Oscillator FrequencyOperation Tuner Select DiSEqC SettingAntenna Rotor/Positioner DiSEqC1.2 Antenna SetupSatellite Scan TP Edit/Scan Transponder Selection All new programmes are added to the existing programme list ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalImportant Note on Deleting Transponders Tone Burst and DiSEqC Signal DiSEqC UFO SetupKHz Signal DiSEqC Tone BurstDiSEqC Repeat UFO miniFactory Set Logging on to UFOmicro Reset does not delete the pre-programmingProcedure see Playback Video Recorder ConnectionSoftware and Programme List Update Software and Programme List Update Preparations Receiver to Receiver Data TransferProgramme List Download Operating System Software DownloadTechnical Appendix Technical FeaturesTechnical Data General Temperature rangeConnections Scart Socket Assignment AccessoriesVHS/S-VHS Switching Connection Example Problem Cause Remedy TroubleshootingEB/NO ratio Short Technical GuideDiSEqC components Programme package Symbol rateTransponder Video bit rateGlossary Satellite ServiceService Service Service 936.2576/B/0605/ZWT Technical data subject to change
Top Page Image Contents