Kathrein UFD 580S manual Technical Appendix, Technical Features

Page 87

Technical Appendix

Technical Features

The twin-Sat receiver UFD 580 has two separate reception and signal processing paths. This allows you to record a programme and simultaneously zap through other programmes, or to record two different programmes and at the same time watch one of them (either live or time-shifted) or another previously recorded programme.

The following functions are also available: Reception of digital TV and radio programmes

Common Interface for two CA modules for Pay TV (not included) Suitable for software updating via satellite or RS232 port

PIP (Picture-in-Picture), optional access across all channels One-touch recording

Time-shift recording Loop-through Sat IF input

Videotext/Teletext processing internal and via TV set 4000 programme memory slots

Satellite input frequency range from 2 x 950 MHz to 2150 MHz EPG (Electronic Programme Guide with timer function) USB 2.0 port for hard disk data download

(PC software available from http://www.kathrein.de/esc-kathrein/ download/ufd/firmware_ufd580.cfm)

Mains switch with mains power isolation

Automatic date and time setting via DVB data stream

On-screen display (OSD) in 8 languages (Dutch, English, French, German, Italian, Portuguese, Spanish, Turkish)

4-character LED display

DiSEqC™1.2 and tone burst control signal Operation with UFO®mini and UFO®micro RS 232 port for data copying Programme scan and sort functions

Automatic aspect ratio recognition (optional 4:3 or 16:9 picture format) Volume adjustment and muting

Radio button

Infrared remote control

2 Scart sockets (TV and VCR/AUX connection) Additional audio outputs via cinch sockets

Electrical and optical output for Dolby Digital data stream output (AC 3) RF level indicator

87

Image 87
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Important Information PrefaceContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Remote control RC Receiver-Features    Remote Control Menu FunctionsView of front panel flap folded down View of rear panel Controls, Displays und ConnectionsYou must run through steps 4-6 for each satellite received Operating Instructions Menu ConceptAlphanumeric Inputs Alphanumeric Assignment of Remote Control Number Buttons Language Selection OSDButton Sat if Connection Connection and SetupConnecting the Unit Reception System PresetsReception Operation on one Antenna ConnectionSpdif Connections Electrical/Optical Inserting Batteries in the Remote ControlTV and Video Recorder Connection Audio ConnectionGetting Started Initial SetupPower Failure Safety Error SignallingReceiver Presetting On Screen Display OSD Important On-Screen DisplaysHelp Function Error Signalling TV Channel IdentifierRadio Channel Identifier TV/Radio Channel List Videotext Teletext Channel List Selecting a TV ProgrammeReception Status Selecting a TV Programme by Number Switching to a Radio Programme Common Interface Follow the instructions given by your Pay TV providerYou alone are responsible for use of the cards Common Interface Picture-in-Picture PIP Twin FunctionsOne-Touch Recording Time-ShiftAccessing the Tvtv EPG for the First Time Tvtv EPG and TimerCurrent View Accessing the Tvtv EPGProgramme List Programmes Sorted by Category HighlightsSearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation SF2 Channel ListTuner input LNB Configuration OverviewHard Disk Recorder Recording and Watching TVHard Disk Capacity RecordingTime-Shift Recording One-Touch Recording OTR Stopping a Recording Timer RecordingSpecial Functions Playback and Recording Split TakePlayback Fast Forward/Fast Rewind no picture = Index marks at the end of a recording Setting Index Marks Skip PointsTime-Shifted Playback Audio ModeDelete SearchMuting Audio SettingsSetting the Volume Stereo and Two-Channel Sound PlaybackFavourites Programme ListGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Manually Adding Programmes Deleting ProgrammesProgramme List Selecting the Last Programmes Received Factory Default Entering the Password PasswordPassword Parental Control Password Backup Operation Using the Front PanelSetting System Parameters Local Time/Timer System ParametersSystem Information Mode TV TypeAspect Ratio ScreenAdding/Removing Satellites Satellite SetupRemoving Satellites Entering a Satellite NameInstallation Menu LNB ConfigurationOscillator Frequency L.O Changing the Oscillator Frequency OperationReceiving Two Satellites Tuner Select DiSEqC SettingAntenna Rotor/Positioner DiSEqC1.2 Antenna SetupSatellite Scan TP Edit/Scan Transponder Selection ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontal Important Note on Deleting TranspondersAll new programmes are added to the existing programme list DiSEqC UFO Setup KHz SignalTone Burst and DiSEqC Signal UFO mini Tone BurstDiSEqC DiSEqC RepeatReset does not delete the pre-programming Procedure seeFactory Set Logging on to UFOmicro Playback Video Recorder ConnectionSoftware and Programme List Update Software and Programme List Update Operating System Software Download Receiver to Receiver Data TransferPreparations Programme List DownloadTechnical Appendix Technical FeaturesTechnical Data Temperature range ConnectionsGeneral Accessories VHS/S-VHS SwitchingScart Socket Assignment Connection Example Problem Cause Remedy TroubleshootingShort Technical Guide DiSEqC componentsEB/NO ratio Video bit rate Symbol rateProgramme package TransponderGlossary Satellite ServiceService Service Service 936.2576/B/0605/ZWT Technical data subject to change