Kathrein UFD 580S manual Hard Disk Recorder, Recording and Watching TV, LNB Configuration Overview

Hard Disk Recorder

Recording and Watching TV

The two tuners and the hard disk of your twin-DVR Sat receiver offer you a range of possibilities to receive different satellites as well as to record and play back programmes.

The following table shows you which recording and playback options you have for each tuner input setting.

You will find the “Tuner input” submenu by pressing the  button. Then select “Installation”, “LNB configuration”, and confirm the satellite

you are receiving by pressing . You can make the settings here,

LNB Configuration - Overview

Tuner	Tuner input
Recorder
#1	#2	Loop	#1 & #2

Record and view one programme				
from a transponder in a polarisation
plane
Record one programme and view an				
additional programme from a single
transponder in a polarisation plane
Record one programme and view one				
of the programmes from different
transponders in one polarisation plane
Record two programmes and view				
one of the programmes from two
transponders in two polarisation
planes
Record two programmes and view				
one of the programmes from two
transponders and in two polarisation
planes
Simultaneous playback of a recording				

To proceed correctly:

For “#1”, tuner 1 must be connected to the antenna system. This applies, for example, to a satellite dish with a single LNB or a single- cable system.

For “#2”, tuner 2 must be connected to the antenna system. This applies, for example, to a satellite dish with a single LNB or a single- cable system.

For “#1 & #2”, connect each single input to a port of a two-cable system.

42