Setting System Parameters
The summer time should be corrected as necessary in order for the timers to turn on and off at correct times.
You can correct the time yourself in 30 minute increments using the buttons. To do this, move the cursor bar to the “Local time” item
using the button. Press twice to end your input. The receiver saves the new setting.
When you subsequently switch the receiver off, do so from the remote control - not at the mains switch, otherwise the settings will be lost.
TV Type
Here, you can use the buttons to specify whether your TV set is a
•PAL,
•
•NTSC
set.
Press twice to confirm.
Aspect Ratio
Here, you can use the buttons to select the type of picture format for which your TV set is designed. Either
•4:3 format or
•16:9 format or
•Auto
Press twice to confirm.
Screen
Here, you can use the buttons to select the type of screen display.
•Conventional (P/S) = standard representation for 4:3 sets or
•Letterbox display – This setting enforces the widescreen format for a 16:9 set.
Press twice to confirm.
A/V Mode
Here, you can use the buttons to select the type of video signal at the Scart socket. Select the signal that your TV set can process.
Refer to the operating instructions for your television set!
•Composite colour – composite baseband signal
•RGB – Red/Green/Blue signal or
•Y/C –
Press twice to confirm your selection.
69