Initial Setup
Receiver Presetting
Your receiver is factory pre-programmed to receive the ASTRA (19° East/28°East) and HotBird satellites, as well as Eutelsat 10E and 16E, TurkSat 42E, Telecom 5W and 8W, and others. You do not normally need to make any additional settings. If you are not connected to a communal system, you will need a multifeed arrangement with at least two LNBs in front of the satellite dish in order to receive multiple satellite systems. Consult your specialist dealer on this.
Before you change the basic settings of your receiver, write down the settings on the form provided at the end of this operating manual. You will then be able to restore the original settings at any time.