Kathrein UFD 580S manual Delete, Audio Mode, Search, Time-Shifted Playback

Page 52

Hard Disk Recorder

Index marks can be cleared in pairs by running a scan to navigate to them and pressing the button.

Time-Shifted Playback

During a running recording, you can call up and replay scenes from the running programme as it is being recorded (see below) or play the entire programme time-shifted while it is still running, by pressing the fast-forward or rewind button.

See also “Time-shift”.

Audio Mode

The audio mode is set with the yellow button. In our “control console” example, stereo mode (S) is set. Above it, audio mode “2 Ch” specific to the programme location is displayed, and “5.1 Ch” for Dolby.

All sound variants are recorded with the reception signal, so you can then select them during playback (yellow button).

Search

See “Playback” section, under “Drive functions can be accessed with the following remote control buttons”:

Delete

To delete a recording, access the “HD programme guide” by pressing the button. Use the  buttons to select the recording you want to delete and press the blue button. You will then be asked if you

really want to delete the recording. Confirm with or press to cancel.

A deleted recording cannot be retrieved!

Recordings cannot be deleted during recording!

52

Image 52
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Preface Important InformationContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Receiver-Features Remote control RCRemote Control Menu Functions    Controls, Displays und Connections View of front panel flap folded down View of rear panelYou must run through steps 4-6 for each satellite received Menu Concept Operating InstructionsAlphanumeric Inputs Language Selection OSD Alphanumeric Assignment of Remote Control Number ButtonsButton Connection and Setup Connecting the UnitReception System Presets Sat if ConnectionOperation on one Antenna Connection ReceptionInserting Batteries in the Remote Control TV and Video Recorder ConnectionAudio Connection Spdif Connections Electrical/OpticalInitial Setup Power Failure SafetyError Signalling Getting StartedReceiver Presetting Important On-Screen Displays On Screen Display OSDHelp Function TV Channel Identifier Error SignallingRadio Channel Identifier TV/Radio Channel List Videotext Teletext Selecting a TV Programme Channel ListReception Status Selecting a TV Programme by Number Switching to a Radio Programme Follow the instructions given by your Pay TV provider Common InterfaceYou alone are responsible for use of the cards Common Interface Twin Functions Picture-in-Picture PIPTime-Shift One-Touch RecordingTvtv EPG and Timer Accessing the Tvtv EPG for the First TimeAccessing the Tvtv EPG Current ViewProgramme List Highlights Programmes Sorted by CategorySearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation Channel List SF2LNB Configuration Overview Hard Disk RecorderRecording and Watching TV Tuner inputRecording Hard Disk CapacityTime-Shift Recording One-Touch Recording OTR Timer Recording Stopping a RecordingSpecial Functions Split Take Playback and RecordingFast Forward/Fast Rewind no picture Playback = Setting Index Marks Skip Points Index marks at the end of a recordingAudio Mode DeleteSearch Time-Shifted PlaybackAudio Settings Setting the VolumeStereo and Two-Channel Sound Playback MutingProgramme List FavouritesGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Deleting Programmes Manually Adding ProgrammesProgramme List Selecting the Last Programmes Received Password Factory Default Entering the PasswordPassword Parental Control Password Using the Front Panel Backup OperationSetting System Parameters System Parameters Local Time/TimerSystem Information TV Type Aspect RatioScreen ModeSatellite Setup Adding/Removing SatellitesEntering a Satellite Name Removing SatellitesLNB Configuration Installation MenuOscillator Frequency L.O Operation Changing the Oscillator FrequencyReceiving Two Satellites DiSEqC Setting Tuner SelectAntenna Setup Antenna Rotor/Positioner DiSEqC1.2Satellite Scan TP Edit/Scan Transponder Selection Important Note on Deleting Transponders ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalAll new programmes are added to the existing programme list KHz Signal DiSEqC UFO SetupTone Burst and DiSEqC Signal Tone Burst DiSEqCDiSEqC Repeat UFO miniProcedure see Reset does not delete the pre-programmingFactory Set Logging on to UFOmicro Video Recorder Connection PlaybackSoftware and Programme List Update Software and Programme List Update Receiver to Receiver Data Transfer PreparationsProgramme List Download Operating System Software DownloadTechnical Features Technical AppendixTechnical Data Connections Temperature rangeGeneral VHS/S-VHS Switching AccessoriesScart Socket Assignment Connection Example Troubleshooting Problem Cause RemedyDiSEqC components Short Technical GuideEB/NO ratio Symbol rate Programme packageTransponder Video bit rateGlossary Service SatelliteService Service Service 936.2576/B/0605/ZWT Technical data subject to change