Kathrein UFD 580S manual Software and Programme List Update

Page 85

Software and Programme List Update

After the “Display Info” request an on-screen display appears which you should use as a guide.

Pay attention to all on-screen displays!

Following a software update you must reset Winter/Summer time as appropriate!

You can also download the updates from the Internet, at:

http://www.kathrein.de/ esc-kathrein/englisch/ download/ufd/ firmware_ufd580.cfm

You can move the light-coloured cursor bar using the  and or

buttons to select the item you want to deactivate (No). Items that are already inactive cannot be changed. If you only want to update the software but leave your channel list alone, deselect the “Channel List” field, or vice versa. You can also request “Info Text” only.

To update, move the cursor bar to “Start” and confirm with . The receiver then begins the update and displays the following message where applicable:

Once the update is complete, the receiver is re-initialised and starts operation again. In case of an error or no signal, the message “Download failed” appears.

Never turn off the receiver during the update process, as otherwise you could lose the entire software. If this happened, the receiver would have to be re-installed at the factory or using a PC and zero- modem cable. During the download “Please wait” flashes on-screen.

85

Image 85
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Important Information PrefaceContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Remote control RC Receiver-Features    Remote Control Menu FunctionsView of front panel flap folded down View of rear panel Controls, Displays und ConnectionsYou must run through steps 4-6 for each satellite received Menu Concept Operating InstructionsAlphanumeric Inputs Language Selection OSD Alphanumeric Assignment of Remote Control Number ButtonsButton Connecting the Unit Connection and SetupReception System Presets Sat if ConnectionReception Operation on one Antenna ConnectionTV and Video Recorder Connection Inserting Batteries in the Remote ControlAudio Connection Spdif Connections Electrical/OpticalPower Failure Safety Initial SetupError Signalling Getting StartedReceiver Presetting Important On-Screen Displays On Screen Display OSDHelp Function TV Channel Identifier Error SignallingRadio Channel Identifier TV/Radio Channel List Videotext Teletext Selecting a TV Programme Channel ListReception Status Selecting a TV Programme by Number Switching to a Radio Programme Follow the instructions given by your Pay TV provider Common InterfaceYou alone are responsible for use of the cards Common Interface Picture-in-Picture PIP Twin FunctionsOne-Touch Recording Time-ShiftAccessing the Tvtv EPG for the First Time Tvtv EPG and TimerCurrent View Accessing the Tvtv EPGProgramme List Programmes Sorted by Category HighlightsSearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation SF2 Channel ListHard Disk Recorder LNB Configuration OverviewRecording and Watching TV Tuner inputHard Disk Capacity RecordingTime-Shift Recording One-Touch Recording OTR Stopping a Recording Timer RecordingSpecial Functions Playback and Recording Split TakePlayback Fast Forward/Fast Rewind no picture = Index marks at the end of a recording Setting Index Marks Skip PointsDelete Audio ModeSearch Time-Shifted PlaybackSetting the Volume Audio SettingsStereo and Two-Channel Sound Playback MutingFavourites Programme ListGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Manually Adding Programmes Deleting ProgrammesProgramme List Selecting the Last Programmes Received Factory Default Entering the Password PasswordPassword Parental Control Password Backup Operation Using the Front PanelSetting System Parameters System Parameters Local Time/TimerSystem Information Aspect Ratio TV TypeScreen ModeAdding/Removing Satellites Satellite SetupRemoving Satellites Entering a Satellite NameLNB Configuration Installation MenuOscillator Frequency L.O Operation Changing the Oscillator FrequencyReceiving Two Satellites Tuner Select DiSEqC SettingAntenna Rotor/Positioner DiSEqC1.2 Antenna SetupSatellite Scan TP Edit/Scan Transponder Selection Important Note on Deleting Transponders ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalAll new programmes are added to the existing programme list KHz Signal DiSEqC UFO SetupTone Burst and DiSEqC Signal DiSEqC Tone BurstDiSEqC Repeat UFO miniProcedure see Reset does not delete the pre-programmingFactory Set Logging on to UFOmicro Playback Video Recorder ConnectionSoftware and Programme List Update Software and Programme List Update Preparations Receiver to Receiver Data TransferProgramme List Download Operating System Software DownloadTechnical Appendix Technical FeaturesTechnical Data Connections Temperature rangeGeneral VHS/S-VHS Switching AccessoriesScart Socket Assignment Connection Example Problem Cause Remedy TroubleshootingDiSEqC components Short Technical GuideEB/NO ratio Programme package Symbol rateTransponder Video bit rateGlossary Satellite ServiceService Service Service 936.2576/B/0605/ZWT Technical data subject to change