Kathrein UFD 580S manual Time-Shift Recording

Page 44

Hard Disk Recorder

Time-Shift Recording

If you cannot catch the beginning of a programme because you are occupied with something else, you can watch the programme in time- shift mode. You can start recording the current programme you are

watching by simply pressing the  button. The receiver switches to hard disk mode.

The red “T” in the info bar indicates time-shift recording. You see a freeze-frame image while the recording is running in the background. For a short time “R” flashes at the top left of the TV screen and the red standby LED on the front panel of the receiver flashes.

To start time-shifted playback, press the  button. You can control the recorder fast forward, rewind, pause and playback functions with

the corresponding buttons. When you press the  button the TV picture freezes, but the recording continues in the background. Press

again to resume.

You can hide the control console by pressing .

You can also view a current programme. To do this, stop playback by pressing the  button and quit hard disk mode with the  button.

You will be asked if you want to stop the recording. Press  again to switch to TV mode without interrupting the recording.

44

Image 44

Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Preface Important InformationContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Receiver-Features Remote control RCRemote Control Menu Functions    Controls, Displays und Connections View of front panel flap folded down View of rear panelYou must run through steps 4-6 for each satellite received Alphanumeric Inputs Operating InstructionsMenu Concept Button Alphanumeric Assignment of Remote Control Number ButtonsLanguage Selection OSD Connection and Setup Connecting the UnitReception System Presets Sat if ConnectionOperation on one Antenna Connection ReceptionInserting Batteries in the Remote Control TV and Video Recorder ConnectionAudio Connection Spdif Connections Electrical/OpticalInitial Setup Power Failure SafetyError Signalling Getting StartedReceiver Presetting Help Function On Screen Display OSDImportant On-Screen Displays Radio Channel Identifier Error SignallingTV Channel Identifier TV/Radio Channel List Videotext Teletext Reception Status Channel ListSelecting a TV Programme Selecting a TV Programme by Number Switching to a Radio Programme You alone are responsible for use of the cards Common InterfaceFollow the instructions given by your Pay TV provider Common Interface Twin Functions Picture-in-Picture PIPTime-Shift One-Touch RecordingTvtv EPG and Timer Accessing the Tvtv EPG for the First TimeAccessing the Tvtv EPG Current ViewProgramme List Highlights Programmes Sorted by CategorySearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation Channel List SF2LNB Configuration Overview Hard Disk RecorderRecording and Watching TV Tuner inputRecording Hard Disk CapacityTime-Shift Recording One-Touch Recording OTR Timer Recording Stopping a RecordingSpecial Functions Split Take Playback and RecordingFast Forward/Fast Rewind no picture Playback = Setting Index Marks Skip Points Index marks at the end of a recordingAudio Mode DeleteSearch Time-Shifted PlaybackAudio Settings Setting the VolumeStereo and Two-Channel Sound Playback MutingProgramme List FavouritesGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Deleting Programmes Manually Adding ProgrammesProgramme List Selecting the Last Programmes Received Password Factory Default Entering the PasswordPassword Parental Control Password Using the Front Panel Backup OperationSetting System Parameters System Information Local Time/TimerSystem Parameters TV Type Aspect RatioScreen ModeSatellite Setup Adding/Removing SatellitesEntering a Satellite Name Removing SatellitesOscillator Frequency L.O Installation MenuLNB Configuration Receiving Two Satellites Changing the Oscillator FrequencyOperation DiSEqC Setting Tuner SelectAntenna Setup Antenna Rotor/Positioner DiSEqC1.2Satellite Scan TP Edit/Scan Transponder Selection All new programmes are added to the existing programme list ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalImportant Note on Deleting Transponders Tone Burst and DiSEqC Signal DiSEqC UFO SetupKHz Signal Tone Burst DiSEqCDiSEqC Repeat UFO miniFactory Set Logging on to UFOmicro Reset does not delete the pre-programmingProcedure see Video Recorder Connection PlaybackSoftware and Programme List Update Software and Programme List Update Receiver to Receiver Data Transfer PreparationsProgramme List Download Operating System Software DownloadTechnical Features Technical AppendixTechnical Data General Temperature rangeConnections Scart Socket Assignment AccessoriesVHS/S-VHS Switching Connection Example Troubleshooting Problem Cause RemedyEB/NO ratio Short Technical GuideDiSEqC components Symbol rate Programme packageTransponder Video bit rateGlossary Service SatelliteService Service Service 936.2576/B/0605/ZWT Technical data subject to change