Kathrein UFD 580S manual Receiver-Features, Remote control RC

Page 7

Receiver-Features

The UFD 580 has two separate tuners for simultaneous reception of two programmes, and a hard disk for recording and playback.

Depending on constellation, you can

view one programme and record another to hard disk,

play back one programme from the hard disk and record one programme to hard disk, or

record two programmes to hard disk and play back one programme from the hard disk, or

record two programmes to hard disk and view a programme from one of the programme packages being received.

To take advantage of all these opportunities, complex operating procedures are necessary. You should therefore read this operating manual thoroughly.

Remote control RC 660

The RC 660 remote control supports up to four devices as well as the receivers of the UFD 5xx (not UFD 552, 554, 558) and UFD 4xx families.

To configure a receiver to an infrared code: Switch on the relevant receiver.

On the remote control simultaneously press Address 1 = + +

to

Address 4 = + +

To configure the remote control to an infrared code: Switch to

Address 1 = +to

Address 4.= +

+ (red) = Kathrein UFD 5xx code for remote control RC 400

The RC 600 and RC 650 remote controls cannot be replaced!

7

Image 7
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Important Information PrefaceContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Remote control RC Receiver-Features    Remote Control Menu FunctionsView of front panel flap folded down View of rear panel Controls, Displays und ConnectionsYou must run through steps 4-6 for each satellite received Menu Concept Operating InstructionsAlphanumeric Inputs Language Selection OSD Alphanumeric Assignment of Remote Control Number ButtonsButton Sat if Connection Connection and SetupConnecting the Unit Reception System PresetsReception Operation on one Antenna ConnectionSpdif Connections Electrical/Optical Inserting Batteries in the Remote ControlTV and Video Recorder Connection Audio ConnectionGetting Started Initial SetupPower Failure Safety Error SignallingReceiver Presetting Important On-Screen Displays On Screen Display OSDHelp Function TV Channel Identifier Error SignallingRadio Channel Identifier TV/Radio Channel List Videotext Teletext Selecting a TV Programme Channel ListReception Status Selecting a TV Programme by Number Switching to a Radio Programme Follow the instructions given by your Pay TV provider Common InterfaceYou alone are responsible for use of the cards Common Interface Picture-in-Picture PIP Twin FunctionsOne-Touch Recording Time-ShiftAccessing the Tvtv EPG for the First Time Tvtv EPG and TimerCurrent View Accessing the Tvtv EPGProgramme List Programmes Sorted by Category HighlightsSearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation SF2 Channel ListTuner input LNB Configuration OverviewHard Disk Recorder Recording and Watching TVHard Disk Capacity RecordingTime-Shift Recording One-Touch Recording OTR Stopping a Recording Timer RecordingSpecial Functions Playback and Recording Split TakePlayback Fast Forward/Fast Rewind no picture = Index marks at the end of a recording Setting Index Marks Skip PointsTime-Shifted Playback Audio ModeDelete SearchMuting Audio SettingsSetting the Volume Stereo and Two-Channel Sound PlaybackFavourites Programme ListGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Manually Adding Programmes Deleting ProgrammesProgramme List Selecting the Last Programmes Received Factory Default Entering the Password PasswordPassword Parental Control Password Backup Operation Using the Front PanelSetting System Parameters System Parameters Local Time/TimerSystem Information Mode TV TypeAspect Ratio ScreenAdding/Removing Satellites Satellite SetupRemoving Satellites Entering a Satellite NameLNB Configuration Installation MenuOscillator Frequency L.O Operation Changing the Oscillator FrequencyReceiving Two Satellites Tuner Select DiSEqC SettingAntenna Rotor/Positioner DiSEqC1.2 Antenna SetupSatellite Scan TP Edit/Scan Transponder Selection Important Note on Deleting Transponders ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalAll new programmes are added to the existing programme list KHz Signal DiSEqC UFO SetupTone Burst and DiSEqC Signal UFO mini Tone BurstDiSEqC DiSEqC RepeatProcedure see Reset does not delete the pre-programmingFactory Set Logging on to UFOmicro Playback Video Recorder ConnectionSoftware and Programme List Update Software and Programme List Update Operating System Software Download Receiver to Receiver Data TransferPreparations Programme List DownloadTechnical Appendix Technical FeaturesTechnical Data Connections Temperature rangeGeneral VHS/S-VHS Switching AccessoriesScart Socket Assignment Connection Example Problem Cause Remedy TroubleshootingDiSEqC components Short Technical GuideEB/NO ratio Video bit rate Symbol rateProgramme package TransponderGlossary Satellite ServiceService Service Service 936.2576/B/0605/ZWT Technical data subject to change