Kathrein UFD 580S manual Selecting a TV Programme by Number

Channel List

A further option for selecting a different programme is to press the  button. The TV channel list is then displayed. The top right-hand column provides information relating to the satellite being received, the transponder and its transmission frequency, the polarisation, the symbol rate and the encryption. The left-hand column shows the programme location and name, the type of signal being received (FTA/encrypted), the favourites, and any locked channels.

Pay attention to the bar at the bottom of the on-screen display! It provides guidance on what to do next.

	Press the  buttons to move to the next programme, and use the
	 buttons to jump to the next or previous page.
	You can also select a programme by entering a number.
	Press the  button to exit the programme list and return to the
	programme already selected.
Selecting a TV Programme by Number
	You can select a different TV programme while a programme is
	running by entering the new programme's location number. Use the
	number pad buttons  to  to enter the programme locations.
Example:	You want to select "DSF“ at location number 15 (the order of TV
	programmes is fixed in the programme memory, so this only serves as
	an example).

To select this programme, press the numbers  and  one after the other. The receiver waits for about two seconds for input of the next number.

Do not input leading zeroes in front of the number. The 0 button is reserved for switching to AV mode.

The procedure for all other programmes - including those with three- or four-digit location numbers - is exactly the same.

23