Kathrein UFD 580S manual Channel List, Selecting a TV Programme, Reception Status

Page 22

Channel List

This section describes how you select TV programmes with your receiver and how you can set the desired volume.

The description of the functions assumes that the receiver has been properly connected.

If you wish to connect up the receiver yourself, please read the “Connection and Setup” section first.

Selecting a TV Programme

Reception Status

The following information describes how to select other programmes and what the on-screen displays look like.

To select additional TV programmes in ascending or descending order

in the programme memory, simply press the buttons after turning on the receiver.

Every time you press the button, an on-screen display shows you the selected programme together with the time, the programme start and end times and the programme title on an info bar, provided the relevant data is being broadcast.

You can permanently show or hide this info bar by pressing the button.

Encrypted programmes are indicated by the message “Encrypted channel”:

To view these programmes you will need an authorisation card - a PCMCIA card or Smartcard - from the Pay TV provider (see “Common Interface” section).

The CA module and Smartcard are not included in the supply package.

22

Image 22
Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Preface Important InformationContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Receiver-Features Remote control RCRemote Control Menu Functions    Controls, Displays und Connections View of front panel flap folded down View of rear panelYou must run through steps 4-6 for each satellite received Menu Concept Operating InstructionsAlphanumeric Inputs Language Selection OSD Alphanumeric Assignment of Remote Control Number ButtonsButton Reception System Presets Connection and SetupConnecting the Unit Sat if ConnectionOperation on one Antenna Connection ReceptionAudio Connection Inserting Batteries in the Remote ControlTV and Video Recorder Connection Spdif Connections Electrical/OpticalError Signalling Initial SetupPower Failure Safety Getting StartedReceiver Presetting Important On-Screen Displays On Screen Display OSDHelp Function TV Channel Identifier Error SignallingRadio Channel Identifier TV/Radio Channel List Videotext Teletext Selecting a TV Programme Channel ListReception Status Selecting a TV Programme by Number Switching to a Radio Programme Follow the instructions given by your Pay TV provider Common InterfaceYou alone are responsible for use of the cards Common Interface Twin Functions Picture-in-Picture PIPTime-Shift One-Touch RecordingTvtv EPG and Timer Accessing the Tvtv EPG for the First TimeAccessing the Tvtv EPG Current ViewProgramme List Highlights Programmes Sorted by CategorySearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation Channel List SF2Recording and Watching TV LNB Configuration OverviewHard Disk Recorder Tuner inputRecording Hard Disk CapacityTime-Shift Recording One-Touch Recording OTR Timer Recording Stopping a RecordingSpecial Functions Split Take Playback and RecordingFast Forward/Fast Rewind no picture Playback = Setting Index Marks Skip Points Index marks at the end of a recordingSearch Audio ModeDelete Time-Shifted PlaybackStereo and Two-Channel Sound Playback Audio SettingsSetting the Volume MutingProgramme List FavouritesGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Deleting Programmes Manually Adding ProgrammesProgramme List Selecting the Last Programmes Received Password Factory Default Entering the PasswordPassword Parental Control Password Using the Front Panel Backup OperationSetting System Parameters System Parameters Local Time/TimerSystem Information Screen TV TypeAspect Ratio ModeSatellite Setup Adding/Removing SatellitesEntering a Satellite Name Removing SatellitesLNB Configuration Installation MenuOscillator Frequency L.O Operation Changing the Oscillator FrequencyReceiving Two Satellites DiSEqC Setting Tuner SelectAntenna Setup Antenna Rotor/Positioner DiSEqC1.2Satellite Scan TP Edit/Scan Transponder Selection Important Note on Deleting Transponders ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontalAll new programmes are added to the existing programme list KHz Signal DiSEqC UFO SetupTone Burst and DiSEqC Signal DiSEqC Repeat Tone BurstDiSEqC UFO miniProcedure see Reset does not delete the pre-programmingFactory Set Logging on to UFOmicro Video Recorder Connection PlaybackSoftware and Programme List Update Software and Programme List Update Programme List Download Receiver to Receiver Data TransferPreparations Operating System Software DownloadTechnical Features Technical AppendixTechnical Data Connections Temperature rangeGeneral VHS/S-VHS Switching AccessoriesScart Socket Assignment Connection Example Troubleshooting Problem Cause RemedyDiSEqC components Short Technical GuideEB/NO ratio Transponder Symbol rateProgramme package Video bit rateGlossary Service SatelliteService Service Service 936.2576/B/0605/ZWT Technical data subject to change