Kathrein UFD 580S manual Password

Page 63

Password

You can make the following settings here:

Age Limit: This setting is only effective if the corresponding lock-out signals are transmitted.

Lock Channel Editing: Yes/No. With this option, you can lock or unlock the editing function for programme lists.

Lock Installation: Yes/No. With this option, you can lock or grant access to the installation menu.

New Password: Here you can enter your (new) password using the number buttons.

Verify Password: Here you enter your (new) password again, using the number buttons, to confirm it.

Personal: Here you enter the receiver identification which is displayed when the receiver is turned on. This is useful for identification in case of theft. Refer to the “Operating Instructions” section for information on how to use the number pad buttons on the remote control for alphanumeric input. The factory default setting is “Twin-DVR receiver”.

This completes all the settings to secure and identify your satellite receiver.

If you have forgotten your password, you must contact your dealer, who will be able to unlock your receiver for you.

63

Image 63

Contents Twin-DVR Sat Receiver UFD 580/580S With Hard Disk Drive Important Information PrefaceContents Factory Default Entering the Password Parental Control UFOmicro Safety Instructions Important Information Remote control RC Receiver-Features    Remote Control Menu FunctionsView of front panel flap folded down View of rear panel Controls, Displays und ConnectionsYou must run through steps 4-6 for each satellite received Operating Instructions Menu ConceptAlphanumeric Inputs Alphanumeric Assignment of Remote Control Number Buttons Language Selection OSDButton Sat if Connection Connection and SetupConnecting the Unit Reception System PresetsReception Operation on one Antenna ConnectionSpdif Connections Electrical/Optical Inserting Batteries in the Remote ControlTV and Video Recorder Connection Audio ConnectionGetting Started Initial SetupPower Failure Safety Error SignallingReceiver Presetting On Screen Display OSD Important On-Screen DisplaysHelp Function Error Signalling TV Channel IdentifierRadio Channel Identifier TV/Radio Channel List Videotext Teletext Channel List Selecting a TV ProgrammeReception Status Selecting a TV Programme by Number Switching to a Radio Programme Common Interface Follow the instructions given by your Pay TV providerYou alone are responsible for use of the cards Common Interface Picture-in-Picture PIP Twin FunctionsOne-Touch Recording Time-ShiftAccessing the Tvtv EPG for the First Time Tvtv EPG and TimerCurrent View Accessing the Tvtv EPGProgramme List Programmes Sorted by Category HighlightsSearch Function Details Programming a Recording Press  to save the selected recording data Timer List Overlaps of series timer recordings are displayed in orange Tvtv EPG and Timer Key to Symbols Explanation SF2 Channel ListTuner input LNB Configuration OverviewHard Disk Recorder Recording and Watching TVHard Disk Capacity RecordingTime-Shift Recording One-Touch Recording OTR Stopping a Recording Timer RecordingSpecial Functions Playback and Recording Split TakePlayback Fast Forward/Fast Rewind no picture = Index marks at the end of a recording Setting Index Marks Skip PointsTime-Shifted Playback Audio ModeDelete SearchMuting Audio SettingsSetting the Volume Stereo and Two-Channel Sound PlaybackFavourites Programme ListGenerating a Favourites List Alphabetical Channel Search Programme List Sorting Programmes Manually Adding Programmes Deleting ProgrammesProgramme List Selecting the Last Programmes Received Factory Default Entering the Password PasswordPassword Parental Control Password Backup Operation Using the Front PanelSetting System Parameters Local Time/Timer System ParametersSystem Information Mode TV TypeAspect Ratio ScreenAdding/Removing Satellites Satellite SetupRemoving Satellites Entering a Satellite NameInstallation Menu LNB ConfigurationOscillator Frequency L.O Changing the Oscillator Frequency OperationReceiving Two Satellites Tuner Select DiSEqC SettingAntenna Rotor/Positioner DiSEqC1.2 Antenna SetupSatellite Scan TP Edit/Scan Transponder Selection ASTRA, 12,603.75 MHz, symbol rate 22MSymb/s, horizontal Important Note on Deleting TranspondersAll new programmes are added to the existing programme list DiSEqC UFO Setup KHz SignalTone Burst and DiSEqC Signal UFO mini Tone BurstDiSEqC DiSEqC RepeatReset does not delete the pre-programming Procedure seeFactory Set Logging on to UFOmicro Playback Video Recorder ConnectionSoftware and Programme List Update Software and Programme List Update Operating System Software Download Receiver to Receiver Data TransferPreparations Programme List DownloadTechnical Appendix Technical FeaturesTechnical Data Temperature range ConnectionsGeneral Accessories VHS/S-VHS SwitchingScart Socket Assignment Connection Example Problem Cause Remedy TroubleshootingShort Technical Guide DiSEqC componentsEB/NO ratio Video bit rate Symbol rateProgramme package TransponderGlossary Satellite ServiceService Service Service 936.2576/B/0605/ZWT Technical data subject to change