Pitco Frialator SSHLV14 operation manual Display Problems Action

Page 37

INSTALLATION & OPERATIONAL SGLV MANUAL

13.6.3. COMPUTER & DIGITAL CONTROLLER DISPLAYS (IF EQUIPPED)

If your appliance is equipped with a computer or digital controller it may display the following messages on its display.

Display

Problems

Action

 

Controller is OFF

Press [I/O] key to turn controller ON

 

Oil/shortening temperature is low.

Wait for appliance to heat up.

 

Fryer is slowly heating.

 

 

Oil/shortening temperature is low.

Wait for appliance to heat up.

 

Fryer is slowly heating.

 

 

Oil/shortening temperature is low.

Wait for appliance to heat up.

 

Fryer is heating.

 

 

Oil/shortening is at temperature

Perform cooking activites as needed.

 

and ready to cook.

 

 

Drain valve is open while controller

Turn off appliance. Close drain valve

 

is on.

before turning appliance back on.

 

Ignition system has locked out.

Refer to Fryer Troubleshooting section

 

Incorrect probe reading.

Contact a qualified service technican.

 

Oil/shortening has reached an

Turn off appliance. Allow time for

 

unsafe temperature.

applicance to cool before turning on.

 

Incorrect probe reading.

Contact a qualified service technican.

 

Temperature probe is shorted.

Contact a qualified service technican.

 

This message indicates that oil in

Operators may (depending on settings)

 

the vat is in need of polishing.

polish now, or defer the polish filter

 

 

operation for a later time.

L20-407 rev. 1 (3/14)

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents
Reduced OIL Volume Frying System To the Purchaser To the PURCHASER, Owner and Store ManagerAppliance Start UP Preventative Maintenance Theory of Operation Installation Clearances InstallationChecking and Unpacking Your NEW Appliance Caster and leg types Leveling the Fryer LEGS/CASTERSInstallation Setup Fuel Supply Line Leak and Pressure TestingGAS Connection Quick Disconnect ConnectionElectrical Connections Ventilation and Fire Safety SystemsInspection Probe High Temperature LimitFilling the Appliance Initial AdjustmentsLighting Instructions OFF Main Burner System AdjustmentInitial Cleaning Operation Operational FeaturesBasic Operational Features Filling the Tank with Liquid Shortening Filling the FRY POTPush Button TOP OFF System is not Intended to Fill FRY Pots Temperature DELL’OLIO OIL TemperatureAppliance Start UP Θερμοκρασια ΛαδιουCooking Tips CookingComputer Controller Operation Automatic Boil Entry Water Detection To View Current Settings for COOK, SHAKE, and Hold TimesManual Boil Entry To Enter Programming Level 1 for the Store Manager To SET Cook TemperaturePassword Change or REQUIRED? Hold PRE-ALARMTo Exit Level 1 Programming To Enter Programming Level 2 for the Store ManagerRecovery Test Value Beeper Volume and ToneControl or Timer Left Side of Dual or Single VAT Language SelectionOther Displays Control or Timer Right Side of Dual VATComputer Shutdown Flush Hose Operation if EquippedPush Button OIL TOP OFF System Basket Lift OperationAutomatic OIL TOP System Option Quick Strain Filtering Filter Soon light flashing Cook Counter AdjustmentAppliance Shutdown Preventative MaintenanceReplacing the Filter Media if Equipped Cleaning the Cabinet Cleaning the Cook TankFilter Cleaning if Equipped Appliance InspectionMonthly Preventative Maintenance Weekly Preventative MaintenanceBoil OUT Procedure Temperature Check Safety Evaluation ANNUAL/PERIODIC Preventative Maintenance and InspectionTemperature Control System Mechanical InspectionVentilation Hood GAS Combustion SystemPower Failure TroubleshootingHigh Temperature Limit Switch Drain Valve InterlockSelf Cleaning Burner System not on ALL Models Filter Troubleshooting Chart if Equipped Troubleshooting Charts Fryer Troubleshooting ChartComputer & Digital Controller Displays if Equipped Display Problems ActionL20-407 rev 01/13
Related manuals
Manual 38 pages 50.47 Kb