6ENGLISH
7 Shake the bottle a little bit to distribute the heat evenly before you allow your baby to drink.
8 Check that the contents of the bottle are the correct temperature by pouring a few drops on the back of your hand.
Notes!
–The ring ensures that the hot steam heats up the bottle extremely fast to the right temperature. Warming the bottle without the ring, might result in a wrong temperature, therefore never use the bottle warmer without the ring.
–The dimensions of the bottle or the material of the bottle (glass in stead of plastic) may influence selecting the correct knob setting. Therefore always control the end temperature and adjust the setting of the knob.
Warning! When you leave the bottle in the bottle warmer after it is heated up, the temperature might increase a few degrees.
Warming baby food jars
1Turn the
2Connect the bottle warmer to the mains socket.
>The indicator lamp lights green.
3Remove the label and lid from the jar.
4Fill the beaker with 20ml water by using the water cup of the ring.
5Place the jar in the middle of the container and put the ring on top of it.
6Set the 
symbol.
>The indicator lamp lights red.
>When the right temperature is reached the indicator lamp will light green.