Panasonic WV-CS954 operating instructions Back

Page 16

5.Attach the safety wire for securing the camera to the mounting base.

Pull on the safety wire to make sure its ring is securely connected to the mounting base hook.

If the dust protection sheet that comes with the camera is affixed to the mounting base, remove it before performing the above step.

9.Separate the two parts of the decorative cover (comes with camera).

Press upwards on the decorative cover at the

points marked (indicated by the arrows, in the

illustration below) to unhook the two parts from each other.

* When removing the decorative cover, the direction to press ( ) is shown on the side of the decorative cover.

Back Unhook

Safety wire ring

Note: The safety wire is designed to allow the camera to hang from it. Do not apply force greater than the weight of the camera to the wire.

6.Install the camera onto the mounting base.

Aligning with the mounting base, press down on the camera as far as it will go and rotate in the direction indicated by the arrow.

7.Use the fixing screw you removed in step 1 to secure the camera to the mounting base.

8.Check the installation.

Is the camera is level and installed securely?

Is the camera free of looseness?

Does the fixed part of the camera remain in place when you try to rotate it?

15°

Rotate

Camera

Camera

 

Mounting

 

Base

Fix securely

Press

Fix securely

Press

 

Caution: Pressing up on the wrong side of the decorative cover can damage it.

10.Put the two pieces of the decorative cover on the left and right side of the camera, and hook them together.

Align the hooks and press the piece indicated by the arrow in the illustration below into the other piece.

 

Hold

Hold

Back

securely

securely

Align hook

PressPress

11. Slide the decorative cover up to the ceiling.

In the case of a top cable exit configuration, slide the decorative cover straight up and press it firmly against the ceiling.

In the case of a side cable exit configuration, align the cutout in the decorative cover with the cables as you slide it up, and press it firmly against the ceiling.

Top Cable Exit

Side Cable Exit

Configuration

Configuration

 

Align with

 

cutout

-16-

Image 16
Contents Color Cctv Camera English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityAccesories FeaturesOptional Accesories Precautions Operating Precautions Self-diagnosing Function Contents Construction Ensuring Trouble-free OperationInstallation Precautions Communication Parameters DIP Switch DIP Switch SettingsBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch DIP Switch Unit NumberCamera Installation Installing the CameraBack Uninstalling the Camera Uninstalling the CameraRemoving the Decorative Camera Connections How to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyRS485 Setup Enables X ON/X OFF data flow controlUSE AUTO1Using the Setup Menu Displaying the Setup MenuLanguage Setting When using the WV-CU650Using the Camera Setup Menu Camera SettingsALC When SUPER-D 3 is turned off When SUPER-D 3 is turned onShutter Speed Shutter OFF ↔ AutoOn MID Adjusting the Phase for Line-lock SynchronizationOFF Resolution Resolution Black and White Mode BW ModeBetween the color mode and the black White mode in accordance with pictureAuto Focus AF Mode ExampleZoom Limit Zoom Limit Auto Image Stabilizer StabilizerUsing the Pan/Tilt Setup Menu Position Setting Position SETPosition Number Selection Preset PAN / TiltPreset ID Setting Preset ID Auto Focus AF Mode Preset Speed Setting Preset SpeedScene File Setting Scene File Light Control ALC/MANUALDeleting a Preset Position DEL Configuring Auto PAN Detailed Settings PAN LimitAuto PAN Key Setting Auto PAN KEY Patrol Function Setting PatrolPrivacy Zone Setting Privacy Zone Image Hold Setting Image HoldDigital Flip Setting Digital Flip Proportional Pan/Tilt Setting PROPO. P/TArea Title Setting Area Title On UserTilt Angle Setting Tilt Angle Cleaning Settings CleaningAlarm Settings Using the Alarm Setup MenuConfiguring Detailed Motion Detector Settings for Mode ModeAutopan 1POSIPATROL1 Alarm 2POSIPATROL2 3POSISpecial Settings Using the Special Setup MenuAdjusting Picture Quality To delete a blemish compensation patternUsing the Scene Select Setting Menu Scene Select SettingScene Select Settings Quick Menu Settings Displaying the Quick Setup MenuPassword Settings Password Lock SettingsTurning Password Lock On and Off Changing the PasswordOK Reset RET TOP Controller Operation Setting ShortcutsIris Close Troubleshooting FIXProblem 37-38 36-37 Periodically check the power cord and plug Specifications GeneralPan and Tilt LensMain Functions Version Français Instructions DE Sécurité Importantes Limitation DE Responsabilité Déni DE LA GarantieAccessoires EN Option AccessoiresDéni DE LA Garantiecaractéristiques Mesures DE Précautions Précautions Pendant LE Fonctionnement Que faire si le message Over Heat apparaît sur l’écranNe pas mouiller la caméra Nettoyage de la caméra vidéoFonction d’auto-diagnostic Installation DE LA Caméra Vidéo Utilisation DU Menu DE ConfigurationRéglages DE LA Caméra Vidéo PAN/AZIMUTHObjectif ’objectif ne peut pas être remplacé Fonctionnement sans problèmePrécautions Pour L’INSTALLATION Emplacement et installation de la caméraLes vis doivent être commandées séparément Câblage de la caméra vidéoRéglages DES Interrupteurs DIP Paramètres de communications Interrupteur DIPÉmission de chaleur Degré d’humidité élevéNuméro de caméra vidéo déterminé Interrupteur DIP CaméraParamètres de communication RS485 Interrupteur DIP Interrupteur DIP Numéro deInstallation DE LA Caméra Vidéo Installation de la caméra vidéoBague du fil de sécurité Retrait du couvercle décoratif Enlever LA CaméraEnlever la caméra vidéo Capacités entrée/sortie d’alarme Informations relatives aux connecteurs accessoiresBranchements Mesures de précautionsComment assembler le câble et le connecteur acces- soire RS485 Ajust UtiliseActive le contrôle de flux de données ON/X OFFAffichage du menu de configuration Utilisation DU Menu DE ConfigurationRéglage de langue Réglages DE LA Caméra Vidéo Utilisation du menu de réglage de la CaméraOUI OUI Moyen OUI BASOUI Eleve Résolution Résolution Mode noir et blanc Mode NBSélectionne le mode noir et blanc Sélectionne le mode couleurMode de mise au point automatique Mode AF ExempleLimite de réglage de zoom Limite Zoom Stabilisateur d’images automatiquePAN/AZIMUTH Sélection du numéro de position PrepoZOOM/FOCUS PAN/AZIMUTHContrôle de lumière ALC/MANUEL Orig SÉQTRI SuivConfiguration des réglages détaillés d’AUTO PAN DemarageLimit PAN PAN/AZIMUTH ∑BOUTON SET ZOOM/FOCUS ∑BOUTON SET Maintien d’Image Image Memo 12 Réglage du titre de zone Titre ZoneTitre Zoneutil 14 Réglages de nettoyage Nettoyage Réglages DE L’ALARME Utilisation du menu de réglage de ’alarme1POSITION PATR12POSITION PATR23POSITION PATR3Utilisation du menu de réglage spécial Réglages SpéciauxPour effacer un motif de compensation d’imperfections Utilisation du menu de réglage de Sélection de scène Réglage DE Sélection DE ScèneAuto Élevé BAL BLC PERM2 Réglages DU Menu Rapide Affichage du menu de réglage rapideRéglages DU MOT DE Passe Réglages du verrouillage du mot de Passe MOT DE PasseNouveau MOT PASSE? Raccourcis Opération du contrôleur RéglageIris Fermer EN CAS DE Problèmes ProblèmeCause et action recommandée 88-89 87-88 Problème Caractéristiques Techniques Vision Nuit OFF CAG ÉlevéCAG OUI BAS, OUI MOYEN, OUI ELEVE, OFF OFF, SÉQ, TRI, Auto PAN, PATR, Suivi AutoSÉQ, TRI, Auto PAN, PATR, Suivi Auto OUI/OFF103 Imprimé au Japon

WV-CS954 specifications

The Panasonic WV-CS954 is a sophisticated and versatile CCTV camera designed for high-performance surveillance applications. This model is equipped with advanced features that make it ideal for various environments, whether indoor or outdoor.

One of the standout characteristics of the WV-CS954 is its exceptional image quality. The camera utilizes a high-resolution 1/3-inch CCD sensor that delivers crisp and clear images with a resolution of 540 TV lines. This ensures that even the finest details are captured, enabling effective monitoring and identification of subjects in various lighting conditions.

The WV-CS954 is also equipped with a powerful 10x optical zoom lens, enabling users to zoom in on subjects without sacrificing image clarity. This feature is particularly useful in scenarios where details are crucial, such as monitoring entry points or observing large areas. The camera also incorporates a digital zoom capability, which further extends its versatility for surveillance needs.

In terms of technology, the WV-CS954 integrates advanced features such as auto focus and auto iris functions, enhancing its performance in fluctuating light conditions. These technologies help maintain optimal exposure and sharpness, ensuring reliable operation regardless of the environment.

Another notable feature of the WV-CS954 is its pan and tilt capability. The camera can be remotely controlled to pan 360 degrees and tilt up to 180 degrees, offering flexible coverage of expansive areas. This allows operators to monitor large spaces efficiently, making it an excellent choice for retail stores, parking lots, and other open environments.

The camera is also designed with durability in mind. Its robust construction and weather-resistant design make it suitable for outdoor use, capable of withstanding various environmental challenges. Additionally, the WV-CS954 is compatible with various mounting options, further enhancing its adaptability in different settings.

For connectivity, the WV-CS954 supports both analog and digital interface options, making it easy to integrate into existing security systems. It is also compatible with Panasonic's comprehensive suite of video management software, enabling seamless surveillance operations.

In conclusion, the Panasonic WV-CS954 is a reliable and feature-rich surveillance camera that offers exceptional image quality, flexible monitoring capabilities, and robust design. Its advanced technologies and user-friendly features make it a top choice for security professionals looking to enhance their surveillance solutions.