Panasonic WV-CS954 Digital Flip Setting Digital Flip, Proportional Pan/Tilt Setting PROPO. P/T

Page 34

(10) Digital Flip Setting (DIGITAL FLIP)

Normally, a camera needs to stop when it points straight down during tilt. With digital flip, however, the camera is able to tilt from 0° to 180° in a single motion. This makes it possible to track objects passing directly under the camera more smoothly. The picture is flipped vertically and horizontally when the camera is at an angle of around 135°.

1.Move the cursor to DIGITAL FLIP, and then tilt the joystick left or right to toggle it on and off.

ON : Turns on digital flip. Note that the tilt range becomes 0° to 90° when ON is selected for the PAN LIMIT setting.

OFF : Turns off digital flip. With this setting, the tilt range is 0° to 90°.

Notes:

•Digital flip is performed when the joystick is held straight downwards only. It is not performed when the joystick is tilted in any other direction.

•When OFF is selected for DIGITAL FLIP, the following steps need to be performed in order to tilt the camera 180°.

(1)Tilt the joystick downwards to point the camera straight down.

(2)Tilt the joystick left or right to pan the camera 180°.

(3)Tilt the joystick upwards.

•Momentarily turn off DIGITAL FLIP and set the zoom limit to 30x magnification or less before setting a preset position directly from the WV- CU360C System Controller. You can turn these functions back on again after setting the preset position.

Note that digital flip cannot be specified for the 90° to 180° tilt range.

(11) Proportional Pan/Tilt Setting (PROPO. P/T)

This function optimizes the image by automatically adjusting the PAN/TILT (horizontal/vertical rotation) speed according to the zoom ratio.

1.Move the cursor to PROPO.P/T, and then tilt the joystick left or right to toggle it on and off.

ON : Pan/tilt speed is in inverse proportion to the zoom ratio.

OFF : The speed is constant at the fastest level regardless of the zoom ratio.

(12) Area Title Setting (AREA TITLE)

The area title function lets you display a direction indicator that appears in the picture to indicate the direction of the location being shown on the screen. Text can also be displayed in place of the direction indicators, if desired.

The direction indicators are N (north), NE (northeast), E (east), SE (southeast), S (south), SW (southwest), W (west), and NW (northwest).

1.Move the cursor to AREA TITLE, and then tilt the joystick left or right to turn the area title display function on or off.

-34-

ON (NESW) : Displays direction indicators.

 

Selecting ON (NESW) and pressing

 

the CAM (SET) button will display the

 

position (NESW) setting menu, which

 

you can use for configuring detailed

 

settings. (this page)

ON (USER)

: Displays user input text.

 

Selecting ON (USER) and pressing

 

the CAM (SET) button will display the

 

area title (USER) selection menu,

 

which you can use for configuring

 

detailed settings. (page 35)

OFF

: Turns off display of area title

 

direction indicators and text.

(1) When ON (NESW) is selected

After selecting ON (NESW), you can use the position (NESW) setting menu to configure detailed settings. Once you set the northerly (N) direction for the camera, all other directions are displayed automatically.

1.Move the cursor to →PUSH SET to the right of PAN/TILT, and then press the CAM (SET) button. This will display the PAN/TILT setting menu.

**DIRECTION(NESW)**

PAN/TILT

→PUSH SET

ZOOM/FOCUS

→PUSH SET

POSI

 

 

+

 

N

RET TOP

2.Use the joystick to point the camera north, and then press the CAM (SET) button.

**DIRECTION(NESW)**

PAN/TILT

→PUSH SET

ZOOM/FOCUS

→PUSH SET

POSI

U TILT D/L PAN R

+

N

RET TOP

3.Move the cursor to →PUSH SET to the right of ZOOM/FOCUS, and then press the CAM (SET) button.

This will display the ZOOM/FOCUS setting menu.

4.Move the joystick left, right, up and down to adjust the position of the lens focus, and then press the CAM (SET) key.

**DIRECTION(NESW)**

PAN/TILT

→PUSH SET

ZOOM/FOCUS

→PUSH SET

POSI

U ZOOM D/L FOCUS R

+

N

RET TOP

5.Move the cursor to POSI O, and then press the CAM (SET) button.

This will display the ID position setting menu.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Color Cctv Camera English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityAccesories FeaturesOptional Accesories Precautions Operating Precautions Self-diagnosing Function Contents Construction Ensuring Trouble-free OperationInstallation Precautions Communication Parameters DIP Switch DIP Switch SettingsBeware of high humidity Unit Number DIP Switch RS485 Communication Parameters DIP Switch DIP Switch Unit NumberCamera Installation Installing the CameraBack Uninstalling the Camera Uninstalling the CameraRemoving the Decorative Camera Connections How to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyUSE RS485 SetupEnables X ON/X OFF data flow control AUTO1Language Setting Using the Setup MenuDisplaying the Setup Menu When using the WV-CU650Using the Camera Setup Menu Camera SettingsALC Shutter Speed Shutter When SUPER-D 3 is turned offWhen SUPER-D 3 is turned on OFF ↔ AutoOn MID Adjusting the Phase for Line-lock SynchronizationOFF Between the color mode and the black Resolution ResolutionBlack and White Mode BW Mode White mode in accordance with pictureZoom Limit Zoom Limit Auto Focus AF ModeExample Auto Image Stabilizer StabilizerPosition Number Selection Preset Using the Pan/Tilt Setup MenuPosition Setting Position SET PAN / TiltPreset ID Setting Preset ID Scene File Setting Scene File Auto Focus AF ModePreset Speed Setting Preset Speed Light Control ALC/MANUALDeleting a Preset Position DEL Configuring Auto PAN Detailed Settings PAN LimitAuto PAN Key Setting Auto PAN KEY Patrol Function Setting PatrolPrivacy Zone Setting Privacy Zone Image Hold Setting Image HoldArea Title Setting Area Title Digital Flip Setting Digital FlipProportional Pan/Tilt Setting PROPO. P/T On UserTilt Angle Setting Tilt Angle Cleaning Settings CleaningConfiguring Detailed Motion Detector Settings for Mode Alarm SettingsUsing the Alarm Setup Menu ModeAutopan 1POSIPATROL1 PATROL2 Alarm2POSI 3POSIAdjusting Picture Quality Special SettingsUsing the Special Setup Menu To delete a blemish compensation patternUsing the Scene Select Setting Menu Scene Select SettingScene Select Settings Quick Menu Settings Displaying the Quick Setup MenuTurning Password Lock On and Off Password SettingsPassword Lock Settings Changing the PasswordOK Reset RET TOP Controller Operation Setting ShortcutsIris Close Troubleshooting FIXProblem 37-38 36-37 Periodically check the power cord and plug Pan and Tilt SpecificationsGeneral LensMain Functions Version Français Instructions DE Sécurité Importantes Limitation DE Responsabilité Déni DE LA GarantieAccessoires EN Option AccessoiresDéni DE LA Garantiecaractéristiques Mesures DE Précautions Ne pas mouiller la caméra Précautions Pendant LE FonctionnementQue faire si le message Over Heat apparaît sur l’écran Nettoyage de la caméra vidéoFonction d’auto-diagnostic Réglages DE LA Caméra Vidéo Installation DE LA Caméra VidéoUtilisation DU Menu DE Configuration PAN/AZIMUTHObjectif ’objectif ne peut pas être remplacé Fonctionnement sans problèmeLes vis doivent être commandées séparément Précautions Pour L’INSTALLATIONEmplacement et installation de la caméra Câblage de la caméra vidéoÉmission de chaleur Réglages DES Interrupteurs DIPParamètres de communications Interrupteur DIP Degré d’humidité élevéNuméro de caméra vidéo déterminé Interrupteur DIP CaméraParamètres de communication RS485 Interrupteur DIP Interrupteur DIP Numéro deInstallation DE LA Caméra Vidéo Installation de la caméra vidéoBague du fil de sécurité Retrait du couvercle décoratif Enlever LA CaméraEnlever la caméra vidéo Branchements Capacités entrée/sortie d’alarmeInformations relatives aux connecteurs accessoires Mesures de précautionsComment assembler le câble et le connecteur acces- soire Active le contrôle de flux de données RS485 AjustUtilise ON/X OFFAffichage du menu de configuration Utilisation DU Menu DE ConfigurationRéglage de langue Réglages DE LA Caméra Vidéo Utilisation du menu de réglage de la CaméraOUI OUI Moyen OUI BASOUI Eleve Sélectionne le mode noir et blanc Résolution RésolutionMode noir et blanc Mode NB Sélectionne le mode couleurLimite de réglage de zoom Limite Zoom Mode de mise au point automatique Mode AFExemple Stabilisateur d’images automatiquePAN/AZIMUTH Sélection du numéro de position PrepoZOOM/FOCUS PAN/AZIMUTHContrôle de lumière ALC/MANUEL TRI OrigSÉQ SuivConfiguration des réglages détaillés d’AUTO PAN DemarageLimit PAN PAN/AZIMUTH ∑BOUTON SET ZOOM/FOCUS ∑BOUTON SET Maintien d’Image Image Memo 12 Réglage du titre de zone Titre ZoneTitre Zoneutil 14 Réglages de nettoyage Nettoyage Réglages DE L’ALARME Utilisation du menu de réglage de ’alarme1POSITION PATR13POSITION 2POSITIONPATR2 PATR3Utilisation du menu de réglage spécial Réglages SpéciauxPour effacer un motif de compensation d’imperfections Utilisation du menu de réglage de Sélection de scène Réglage DE Sélection DE ScèneAuto Élevé BAL BLC PERM2 Réglages DU Menu Rapide Affichage du menu de réglage rapideRéglages DU MOT DE Passe Réglages du verrouillage du mot de Passe MOT DE PasseNouveau MOT PASSE? Raccourcis Opération du contrôleur RéglageIris Fermer EN CAS DE Problèmes ProblèmeCause et action recommandée 88-89 87-88 Problème Caractéristiques Techniques Vision Nuit OFF CAG ÉlevéSÉQ, TRI, Auto PAN, PATR, Suivi Auto CAG OUI BAS, OUI MOYEN, OUI ELEVE, OFFOFF, SÉQ, TRI, Auto PAN, PATR, Suivi Auto OUI/OFF103 Imprimé au Japon

WV-CS954 specifications

The Panasonic WV-CS954 is a sophisticated and versatile CCTV camera designed for high-performance surveillance applications. This model is equipped with advanced features that make it ideal for various environments, whether indoor or outdoor.

One of the standout characteristics of the WV-CS954 is its exceptional image quality. The camera utilizes a high-resolution 1/3-inch CCD sensor that delivers crisp and clear images with a resolution of 540 TV lines. This ensures that even the finest details are captured, enabling effective monitoring and identification of subjects in various lighting conditions.

The WV-CS954 is also equipped with a powerful 10x optical zoom lens, enabling users to zoom in on subjects without sacrificing image clarity. This feature is particularly useful in scenarios where details are crucial, such as monitoring entry points or observing large areas. The camera also incorporates a digital zoom capability, which further extends its versatility for surveillance needs.

In terms of technology, the WV-CS954 integrates advanced features such as auto focus and auto iris functions, enhancing its performance in fluctuating light conditions. These technologies help maintain optimal exposure and sharpness, ensuring reliable operation regardless of the environment.

Another notable feature of the WV-CS954 is its pan and tilt capability. The camera can be remotely controlled to pan 360 degrees and tilt up to 180 degrees, offering flexible coverage of expansive areas. This allows operators to monitor large spaces efficiently, making it an excellent choice for retail stores, parking lots, and other open environments.

The camera is also designed with durability in mind. Its robust construction and weather-resistant design make it suitable for outdoor use, capable of withstanding various environmental challenges. Additionally, the WV-CS954 is compatible with various mounting options, further enhancing its adaptability in different settings.

For connectivity, the WV-CS954 supports both analog and digital interface options, making it easy to integrate into existing security systems. It is also compatible with Panasonic's comprehensive suite of video management software, enabling seamless surveillance operations.

In conclusion, the Panasonic WV-CS954 is a reliable and feature-rich surveillance camera that offers exceptional image quality, flexible monitoring capabilities, and robust design. Its advanced technologies and user-friendly features make it a top choice for security professionals looking to enhance their surveillance solutions.
Top Page Image Contents