Panasonic WV-CS954 PAN / Tilt, Using the Pan/Tilt Setup Menu, Position Setting Position SET

PAN / TILT

■Using the Pan/Tilt Setup Menu

Display the pan/tilt setup menu from the setup menu to configure pan and tilt settings.

First, display the pan/tilt setup menu.

Use a shortcut (page 45) to switch between displaying or not displaying the pan, tilt, and zoom positions (during pan, tilt and zoom operation) on the monitor screen.

*The tilt position is displayed ranging from -5˚ to 90˚ to -5˚.

(2) Position Number Selection (MAP)

You could use the MAP item on the pan/tilt setup menu instead of the PRESET item to select a position number.

1.Move the cursor to MAP O, and then press the CAM (SET) button.

**PRESET POSITION**

	1	*	2	3	4
5			6	7	8
9			10	11	12
13			14	15	16
17			18	19	20
21			22	23	24
25			26	27	28
29			30	31	32

ID:DOOR 033-064 225-256

RET TOP

360°/ 90°/X001

Pan position Zoom ratio

Tilt position*

1.Display the setup menu (page 21), move the cursor to PAN/TILT O, and then press the CAM (SET) button. This will display the pan/tilt setup menu.

**PAN/TILT		SETUP**1/2				q
PRESET	1							w
MAP
						e
HOME POSITION		OFF
SELF RETURN		OFF
				t r
AUTO MODE		OFF
AUTOPAN KEY		AUTO PAN
						u y
PATROL
PRIVACY ZONE		OFF
				o i
IMAGE HOLD		OFF
DIGITAL FLIP		ON
						!1 !0
PROPO.P/T		ON
**PAN/TILT		SETUP**2/2			!2
AREA TITLE		ON(USER)					!3
TILT ANGLE		0°
			!4
CLEANING		OFF

RET TOP

*The following sections numbered q to !4explain how to use each of the pan/tilt setup menu items.

(1) Position Number Selection (PRESET)

Positions can be assigned numbers, each of which can be configured with a monitoring position and monitoring conditions.

You can use either the PRESET item or the MAP item on the pan/tilt setup menu to select a position number. Position numbers 1 through 4 are used for alarm functions (pages 37 and 38) and operating them.

1.Move the cursor to the 1 next to the PRESET item, and then tilt the joystick left or right to change the position number to the one you want.

2.Press the CAM (SET) button.

This registers the position number setting and displays the preset setting menu. (this page)

-27-

2.Move the cursor to the number you want to select, and then press the CAM (SET) button.

This registers the position number setting and displays the preset setting menu. (this page)

To select a position number in the range of 033 to 064, move the cursor to 33-64 in the lower left corner of the menu, and then press the CAM (SET) button. Preset numbers set subsequently are the same.

**PRESET POSITION**

33	34	35	36
37	38	39	40
41	42	43	44
45	46	47	48
49	50	51	52
53	54	55	56
57	58	59	60
61	62	63	64
ID:

065-096 001-032

RET TOP

Notes:

•An asterisk (*) to the right of a position number indicates that it already has a preset position assigned to it.

The home position number is indicated by the letter H next to the asterisk.

•When the cursor is located at a position number that has a position ID, the position ID text appears next to ID: on the menu screen.

●Position Setting (POSITION SET)

The position setting can be used to specify the camera position (pan and tilt), the lens zoom setting, and the focus setting.

1.Move the cursor to POSITION SET O and press the CAM (SET) button to display the position setting menu.

PRESET NO. 1*

POSITION SET

PRESET ID	ON
ALC/MANUAL	ALC
AF MODE	MANUAL L
DWELL TIME	10S
SCENE FILE	OFF
PRESET SPEED	••••••••I
	L	H

RET TOP DEL

2.Move the cursor to →PUSH SET to the right of PAN/TILT, and then press the CAM (SET) button to display the PAN/TILT setting menu.