Panasonic WV-CS954 operating instructions Auto Focus AF Mode, Example, Zoom Limit Zoom Limit

Page 26

Note: When near-infrared lamps are used, the image may be displayed out of focus and mode switching may not perform automatically.

3.If you selected AUTO in step 1, move the cursor to DURATION TIME and then tilt the joystick left to select the time the camera should wait before switching between the color mode and the black and white mode after there is a change in the

illuminance level.

Available Settings: 10 s - 30 s - 60 s - 300 s

(S)(L)

Note: When AUTO is selected, switching between the color mode and the black and white mode is not performed while pan, tilt, zoom, or focus is being performed.

4.Move the cursor to BURST (BW), and then tilt the joystick left or right to turn burst signal output on or off.

This setting is for black and white mode display. ON: Turns on burst signal output.

OFF: Turns off burst signal output.

Note: With some monitors and VCR models, output of a camera images in the black and white mode will not display a proper image unless a burst signal is provided. Select ON for this setting when using equipment that requires a burst signal.

(11) Auto Focus (AF MODE)

1.Move the cursor to AF MODE, and then tilt the joystick left or right to select an auto-focus mode setting.

MANUAL S.M.L : Activates auto-focus when the AF

button on the system controller is pressed.

AUTO S.M.L : Auto focus is used automatically when PAN, TILT or ZOOM are used in manual operation.

The letters S (Small), M (Medium), and L (Large) indicate the size of the auto-focus sensing area.

Notes:

The AUTO (S.M.L.) setting can be selected only when OFF, x2 FIX or x2 AUTO is selected for the electronic sensitivity enhancement (SENS UP). Any other SENS UP setting causes MANUAL (S.M.L.) to be selected automatically for the auto-focus mode (AUTO AF).

Zooming up from WIDE can cause the image to go out of focus.

Auto-focus may not be possible with the types of objects listed below. For such objects, focus manually.

Example:

Shiny or high intensity objects

Objects shot through wet or dirty glass

Pictures that are a mixture of distant and nearby objects

White walls and other single-color objects

Venetian blinds and other vertically striped objects

Slanted objects

Objects illuminated with low lighting

Auto-focus focuses on the object in the center of the picture, so objects around the outside periphery of the picture will not be in focus.

(12) Zoom Limit (ZOOM LIMIT)

1.Move the cursor to ZOOM LIMIT, and then tilt the joystick left or right to select a zoom limit setting. When doing manual operation, zoom operation cannot go beyond the zoom limit.

Optical zoom ranges from 1 to 30 magnifications, while digital zoom is used for higher magnifications (up to 300).

Note:

If zoom limit is set to more than 30x, then zoom operation pauses at 30x magnification.

Increasing the zoom to over 30x magnification (digital zoom) decreases the resolution.

You cannot set a zoom magnification of greater than 30x as a preset position.

(13) Auto Image Stabilizer (STABILIZER)

This function electronically compensates for an unstable camera image due to movement of a mounting pole or bracket.

1.Move the cursor to STABILIZER, and then tilt the joystick left or right to turn the stabilizer on or off. The default setting is OFF

ON : Automatically compensates for an unstable image.

OFF : Image stabilizer will not operate.

Notes:

The stabilizer may not be effective for the following subjects.

Example: • Objects illuminated with low lighting

Single-color objects (white walls etc)

Fast moving periodic action, such as mechanical vibration, may not be tracked.

The stabilizer does not work during PAN/TILT/ZOOM/FOCUS or when the camera setup menu is open.

When set to ON, some effective pixels on the edge of the CCD are used by the stabilization function. This may result in a small reduction in resolution and a narrower angle of view. After activating the image stabilizer function, check that the field of view is correct.

Image stabilization may not function where there is excessive camera movement or when the scene is low light or low contrast objects.

-26-

Image 26
Contents Color Cctv Camera English Version Important Safety Instructions EnglishDisclaimer of Warranty Limitation of LiabilityOptional Accesories FeaturesAccesories Precautions Operating Precautions Self-diagnosing Function Contents Construction Ensuring Trouble-free OperationInstallation Precautions Beware of high humidity DIP Switch SettingsCommunication Parameters DIP Switch Unit Number DIP Switch RS485 Communication Parameters DIP Switch DIP Switch Unit NumberCamera Installation Installing the CameraBack Removing the Decorative Camera Uninstalling the CameraUninstalling the Camera Connections How to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyUSE RS485 SetupEnables X ON/X OFF data flow control AUTO1Language Setting Using the Setup MenuDisplaying the Setup Menu When using the WV-CU650ALC Camera SettingsUsing the Camera Setup Menu Shutter Speed Shutter When SUPER-D 3 is turned offWhen SUPER-D 3 is turned on OFF ↔ AutoOFF Adjusting the Phase for Line-lock SynchronizationOn MID Between the color mode and the black Resolution ResolutionBlack and White Mode BW Mode White mode in accordance with pictureZoom Limit Zoom Limit Auto Focus AF ModeExample Auto Image Stabilizer StabilizerPosition Number Selection Preset Using the Pan/Tilt Setup MenuPosition Setting Position SET PAN / TiltPreset ID Setting Preset ID Scene File Setting Scene File Auto Focus AF ModePreset Speed Setting Preset Speed Light Control ALC/MANUALDeleting a Preset Position DEL Configuring Auto PAN Detailed Settings PAN LimitAuto PAN Key Setting Auto PAN KEY Patrol Function Setting PatrolPrivacy Zone Setting Privacy Zone Image Hold Setting Image HoldArea Title Setting Area Title Digital Flip Setting Digital FlipProportional Pan/Tilt Setting PROPO. P/T On UserTilt Angle Setting Tilt Angle Cleaning Settings CleaningConfiguring Detailed Motion Detector Settings for Mode Alarm SettingsUsing the Alarm Setup Menu ModePATROL1 1POSIAutopan PATROL2 Alarm2POSI 3POSIAdjusting Picture Quality Special SettingsUsing the Special Setup Menu To delete a blemish compensation patternScene Select Settings Scene Select SettingUsing the Scene Select Setting Menu Quick Menu Settings Displaying the Quick Setup MenuTurning Password Lock On and Off Password SettingsPassword Lock Settings Changing the PasswordOK Reset RET TOP Controller Operation Setting ShortcutsIris Close Troubleshooting FIXProblem 37-38 36-37 Periodically check the power cord and plug Pan and Tilt SpecificationsGeneral LensMain Functions Version Français Instructions DE Sécurité Importantes Limitation DE Responsabilité Déni DE LA GarantieDéni DE LA Garantiecaractéristiques AccessoiresAccessoires EN Option Mesures DE Précautions Ne pas mouiller la caméra Précautions Pendant LE FonctionnementQue faire si le message Over Heat apparaît sur l’écran Nettoyage de la caméra vidéoFonction d’auto-diagnostic Réglages DE LA Caméra Vidéo Installation DE LA Caméra VidéoUtilisation DU Menu DE Configuration PAN/AZIMUTHObjectif ’objectif ne peut pas être remplacé Fonctionnement sans problèmeLes vis doivent être commandées séparément Précautions Pour L’INSTALLATIONEmplacement et installation de la caméra Câblage de la caméra vidéoÉmission de chaleur Réglages DES Interrupteurs DIPParamètres de communications Interrupteur DIP Degré d’humidité élevéNuméro de caméra vidéo déterminé Interrupteur DIP CaméraParamètres de communication RS485 Interrupteur DIP Interrupteur DIP Numéro deInstallation DE LA Caméra Vidéo Installation de la caméra vidéoBague du fil de sécurité Enlever la caméra vidéo Enlever LA CaméraRetrait du couvercle décoratif Branchements Capacités entrée/sortie d’alarmeInformations relatives aux connecteurs accessoires Mesures de précautionsComment assembler le câble et le connecteur acces- soire Active le contrôle de flux de données RS485 AjustUtilise ON/X OFFRéglage de langue Utilisation DU Menu DE ConfigurationAffichage du menu de configuration Réglages DE LA Caméra Vidéo Utilisation du menu de réglage de la CaméraOUI OUI Eleve OUI BASOUI Moyen Sélectionne le mode noir et blanc Résolution RésolutionMode noir et blanc Mode NB Sélectionne le mode couleurLimite de réglage de zoom Limite Zoom Mode de mise au point automatique Mode AFExemple Stabilisateur d’images automatiquePAN/AZIMUTH Sélection du numéro de position PrepoZOOM/FOCUS PAN/AZIMUTHContrôle de lumière ALC/MANUEL TRI OrigSÉQ SuivConfiguration des réglages détaillés d’AUTO PAN DemarageLimit PAN PAN/AZIMUTH ∑BOUTON SET ZOOM/FOCUS ∑BOUTON SET Maintien d’Image Image Memo 12 Réglage du titre de zone Titre ZoneTitre Zoneutil 14 Réglages de nettoyage Nettoyage Réglages DE L’ALARME Utilisation du menu de réglage de ’alarme1POSITION PATR13POSITION 2POSITIONPATR2 PATR3Pour effacer un motif de compensation d’imperfections Réglages SpéciauxUtilisation du menu de réglage spécial Auto Élevé BAL BLC PERM2 Réglage DE Sélection DE ScèneUtilisation du menu de réglage de Sélection de scène Réglages DU Menu Rapide Affichage du menu de réglage rapideRéglages DU MOT DE Passe Réglages du verrouillage du mot de Passe MOT DE PasseNouveau MOT PASSE? Raccourcis Opération du contrôleur RéglageIris Fermer EN CAS DE Problèmes ProblèmeCause et action recommandée 88-89 87-88 Problème Caractéristiques Techniques Vision Nuit OFF CAG ÉlevéSÉQ, TRI, Auto PAN, PATR, Suivi Auto CAG OUI BAS, OUI MOYEN, OUI ELEVE, OFFOFF, SÉQ, TRI, Auto PAN, PATR, Suivi Auto OUI/OFF103 Imprimé au Japon

WV-CS954 specifications

The Panasonic WV-CS954 is a sophisticated and versatile CCTV camera designed for high-performance surveillance applications. This model is equipped with advanced features that make it ideal for various environments, whether indoor or outdoor.

One of the standout characteristics of the WV-CS954 is its exceptional image quality. The camera utilizes a high-resolution 1/3-inch CCD sensor that delivers crisp and clear images with a resolution of 540 TV lines. This ensures that even the finest details are captured, enabling effective monitoring and identification of subjects in various lighting conditions.

The WV-CS954 is also equipped with a powerful 10x optical zoom lens, enabling users to zoom in on subjects without sacrificing image clarity. This feature is particularly useful in scenarios where details are crucial, such as monitoring entry points or observing large areas. The camera also incorporates a digital zoom capability, which further extends its versatility for surveillance needs.

In terms of technology, the WV-CS954 integrates advanced features such as auto focus and auto iris functions, enhancing its performance in fluctuating light conditions. These technologies help maintain optimal exposure and sharpness, ensuring reliable operation regardless of the environment.

Another notable feature of the WV-CS954 is its pan and tilt capability. The camera can be remotely controlled to pan 360 degrees and tilt up to 180 degrees, offering flexible coverage of expansive areas. This allows operators to monitor large spaces efficiently, making it an excellent choice for retail stores, parking lots, and other open environments.

The camera is also designed with durability in mind. Its robust construction and weather-resistant design make it suitable for outdoor use, capable of withstanding various environmental challenges. Additionally, the WV-CS954 is compatible with various mounting options, further enhancing its adaptability in different settings.

For connectivity, the WV-CS954 supports both analog and digital interface options, making it easy to integrate into existing security systems. It is also compatible with Panasonic's comprehensive suite of video management software, enabling seamless surveillance operations.

In conclusion, the Panasonic WV-CS954 is a reliable and feature-rich surveillance camera that offers exceptional image quality, flexible monitoring capabilities, and robust design. Its advanced technologies and user-friendly features make it a top choice for security professionals looking to enhance their surveillance solutions.